Mlove Rangers D5 Karaoke Speaker

Precautions

Please read the instructions carefully. Please follow the instructions carefully. Please store and use this product at room temperature. Do not use this product near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not block the opening of the speaker and do not insert objects into the vents or slots of the music. Do not throw or drop the product to avoid damage. Please charge the speaker with product-rated voltage. If the connection line does not match your device, please contact the dealer. Please keep the volume of the speaker moderate to avoid temporary or permanent hearing impairment. No matter how the equipment is damaged, it must be repaired by a qualified technician. Unauthorized disassembly will void the warranty. Batteries should be replaced by qualified technicians to avoid dangers associated with improper replacement. Do not disassemble or puncture compressed or throw it into fire or water. If it occurs, do not continue to use battery. Do not place battery in high temperature environment. Do not expose batteries, battery packs, should not be exposed to conditions such as sunshine, fire or similar excessive heat conditions. If a power adapter is used to charge the unit, ensure to use a supporting power adapter that meets the standard requirements.

Package Content

• USB Type-C Charging Cable
• Speaker
• User Manual

The packing content based on the actual version of purchased, the picture only for reference.

Key Functions Display

• Power Switch: Power on/off
• Music: Music Boosting
• Previous: Previous Play/Pause
• Next: Next Track
• Loop Play: Short press to start single loop play back and it is valid in Mic Control/Mic Priority mode. The icon will stay on while in single loop mode, the icon will flash slowly on the speaker screen while in single loop mode. Default is all loop.
• Mic Control: Wireless Mic Pair. Long press to start Bluetooth connection, the mic icon blinks on the speaker screen, the icon stays on while connected.
• Local Record: Short press to start recording, press again to pause the recording and save it. Supports Bluetooth or AUX sound recording to Micro SD card/USB.
• Record Reply: Short press to play the recording file and the icon stays on.
• Mute: Short press the mute button to mute the speaker. Press again to resume.
• EQ Sound Mode: Short press to switch between Music and Busking EQ mode. Music mode: Better mode for musical listening. Busking mode: Better mode for outdoor busking.
• Previous: Short press Previous track.
• Pause: Short press to stop/play. Long press the Play/Pause button to disconnect with the current device. While a Bluetooth device is disconnected.
• Next: Short press Next track.
• Record Reply: Short press to play the recording file and the icon stays on.
• Mute: Short press the mute button to mute the speaker. Press again to resume.

Key Functions

• Master Volume Adjust: Clockwise rotating the knob to turn up the volume. Counter-clockwise rotating the knob to turn down the volume.
• Input Audio Volume Adjust: Clockwise rotating the knob to turn up the volume. Counter-clockwise rotating the knob to turn down the volume.
• EQ Volume Adjust: Clockwise rotating the knob to turn up the live EQ volume. Counter-clockwise rotating the knob to turn down the live EQ volume.
• Mic Control: Mic Priority. Short press the Mic Control to turn on or turn off. After the Mic Priority is turned on, the input audio background will decrease automatically when receiving signal from the microphone, press again to resume.
• Loop Play: Short press to start single loop play back and it is valid in Mic Control/Mic Priority mode. The icon will stay on while in single loop mode, the icon will flash slowly on the speaker screen while in single loop mode. Default is all loop.
• Local Record: Short press to start recording, press again to pause the recording and save it. Supports Bluetooth or AUX sound recording to Micro SD card/USB. It will record prior to USB while Micro SD card and USB is using at the same time.
• Mic Control: Wireless Mic Pair. Long press to start Bluetooth connection, the mic icon blinks on the speaker screen, the icon stays on while connected.
• Record Reply: Short press to play the recording file and the icon stays on.
• Mute: Short press the mute button to mute the speaker. Press again to resume.

Screen Display Instructions

• Indoor Music Mode: Good for listening to music indoors. The frequency response curve is flatter and the low-frequency diving is more, which is more suitable for indoor listening to music.
• Outdoor Busking Mode: Good for busking outdoors. The middle and high frequency are more prominent, the human voice and musical instruments have stronger penetration and the sound pressure is larger, which is more suitable for outdoor busking and playing.
• Mute Mode
• Bluetooth Mode
• AUX Mode
• Mode Indication
• Time Display
• Micro SD Card Mode
• USB Mode
• Local Recording Mode
• Battery Display

Parts Instructions

The plugs show in the picture.

