Toro TimeMaster 30in Lawn Mower Parts Catalog
Form No. 3448-879 Rev A
Model No. 21200—Serial No. 410174255 and Up
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The 'a' represents the reference number of the entire service assembly and the 'b' represents a sequential number unique to each part within the service assembly. For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The 'n' represents the quantity of the part, the 'X' is the multiplication symbol, and the 'y' represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Contents
Housing Assembly
Refer to the diagram for the Housing Assembly.
Ref. | Part Number | Qty. | Description |
1 | 136-5873 | 1 | Housing ASM |
3 | 138-5390-01 | 1 | Frame-30" |
4 | 133-8177 | 1 | Chute |
5 | 3230-5 | 2 | Bolt-CARR |
6 | 139-5415 | 1 | Rod-Release, Handle |
7 | 120-7018 | 1 | Grip-Lever |
8 | 121-9114 | 1 | Bracket-Door, LH |
9 | 121-9115 | 1 | Bracket-Door, RH |
10 | 139-5408 | 1 | Belt Cover ASM |
10:2 | 121-2391 | 1 | Decal-Cover, Belt |
11 | 120-7048 | 1 | Rear Deflector ASM |
11:3 | 131-4514 | 1 | Decal-Warning |
12 | 115-2859 | 1 | Spring-Torsion |
13 | 114-7924 | 1 | Spring-Torsion |
14 | 46-8091 | 3 | Screw-HWH |
15 | 138-3224 | 2 | Bracket-Cable, Traction |
16 | 120-5225 | 1 | Plug-Mulch |
17 | 120-6241 | 1 | Shield-Trailing |
18 | 49-2040 | 8 | Screw-HWHTF |
21 | 117-1092 | 2 | Screw-PTH |
23 | 133-8062 | 1 | Decal-Arrestor, Spark |
24 | 3296-29 | 2 | Nut-Lock, NI |
29 | 130-2352-01 | 1 | Baffle-Control |
31 | 32144-86 | 1 | Screw-HWHTF |
33 | 1-323283 | 1 | Spacer-Shield |
34 | 139-5409 | 1 | Screw-HH |
35 | 137-3087 | 1 | Nut-Hex |
36 | 125-5072 | 1 | Frame Plate Kit |
36:1 | 125-2542 | 1 | Plate-Frame |
36:2 | 3229-3 | 3 | Screw-CARR |
36:3 | 3296-42 | 3 | Nut-Lock, NI |
Spindle and Belt Assembly
Refer to the diagram for the Spindle and Belt Assembly.
Ref. | Part Number | Qty. | Description |
1 | 121-9107 | 2 | Spindle ASM |
1:2 | 120-7935 | 2 | Spacer |
1:3 | 136-5441 | 2 | Bearing-Ball |
2 | 139-1731 | 9 | Screw-Thd Roll, HWH |
3 | 139-6612 | 1 | Shaft-Spindle |
4 | 139-6613 | 1 | Shaft-Spindle |
5 | 121-9100 | 2 | Sprocket |
6 | 130-6664 | 1 | Pulley-Brake, Spindle |
7 | 109-9505 | 2 | Washer-Spring |
8 | 3296-19 | 2 | Nut-Hex |
9 | 63-7400 | 1 | Washer-Rebound |
10 | 133-8102 | 1 | Brake Arm ASM |
11 | 121-2305 | 2 | Washer-Friction, Composite |
12 | 138-3244 | 1 | Spacer |
13 | 9114524 | 1 | Bolt-TAP, HH |
14 | 139-1723 | 4 | Washer-Flat |
16 | 3296-29 | 3 | Nut-Lock, NI |
17 | 131-4529 | 2 | Pulley Kit |
17:2 | 131-4504 | 1 | Adapter-Bore |
17:3 | 125-2533 | 1 | Plug-Cap |
18 | 138-3232 | 1 | Bracket-Idler |
19 | 120-7024 | 2 | Screw-Shoulder, HWH |
20 | 120-3335 | 1 | Belt-Synchronous |
21 | 120-5245-03 | 1 | Guide-Belt, Spindle |
22 | 120-5236 | 2 | Adapter-Blade |
23 | 121-5808 | 1 | Spring-Extension, Brake |
24 | 125-2466 | 2 | Bolt-Blade |
25 | 49-2040 | 2 | Screw-HWHTF |
26 | 120-7082 | 1 | Pulley-Idler |
27 | 322-6 | 1 | Screw-HH |
28 | 3296-47 | 1 | Nut-Lock, NI |
29 | 116-6358-03 | 2 | Blade-Rotary |
30 | 121-2336 | 1 | Spring-Flat |
33 | 322-9 | 1 | Screw-HH |
35 | 133-1964 | 1 | Spacer |
Side Discharge Chute Assembly
Refer to the diagram for the Side Discharge Chute Assembly.
Ref. | Part Number | Qty. | Description |
1 | 94-8072 | 1 | Decal-Danger |
6 | 133-2630 | 1 | Side Deflector Service ASM |
6:1 | 125-5091 | 1 | Deflector-Side |
6:2 | 127-0721 | 1 | Spring-Torsion, Cover |
6:3 | 112-6416 | 1 | Bracket-Cover |
6:4 | 99-5291 | 1 | Rod-Cover |
7 | 121-2319 | 1 | Chute-Discharge, Side |
8 | 133-9289 | 1 | Fitting-Washout |
8:2 | 133-9290 | 1 | O-Ring |
9 | 139-1700 | 2 | Screw-HWH, Thd Roll |
11 | 95-3270 | 1 | Connector-Hose |
12 | 120-9570 | 1 | Decal-Warning |
13 | 125-5092 | 1 | Decal-Placement, Foot |
Bag Assembly
Refer to the diagram for the Bag Assembly.
Ref. | Part Number | Qty. | Description |
1 | 121-5766-03 | 1 | Frame-Bag |
2 | 121-5770 | 1 | Bag-Grass |
Engine and Belt Assembly
Refer to the diagram for the Engine and Belt Assembly.
Ref. | Part Number | Qty. | Description |
2 | 137-9176 | 1 | Pulley-Engine |
3 | 121-5765 | 1 | V-Belt |
4 | 120-9470 | 1 | V-Belt, Traction |
5 | 139-1734 | 1 | Guide-Belt, Wa |
6 | 95-1727 | 3 | Screw-Taptite |
7 | 3290-465 | 1 | Washer-Belleville |
8 | 26-0671 | 1 | Screw-HH |
11 | 32144-1 | 1 | Screw-Taptite |
12 | 131-0889-03 | 1 | Guard-Engine |
13 | 126-2713 | 2 | Screw-HHF |
14 | 14D9350111F1 | 1 | Engine-Briggs |
Note: Not serviced separately. Obtain parts from www.briggsandstratton.com
Front Wheel and Height-of-Cut Assembly
Refer to the diagram for the Front Wheel and Height-of-Cut Assembly.
Ref. | Part Number | Qty. | Description |
1 | 46-8091 | 3 | Screw-HWH |
2 | 120-9535 | 1 | Grip-Lever |
3 | 119-4042 | 2 | Nut-HF, NI |
4 | 136-5875 | 2 | Bushing-Pivot, Front |
5 | 139-1753 | 1 | Front Axle ASM |
6 | 120-7037-03 | 1 | Plate-HOC, LH |
7 | 120-7038-03 | 1 | Plate-HOC, RH |
8 | 120-7043 | 1 | Arm-Spring |
9 | 125-2510 | 2 | 8 Inch Wheel ASM |
10 | 125-5027 | 1 | Front Cover ASM |
10:2 | 120-7047 | 1 | Artwork-Toro Timemaster |
11 | 700057 | 1 | Screw-HWH |
12 | 3230-23 | 6 | Bolt-CARR |
13 | 3296-29 | 6 | Nut-Lock, NI |
15 | 130-6658 | 4 | Screw-Flange, Plastic |
Rear Wheel and Height-of-Cut Assembly
Refer to the diagram for the Rear Wheel and Height-of-Cut Assembly.
Ref. | Part Number | Qty. | Description |
1 | 137-4796 | 1 | Grip-Lever, Lift |
2 | 121-5799 | 1 | Conduit-Convoluted |
3 | 49-2040 | 2 | Screw-HWHTF |
4 | 119-4042 | 2 | Nut-HF, NI |
5 | 104-8699 | 1 | Bearing-Ball |
7 | 106-5681 | 1 | Pin-Stop |
8 | 133-2603 | 2 | Bearing-Ball |
9 | 110-7191 | 2 | Washer-Thrust |
10 | 131-5399 | 2 | Gear-Pinion, 15T |
12 | 120-3342-03 | 1 | Plate-HOC, LH |
13 | 120-3343-03 | 1 | Plate-HOC, RH |
14 | 120-5208 | 1 | Arm-Spring, Rear |
15 | 120-5209 | 1 | Key-Arm, Spring |
16 | 136-5929 | 2 | Retainer-Bearing |
17 | 131-9665 | 1 | Transmission Kit |
17:1:1 | 130-2370 | 1 | Transmission Pulley Kit |
17:2 | 130-2369 | 2 | Pin-Snap |
17:3 | 32151-61 | 1 | Ring-Retaining |
18 | 120-6233 | 2 | Cover-Gear |
19 | 140-4048 | 1 | Rear Axle ASM |
20 | 125-2509 | 2 | 10 Inch Wheel Gear ASM |
21 | 138-3233 | 1 | Mount-Bearing |
22 | 120-7026 | 1 | Spring-Extension |
23 | 120-7027 | 1 | Spring-Extension |
24 | 121-5800 | 2 | Conduit-Convoluted |
25 | 701243 | 8 | Screw-Thd Roll, HWH |
26 | 32144-4 | 1 | Screw-HWH |
28 | 36-4780 | 2 | Washer-Plain |
29 | 138-5338 | 1 | Bracket-Stop |
30 | 3296-47 | 1 | Nut-Lock, NI |
31 | 125-2497 | 1 | Decal-HOC, Rear |
Note: Not illustrated
Handle and Electrical Assembly
Refer to the diagram for the Handle and Electrical Assembly.
