iFAN 12" Stand Fan with Convertible Height Air Circulator

Product Overview

The iFAN 12" Stand Fan with Convertible Height Air Circulator (Model IF9669) is designed to provide efficient air circulation with adjustable height for versatile use as both a stand fan and a table fan. It features a remote control for convenient operation.

Key Features:

• Convertible height: Can be used as a stand fan or table fan.
• Remote control operation.
• Multiple speed settings.
• Timer function.
• Swing function for oscillating airflow.
• Ionizer for air purification.

Parts & Description

The iFAN 12" Stand Fan consists of the following components:

• 1. Front Grille
• 2. Fan Blade
• 3. Back Grille
• 4. Head Tilt Holder
• 5. Control Panel
• 6. Main Body Assembly
• 7. Main Body Screw
• 8. Extension Pole
• 9. Height Adjustment Screw
• 10. Outer Pole
• 11. Base
• 12. Remote Control
• 13. Main Body Holder

The control panel features buttons for Timer, Power, Speed, Ionizer, and Swing. The remote control has corresponding buttons for ON/Speed, Ionizer, Timer, Swing, and Power OFF.

How to Assemble

Warning: DO NOT operate the fan with any of its parts unassembled. The entire assembled unit works as a single appliance. The fan must only operate in the upright position. Any other position will be hazardous.

1. Unpack all parts and place them on the floor.
2. Tighten the 4 Base screws into the Base (11) by turning clockwise.
3. Insert the Outer Pole (10) containing the Extension Pole (8) into the Base (11). Screw the Outer Pole (10) clockwise into the Base (11) and tighten securely.
4. Adjust the height by pulling the Extension Pole (8) out of the Outer Pole (10) to the desired height and tighten using the Height Adjustment Screw (9).
5. Loosen the Main Body Screw (7) and insert the Main Body Assembly (6) onto the top of the Extension Pole (8) or Main Body Holder (13). Secure it by tightening the Main Body Screw (7).
6. For table fan configuration, insert the Main Body Holder (13) into the Base (11) and screw clockwise. Then, insert the Main Body Assembly (6) onto the Main Body Holder (13) and secure with the Main Body Screw (7).
7. Be careful when handling the Main Body Assembly (6) as it is heavy.

Warnings and Safety Precautions

Read this booklet carefully for important instructions on safe installation, use, and maintenance.

• Always ensure the appliance is used for its intended purpose.
• Before use, check the appliance and power cable for damage. Do not operate if damaged.
• Ensure the power rating matches your electrical supply and the socket is properly grounded.
• Do not use multiple sockets, adapters, or extension cables unless absolutely necessary and compliant with safety regulations.
• Do not use external timers or remote control devices not specified in the manual.
• Use only original iFAN components and accessories.
• Keep packing materials away from children.
• Do not use or store the appliance near heat sources or in explosive environments.
• Do not place the appliance on surfaces that can be damaged by heat.
• Ensure adequate clearance around the appliance (at least 10 cm on sides, 20 cm on top).
• Avoid placing the power cable on abrasive or sharp surfaces or in high-traffic areas.
• Do not operate near open windows during rain.
• Store and use the appliance indoors only.
• Do not cover the appliance during operation.
• Never insert objects or body parts into the fan guards.
• Do not force the fan blades to turn.
• Do not touch the inside of the fan while operating.
• Do not push buttons forcefully.
• Do not use the appliance near curtains or textiles.
• Do not use gasoline, thinners, or benzene as cleaners.
• Operate for a maximum of 6 hours continuously, followed by a 30-minute break to prevent motor overheating. Limit total usage to 12 hours per day.
• Do not leave the appliance unsupervised during operation.
• Do not touch the appliance with wet body parts.
• Do not immerse the Motor Unit in water or other liquids.
• Unplug the power cable by holding the plug firmly with dry hands.
• Unplug the appliance when not in use for extended periods, before cleaning, or maintenance. Allow to cool for 30 minutes before cleaning or maintenance.
• In case of malfunction, switch off immediately and check the cause.
• If smoke is observed, switch off immediately.
• This appliance is for household use only.
• Children aged 8 and above can use the appliance under supervision. Cleaning and maintenance should be done by children older than 8 under supervision. Keep the appliance and cable away from children under 8.

Save these instructions.

Operation

To Turn ON:

1. Press the Power Button on the Control Panel or Remote Control.
2. Select desired fan speed (Low, Mid, High) using the Speed Button.
3. (Optional) Set the Timer (1, 2, 4, or 8 hours) using the Timer Button. The appliance will stop automatically when the timer reaches 0.
4. Adjust the Fan Head angle by tilting it upwards or downwards.
5. Press the Swing Button to activate oscillation for side-to-side airflow. Press again to stop oscillation.
6. Press the Ionizer Button to release negative ions for air purification. Press again to stop.

To Turn OFF:

1. Press the Power Button on the Control Panel or Remote Control.
2. Switch off the socket switch and detach the plug from the wall socket.

How to Clean

1. Switch the appliance OFF and allow it to cool down completely.
2. Disassembly: Unscrew the screws holding the Front and Back Grilles together. Remove the Front Grille.
3. Clean the exterior parts, including grilles and fan blades, with warm water and dish-washing agent using a soft cloth. Wipe dry immediately.
4. DO NOT use gasoline, thinners, or benzene as cleaners.
5. Never run water over the appliance to prevent water from seeping inside.
6. Use a vacuum cleaner to remove dust from the air inlet and outlet.
7. Assembly: Unscrew the screws on the Back Grille and reassemble the grilles, tightening the screws securely.

Environmental Tip

Dispose of this appliance responsibly at the end of its life. Do not dispose of it as unsorted municipal waste. Recycle it at your local recycling center.

Specifications

Dimensions: Height approximately 1015mm, Base width approximately 400mm.

Warranty

Warranty Conditions:

• This warranty covers defective materials and manufacturing faults for two years from the date of purchase.
• The warranty does not cover normal wear and tear, consumable materials, accessories, or maintenance costs.
• The warranty is void if parts are damaged by misuse, accidents, negligence, alterations, unauthorized repairs, or if the serial number is tampered with.
• Service is provided at PowerPac Electrical Pte Ltd, 5 Changi South Lane #03-01, Singapore 486045. A transport fee applies for doorstep service.
• Proof of purchase (original invoice or valid receipt) is required for warranty service. Online registration is preferred.
• The warranty is valid in Singapore only.
• Defects caused by household pests, fire, lightning, natural disasters, pollution, abnormal voltage, or generator use are not covered.

PowerPac Electrical Pte Ltd will provide free services for the appliance within the warranty period, subject to the terms and conditions.

Safety Features

A Thermal Fuse is installed in the Fan Head. If the motor overheats, the Thermal Fuse will activate and cut off the electric current to the appliance.