• Type-C
• MIC Wired MIC Input port
• MIC Wired MIC Input port
• Multi-channel instrument input port
• Micro SD Card port
• USB port
• AUX input
• Type-C Live Streaming interface
• Earphone port
• Type-C battery charging
• Type-C reverse charging
• LED Charging indicator

Parts Instructions

• MIC Wired MIC Input port: Plug with a wired MIC.
• Multi-channel instrument input port: Plug with 6.35mm Wired MIC, Wooden Guitar, Electronic Instrument, Electric Guitar, etc.
• Micro SD Card port: Insert Micro SD card into the card slot, and the unit will automatically play the audio files stored.
• USB port: Insert USB into the USB interface, and the unit will automatically play the audio files stored.
• AUX input: Universal audio input interface for external audio source devices.
• Type-C Live Streaming interface: Connect to mobile phone for wired Live Streaming.
• Earphone port: Can monitor local music playback and microphone sound.
• Type-C battery charging: Can connect to a PD charger to fast charge.
• Type-C reverse charging: External charging for mobile devices.
• Output max support: 5V/1A
• LED Charging indicator: Red LED is charging, Green LED is fully charged. Red LED is discharging.
• Electronic instruments include: Digital Wind Instrument, Electronic Organ, Electronic Drum, etc.

Bluetooth Connection

Turn on the speaker. Flip the power switch to turn on the Bluetooth icon on the screen will flash and wait for Bluetooth pairing. The default mode is Bluetooth mode. Connect the device: Activate the Bluetooth on your device and search for "Mlove Rangers D5". Once the connection is established, a voice prompt will be heard and the Bluetooth indication light will stay on. When used again, the speaker will reconnect to the last device automatically once the device's Bluetooth is activated.

Tips: Press and hold the button to disconnect current device and set the Mlove Rangers D5 to pairing mode. Short press the button to reconnect last paired device.

Local Recording Function

Start to record: Insert the Micro SD card or USB into the speaker, short press the Local Recording button, the screen recording icon flashes and the digital time counting starts recording.

Save the recording: During the recording, short press the Local Recording button to stop and save the recording.

Recording playback: Short press Rec/Replay button to play the recording file and the icon stays on. Short press Rec/Replay again or short press M button to exit from playing recording file.

Other Instructions: Supports Bluetooth mode or AUX sound recording to Micro SD card/USB. If a Micro SD card and USB are inserted at the same time, the recording files will be stored in the USB by default. When recording and playing back, if the USB and Micro SD card exist at the same time, the USB recording will be played first. When recording, the system will automatically generate a folder named "REC" in the USB or Micro SD card to store the recorded files.

Specifications

• Loudspeaker: 8 inch
• Bass Boost: Bass air duct
• Frequency Response: 20Hz-20KHz
• Charging Port: USB Type-C
• Charging Way: Fast charge (7.5V/2A or above 18W PD charger)
• Charging Time: Around 4 hours
• Charging Protocol: PD fast charging
• Playable Formats: Micro SD card and USB
• Bluetooth Version: 5.0
• Sound Amplifier Function: Wireless Mic sound amplification function, Wired Mic sound amplification function
• Input and Output: 6.35mm Wired MIC/6.35mm Multi-channel instrument input, AUX IN (3.5mm universal audio input interface), Micro SD Card port, USB port, Type-C Live Streaming interface, Earphone monitor (local music playback and mic sound), Type-C reverse charging (External charging for mobile devices, Output max support: 5V/1A)
• Other Functions: Local Recording, Wired Live Streaming
• Product Size: 250mm x 230mm x 385mm
• Product Weight: 4.5kg

FAQ

• Question: Unable to play after booting, no display on the screen.
• Solution: Is the built-in battery of the audio system charged? Please charge it.
• Question: Audio input is silent.
• Solution: Check whether the format of the Micro SD card or USB is correct, the format supported by the speaker is FAT32. Check whether the file in the Micro SD card or USB is a supported format.
• Question: Karaoke silent.
• Solution: Check whether it is switched to external audio source mode and whether the sound has been adjusted.
• Question: Microphone breaks down while speaking.
• Solution: Check whether the microphone volume has been adjusted properly and whether the connection is successful.
• Question: Bluetooth pairing failed.
• Solution: Turn off the speaker and pair again or whether it is connected to other mobile phones.
• Question: The microphone signal is poor.
• Solution: Check whether the distance between the microphone and the speaker is too far or there are obstacles.
• Question: The microphone cannot be paired to speaker.
• Solution: Turn off the speaker and pair again or whether it is connected to other mobile phones.
• Question: The microphone cannot be turned on.
• Solution: Press and hold the power button and the button at the same time for seconds. The ID icon flashes and the microphone will return to the non-ID state at this time. Note: If the ID of the microphone is clear when it needs to be connected to the speaker again, the ID should be repaired according to the way of the newly configured microphone.
• Question: Microphone sound does not work well.
• Solution: When the microphone is in power-on state, press the power button and the button at the same time, the screen will display the ID symbol and the microphone will return to the non-ID state at this time. Note: If the ID of the microphone is clear when it needs to be connected to the speaker again, the ID should be repaired according to the way of the newly configured microphone. After connecting the microphone, switch to the busking (outdoor) mode, turn off the reverb of the corresponding channel to the minimum, turn on the gain to the maximum, and then adjust the gain to the position without screaming, and adjust the treble and bass according to your own voice to get the desired timbre. Finally, increase the reverb appropriately.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.