Vaporesso GTX ONE PRO User Manual

SPECIFICATION

ENLARGED VIEW

Drip Tip

Refilling Top Cap

Air-inlet Ring

Air-Inlet Port

Glass Tube

Base

Power Button

0.87” OLED Screen

Lock Button

"Up" Button

"Down" Button

Type-C USB Port

Figure 1: Replace The Coil

Diagram showing the process of replacing the coil. Steps include:

1. Open the tank base.
2. Pull out the old coil.
3. Insert the new coil.
4. Close the tank base.

Figure 2: Fill E-liquid

Diagram showing the e-liquid filling process:

1. Open the top cap.
2. Fill e-liquid through the refill hole (Ø1.2mm).
3. Reattach the top cap.
4. Wait 5 minutes for the e-liquid to soak into the coil completely.

Figure 3: User Interface

Diagram illustrating the device's screen interface:

• Battery Level: Indicates the remaining battery charge.
• Vape Mode: Shows the current vaping mode (e.g., PULSE, ECO, SMART).
• Wattage: Displays the current power output.
• Puff/Time Counter: Tracks the number of puffs or vaping time.
• Resistance: Shows the resistance of the installed coil.
• Smart Function On/Off: Indicates if the smart function is enabled.
• Lock On/Off: Shows the status of the device lock.

USE INSTRUCTIONS

1. Install the Tank: Install the tank to the battery by screwing the 510 thread. Ensure a firm connection.
2. Replace the Coil: Unscrew the thread base, pull out the old coil, install a new coil, and reattach the base.
3. Fill E-liquid: Unscrew the top cap, fill e-liquid through the hole, reattach the cap, and wait 5 minutes for the coil to soak.
4. Adjust the Airflow: Rotate the air-inlet ring on top of the tank to adjust airflow.
5. Power on the Device: Click the power button 5 times within 2 seconds to turn the device on or off.
6. Power Adjustment: GTX ONE PRO uses the GTX coil platform. Refer to the suggested power settings before vaping.
7. Start Vaping: Press the power button to begin vaping.
8. Charge the Battery: Connect the Type-C cable to the battery. The battery indicator and charging time will be displayed on the screen.
9. Lock or unlock the device: Slide the lock button to lock the MOD, and slide back to unlock.
10. Settings: Press the power button 3 times continuously to enter the menu settings.

Vaping Modes:

• PULSE MODE: Enhances vaping experience with constant voltage output for optimal flavor, throat hit, nicotine satisfaction, and consistent temperature clouds.
• ECO MODE: A normal wattage output mode. Adjust wattage based on coil resistance for longer vaping time.
• LOCK (WATT LOCK): Locks the wattage adjustment to prevent accidental changes. Power button and other settings remain active.
• SMART ON/OFF: When enabled and a tank is installed, the system automatically recommends the best power. (Note: SMART FUNCTION works only with the GTX coil platform).
• PUFF: Allows checking the 5-day puff counter and clearing puff data after confirmation.

PROTECTIONS

The device includes several protection features:

• Overtime Protection: Stops working if vaping exceeds 10 seconds continuously (displays "OVER TIME").
• Low Resistance Protection: Stops working if extremely low resistance is detected (displays "AT SHORT").
• High Resistance Protection: Stops working if high resistance is detected (displays "AT CHECK").
• No-load Protection: Stops working if no tank is detected (displays "AT CHECK").
• Short-circuit Protection: Stops working if a short-circuit is detected (displays "AT SHORT").
• Low Voltage Protection: Prevents operation if battery voltage is too low (displays "LOW BAT").
• Over Discharge Protection: Stops working if battery voltage is extremely low during vaping (displays "LOW BAT").
• Over Charge Protection: Stops charging when the battery is fully charged.
• USB Input Protection: Stops charging if USB detects input voltage exceeding the rated voltage.