Ref. | Part Number | Qty. | Description |
1 | 120-5204-05 | 1 | Handle-Lower |
2 | 132-4484-05 | 1 | Handle-Upper |
3 | 105-6842 | 1 | Guide-LH |
4 | 105-6841 | 1 | Guide-RH |
5 | 104-8678 | 1 | Handle-Control |
6 | 136-7150 | 1 | Bar-Control, Traction |
7 | 127-6842 | 1 | Lever-Traction |
8 | 120-7025 | 2 | Bolt-Shoulder, HHF |
9 | 32144-1 | 1 | Screw-Taptite |
10 | 133-1998 | 1 | Cable-Brake |
12 | 127-6867 | 1 | Cable-Traction |
14 | 140-4357 | 1 | Decal-Battery Charging |
15 | 132-4516 | 2 | Plug-Square |
17 | 136-7166 | 1 | Spring-Torsion |
18 | 117-1019 | 1 | Decal |
19 | 108-3788-03 | 1 | Bail-Brake |
20 | 106-9169 | 1 | Screw-HWH |
21 | 107-7462 | 1 | Spring-Torsion |
22 | 107-7463 | 1 | Spacer |
23 | 138-3220 | 1 | Lever |
24 | 32128-17 | 1 | Nut-Lock, Flange |
25 | 112-8884 | 1 | Knob |
26 | 3290-337 | 1 | Nut-Speed |
27 | 3296-29 | 2 | Nut-Lock, NI |
28 | 92-2260 | 2 | Screw-Handle |
29 | 117-5976 | 2 | Knob-Handle |
30 | 114-7988 | 1 | Guide-Cable |
31 | 130-2343 | 1 | Spacer |
32 | 104-9368 | 1 | Plug-Dome |
33 | 131-0847 | 1 | Handle-Assist, Traction |
34 | 99-6005 | 2 | Bolt-Carriage |
35 | 137-4808 | 2 | Nut-Acorn |
36 | 106-8397 | 1 | Battery-Wet |
37 | 108-3795 | 1 | Housing-Switch, Key |
38 | 321-50 | 1 | Screw-HH |
39 | 92-7729 | 1 | Anchor-Cable, Upper |
40 | 23-0660 | 1 | Switch-Starter |
40:1 | 218-461 | 1 | Nut-HH |
40:2 | 3254-5 | 1 | Washer-Lock |
41 | 108-3796 | 1 | Cover-Swtch |
42 | 32144-111 | 2 | Screw-PPH |
43 | 700918 | 1 | Key |
44 | 136-9126 | 1 | Charger, Battery (12V) |
45 | 108-9751 | 1 | Decal-Switch, Ignition |
46 | 136-5895 | 1 | Harness-Wire |
46:4 | 99-6124 | 1 | Fuse-40 Amp |
47 | 108-0987 | 1 | Foam-Battery |
49 | 120-3329 | 1 | Cover-Battery |
57 | 3256-1 | 1 | Washer-Flat |
58 | 3296-73 | 1 | Nut-Lock, NI |
99 | 614249 | 3 | Tie-Cable |
Note: Not illustrated
Attachments and Accessories
For 21200 TimeMaster 30in Lawn Mower
Product Name | Model/Part |
Hi-Lift Repl Blade Kit Timemaster | 20122P |
Mower Cover | 490-7461 |
Bagger Kit | 59165 |
Lawn Striping Kit with 30in Roller | 20602 |
Bag-Walk Behind (Toro) | 490-7318 |
Oil-30/10W-30 Synthetic (Quart) | 138-6053 |
Summer Oil-Case of 24 (20oz Bottles) | 38916 |
4-Cycle Fuel, Snow And Lawn 32oz Can | 131-3823 |
Fuel Stabilizer .05 oz | 130-2393 |
Toro Premium Fuel Treatment 12 Oz Bottle | 131-6572 |
Toro 4-Cycle SAE 30 Oil (32oz Bottle) | 38903 |