YR2188B/YR2118B Wireless Transmitter Instruction

Notes

1. The button function and combination button function are effective for wireless receivers with corresponding functions.

2. To use the button function and combination button function, select the current remote control channel to transmit signal.

3. When used with different wireless receivers, the settings and using methods are a little different. See Product Instructions for getting more details.

Basic Operation

Switching On Touch Control Function

Press and hold the [Stop] and [Up/Open] buttons simultaneously for 5 seconds to enter touch control function status. Then, press [Channel Setting] to confirm. Alternatively, press and hold [Stop] and [Down/Close] for 5 seconds, then press [Channel Setting] to confirm to switch off touch control.

Setting Remote Control Channel

Step 1: Enter Setting Code Status

Press the motor's [setting code] button for 3 seconds until the LED indicator lights up.

Step 2: Choose Channel

Use the [channel choose left] or [channel choose right] buttons to select the desired channel.

Step 3: Transmit Current Channel Code

Press the [channel setting] button on the back of the remote using a sharp tip. The motor's LED indicator will flash.

Step 4: Confirmation

Press the motor's [setting code] button to confirm and complete the channel setting process.

Deleting Remote Control Channels

Step 1: Enter Setting Code Status

Press the motor's [setting code] button for 3 seconds until the LED indicator lights up.

Step 2: Delete Remote Control Channels

Release the button. Then, press the motor's [setting code] button for 7 seconds until the LED indicator turns off to finish the clear channel process.

Warranty

Series motors carry a three-year warranty from the date of invoice. Fictitious damage and dismantling are exclusive of warranty.

Specification

Channel Selection Diagram:

The remote offers channel selection via [Channel Choose Left] and [Channel Choose Right] buttons. It controls functions like Up tilt (75%), Horizontal position (50%), and Down tilt (25%). The [Channel Setting] button is used for configuration.

Remote Control Details:

Front: Contains buttons for operation. Back: Contains the [Channel Setting] button.

RF Remote Details: Frequency: 433.92MHz ASK, Battery: 3V CR2032.

Button Functions

[Up/Open]

Opens the curtains.

[Stop]

Stops the curtain.

[Down/Close]

Closes the curtains.

[Up Tilting/75%]

Tilts the slats upwards. A short press operates the tilt function. A long press (1.5 seconds) stops the motor at an intermediate position (default 75% tilt).

[Horizontal Position/50%]

Tilts the slats to a horizontal position. A short press sets the horizontal position. A long press (1.5 seconds) stops the motor at an intermediate position (default 50% position).

[Down Tilting/25%]

Tilts the slats downwards. A short press operates the tilt function. A long press (1.5 seconds) stops the motor at an intermediate position (default 25% tilt).

[Channel Setting]

Open the remote cover. Use the [channel setting] button to set codes. This allows receiving signals and handling non-matching channel setting buttons after the remote controller or motor enters setting code status.

Combination Button Functions

[Channel Choose Left] + [Stop]

Change direction. Press the motor's [setting code] to confirm after the remote controller or motor enters setting code status, then match the change direction code.

[Channel Setting] + [Up/Open]

Long press for 5 seconds to enter the up/open limit setting status. First, press and hold [Channel Setting], then press [Up/Open]. After the motor reaches the desired up limit position, press the motor's [setting code] to confirm.

[Channel Setting] + [Stop]

Long press for 5 seconds to clear limits. First, press and hold [Channel Setting], then press [Stop].

[Channel Setting] + [Down/Close]

Long press for 5 seconds to enter the down/close limit setting status. First, press and hold [Channel Setting], then press [Down/Close]. After the motor reaches the desired down limit position, press the motor's [setting code] to confirm.

[Up/Open] + [Down/Close]

Used for external control mode change. Press the motor's [setting code] to confirm after the remote controller or motor enters setting code status, then match the code.

[Channel Setting] + [Up Tilting/75%]

Short press for setting intermediate position 1. Long press for setting 75% position. First, press and hold [Channel Setting], then press [Up Tilting/75%].

[Channel Setting] + [Horizontal Tilting/50%]

Short press for setting intermediate position 2. Long press for setting 50% position. First, press and hold [Channel Setting], then press [Horizontal Position/50%].

[Channel Setting] + [Down Tilting/25%]

Short press for setting intermediate position 3. Long press for setting 25% position. First, press and hold [Channel Setting], then press [Down Tilting/25%].

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.