CAUTIONS

1. Turn off the device when not in use.
2. Do not leave the charging device unattended.
3. Avoid dropping, throwing, or misusing the device, as this may cause damage.
4. Use a standard USB output charger with appropriate current and voltage.
5. Keep away from water, flammable gases, and liquids.
6. Do not expose the device to direct sunlight, dust, moisture, or mechanical shock.
7. Do not expose the device to extreme temperatures (recommended range: 10-40°C during use and storage).
8. EEE Recycling: Dispose of the product according to local regulations for electrical and electronic equipment.
9. Battery Recycling: Dispose of the product battery according to local regulations for used batteries.
10. Only have your device repaired by VAPORESSO. Do not attempt self-repair.
11. Keep the connection pins between the battery and pod clean for optimal performance.
12. If traveling by air or in environments with significant air pressure changes, store the pod and batteries separately and avoid liquid injection to prevent leaks and damage.

WARNINGS

This refillable electronic cigarette is intended for use with compatible e-liquids, which may contain nicotine. Nicotine is an addictive substance and is not suitable or recommended for use in the following cases:

This device is not suitable for:

• Persons under the legal smoking age.
• Individuals with heart disease, stomach or duodenal ulcers, liver or kidney problems, chronic throat conditions, or breathing difficulties due to bronchitis, emphysema, or asthma.
• Individuals with an overactive thyroid gland or experiencing phaeochromocytoma (an adrenal gland tumor affecting blood pressure).
• Individuals taking certain medications (e.g., Theophylline, Ropinirole, Clozapine).

This device is not recommended for:

• Non-smokers.
• Pregnant or breastfeeding women.

Potential side effects of nicotine use:

If you experience any of the following after using nicotine-containing e-liquid, consult a healthcare professional:

• Feeling faint, Nausea, Dizziness, Headache, Coughing, Irritation of the mouth or throat, Stomach discomfort, Hiccups, Nasal congestion, Vomition, Chest palpitations/pain, or irregular heart rate.

This device should not be used by persons under the legal smoking age.

WARRANTY STATEMENT

Limited 90-Day Warranty Terms

VAPORESSO offers a limited 90-day warranty from the date of purchase. Valid proof of purchase (invoice/receipt) is required for warranty claims. If no valid proof is available, the warranty period starts from the date of manufacture.

Terms of Warranty:

The following items/situations are NOT covered under warranty:

• Opened or used items (e-liquids, cartridges, coils, drip tips, tanks, atomizers, rechargeable batteries).
• Non-defective items that have been opened and used.
• Product problems caused by human damage or misuse.
• Hardware that is cracked, dismantled, or modified.
• Products found faulty upon arrival must be reported immediately before use.

Vaporesso disclaims all implied warranties beyond the stated 90-day period.

Warranty Claim Procedure:

1. Contact the seller for repair or replacement.
2. Scan the QR code for product-related questions.

Information Needed for Warranty Claim:

• Proof of purchase.
• Product name and quantity.
• Batch number (VSGXXXX) and Security code (with pictures).
• Description of the product problem.
• Videos or pictures reflecting the product problem.

Notes: Warranty claim verification typically takes 5-10 days. Replacements will be arranged upon approval. If the original replacement is out of stock, an item of equal value will be shipped with your consent.

VAPORESSO reserves the right of final interpretation of the warranty claim service. Keep the warranty card for after-sale service; warranty is void if lost.

Manufacturer Information

Manufacturer: Shenzhen Smoore Technology Limited

Address: Building 8, Dongcai Industrial Park, Gushu Town, Baoan District, Shenzhen, China 518102

Made in China

UK Contact:

Name: SMOORE UK CO., LTD

Address: 33 Cavendish Square, London W1G 0PW

Contact: +44 07759772593

Legal Or Natural Contact Person Within The Union:

Name: Ascend vape

Address: 13 Rue Camille Desmoulins 92130 Issy-Les-Moulineaux, France

[CE certification] [Recycling symbol] [Battery disposal symbol]

Website: www.vaporesso.com