StarTech.com | IT Pro's Trusted Source for Connectivity Accessories
StarTech.com Support
User Guide for StarTech com models including: AF212C, AF212C 1-Port 2.5GbE PoE Plus Injector, 1-Port 2.5GbE PoE Plus Injector, 2.5GbE PoE Plus Injector, PoE Plus Injector, Injector
StarTech.com AF212C-POE-INJECTOR
File Info : application/pdf, 2 Pages, 95.42KB
DocumentDocumentQuick-Start Guide 1-Port 802.3at 30W 2.5Gbps PoE+ Injector Product ID AF212C-POE-INJECTOR Top 1 3 1 Component 1 Mounting Holes Function · Mount the PoE Injector to an appropriate surface 2 Power Input · Connect the included 6ft (1.8m) NA Power Cord 3 Power LED · Solid Green: PoE Injector is receiving power 2 · Connect an Ethernet Cable to a PD (Powered 4 PoE+ Port (Data + PoE) Device) · Supports 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps · Supports 802.3af and 802.3at 5 Data Port · Connect an Ethernet Cable to a Network Device · Supports 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps Product Information For the latest product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/AF212C-POE-INJECTOR Requirements · Network Cables x 2 Package Contents · PoE Injector x 1 · 6ft (1.8m) NA Power Cord x 1 · Quick-Start Guide x 1 Installation (Optional) Mount the PoE Injector 1. Determine the Mounting Surface and Location for the PoE Injector. 2. Mount the PoE Injector to the desired Mounting Surface using the appropriate Mounting Hardware (e.g. Wood Screws) through the built-in Mounting Holes. 4 5 Install the PoE Injector 1. Connect an Ethernet Cable from the Source Network Device (i.e., router, modem, or non-PoE switch) to the Data Port on the PoE Injector. 2. Connect an Ethernet Cable to the PoE+ Port on the PoE Injector. 3. Connect the other end of the Ethernet Cable used in Step 2 to either a PD (Powered Device) or a PoE Splitter to separate Data and Power. 4. Plug the included NA Power Cord into an AC Outlet and connect it to the Power Port, located on the rear of the PoE Injector. Verify that the Power LED is illuminated. To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support. Manual Revision: May 27, 2024 Regulatory Compliance FCC - Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user's authority to operate the equipment. Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. StarTech.com Ltd. 45 Artisans Cres London, Ontario N5V 5E9 Canada StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A. StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp