H10 Electric Scooter User Manual

Preface

Thank you for choosing the H10 Smart Electric Scooter. The electric scooter is a new type of fashionable outdoor transportation tool. It offers advantages such as low-carbon emission, environmental protection, improved travel efficiency, and serves as a relaxing & exercising activity.

The H10 electric scooter features a simple structure, light weight, and a stylish shape. The scooter body utilizes an integrated magnesium alloy design, making it light, rigid, and providing excellent shock absorption performance. It is equipped with a high-definition LED dashboard, which is beautiful, intelligent, and technologically advanced.

Please read this user manual carefully before using the scooter.

Part One: Function Introduction

1: Scooter Schematic Diagram

The scooter consists of the following parts:

1: Grip
2: Thumb power throttle
3: Dashboard
4: Front headlight
5: Front Reflector
6: Left brake lever
7: Folding stem
8: Folding Safety lock
9: Folding Safety lever
10: Aluminum label
11: Front mud guard
12: Driven wheel
13: Drum brake
14: Kick stand
15: Foot pad
16: Hook buckle
17: Taillight
18: Rear mud guard
19: Side Reflector
20: Motor wheel

2: Dashboard Schematic Diagram

The dashboard displays:

1: Speed display
2: Speed unit display (KM/h or MPH)
3: Single trip mileage display/total mileage display
4: Gear display
5: Headlight display
6: Fault display
7: Bluetooth display
8: Battery Power display
9: Gear switch / mileage switch button
10: Light indicator

3: Key Function Introduction

Long press the power switch button to turn on, long press again to turn off.
Short press the power switch button to turn on/off the headlights.
Short press the gear button to switch gears 1, 2, or 3.
Long press the gear button to switch between single trip mileage and total mileage display.

Part Two: Scooter Assembly

1: Accessories Check

Ensure all accessories are present:

1: User Manual
2: Mounting screws (4 pcs)
3: Allen wrench (2.5mm)
4: Charger

2: Front Tube Assembly

Follow these steps for front tube assembly:

After unpacking, place the scooter on a flat ground. Open the kick stand [kick-stand-icon].
Connect the waterproof cable of the front tube and folding stem [cable-connection-icon].
Insert the front tube into the folding stem [insertion-icon].
Tighten the stem and lock the folding wrench [lock-icon]. A 'click' sound indicates the stem is locked in place.

3: Power On Testing

Perform the following tests after installation:

Power on inspection
Gear shift inspection
Front headlight inspection
Braking force inspection

Part Three: Learn to Ride

Notice: Beginners learning electric scooters are at risk of falling and injury. Please wear helmets and protective gear at all times.

1: Riding Operation Method

Starting and Riding:

The scooter requires a kicking-off start. When power is on, place one foot on the pedals and use the other foot to push off the ground.
When the scooter is sliding, place the second foot on the pedals.
When the scooter is stable, push the right power throttle to accelerate.

Braking:

Hold the left brake lever tightly when braking. The front wheel drum brake and rear electronic brake engage simultaneously.

2: How to Charge

Notice:

1: When the scooter battery power is low, charge it promptly to avoid damage to the battery.
2: When charging is complete, unplug the charging port in time; do not charge the battery for a long time.

The charging port is located at position "1" on the front right side of the scooter. To charge:

Open the dust-proof cap.
Insert the charging port.
The indicator light will be red while charging and turn green when charging is complete.
Finally, unplug the charging port and fasten the dust-proof cap.

3: Folding and Carry

Folding Procedure:

Turn off the power.
Lift up the safety lock [lock-lift-icon].
Open the safety lever [lever-open-icon].
Fold the folding stem to the rear part of the scooter [stem-fold-icon].
Lift the hook buckles on the rear mud guard [buckle-lift-icon].
Buckle the 2 hooks together to complete the folding [hook-buckle-icon].

After folding, you can take the scooter on buses, metros, and in car trunks.

Part Four: Safety Instructions

1: Prohibited Items

1. [prohibited] When the scooter is turned on and needs to be moved, do not press the thumb power throttle.
2. [prohibited] Do not hang backpacks or other forms of objects on the handlebars when riding the scooter.
3. [prohibited] Do not drive the scooter in the rain.
4. [prohibited] Do not press the power throttle to accelerate when going downhill.
5. [prohibited] Do not drive at high speed on bumpy roads. [prohibited] Do not ride toward steps which are more than 2cm at high speed.

2: Dangerous Operation

1. [prohibited] During riding, hold the handlebars with both hands; do not drive with one hand.
2. [prohibited] During riding, do not lift one foot or perform other dangerous actions.
3. [prohibited] Do not drive in water with a depth of more than 2cm.
4. [prohibited] During high-speed driving, do not swing the scooter body or turn the handlebar a lot.
5. [prohibited] Do not step on or stand on the rear mud guard during riding.

Part Five: Scooter Maintenance

1: Brake Debug

When the scooter has been driven for a period of time and the brake is too loose, you can turn the adjusting nut (position 1) on the drum brake counterclockwise to adjust it to the proper position. Conversely, if the brake is too tight, turn the adjusting nut clockwise.

2: Front Tube Debugging

If the front tube of the scooter is shaking, use a 2.5MM hex socket tool to tighten the four screws at the joint between the front tube and the stem (position 1) counterclockwise. Tighten the two screws of the stem base (position 2) with a 5MM hexagon socket.

3: Folding Stem Shaking Debugging

When riding for a period of time and the gap between the folding stem becomes too large, use tools to adjust the folding mechanism on the folding base:

Use a 2.5mm hex socket tool to unscrew the set screw clockwise (position 1).
Use a 3mm hex socket tool to tighten the folding mechanism screw counterclockwise to the proper position (position 2).
Use a 2.5mm hex socket tool to tighten the set screw (position 3).

Part Six: Scooter Parameter Sheet

No	Content	Parameter
1	Unfold scooter size L×W×H	10864831198 mm
2	Folding scooter size L×W×H	1086483485 mm
3	Min. Turning angle	830 mm
4	Net Weight	About 15 kg
5	Max. Climbing angle	14°
6	Battery capacity	36V7.5Ah/36V10.4Ah
7	Motor Rated power	300 W rear drive
8	Max speed	20KM/25 km/h
9	Gear Switch	First gear: 15KM/h; second gear: 20KM/h; third gear: 25KM/h
10	Typical Range	25-30KM/35-40KM
11	Max load	100 kg
12	Wheel size	9 inch front and rear
13	Brake type	Front: drum brake+ Rear EABS
14	Braking Distance	< 10 m (Dry state)
15	Charger input voltage	AC 100-240V ~ 50/60HZ
16	Charger output voltage	DC 42V 2A
17	Duration of Charging	About 4h
18	Packing size L×W×H	1120180505mm
19	Gross weight after packaging	About 18 kg

Part Seven: Warranty Policy

1: Warranty Content

Type	Warranty content	Starting time
Main body of scooter	Baseboard, hub motor, front tube, handlebar, driven hub, brake system, folding stem, front fork, cables	12 months
Additions	Battery, charger, thumb power throttle, brake lever, front light, tail light, ambient light, LED dashboard	6 months
Quick-wear parts	Grip, inner and outer tires, mudguard, decorative cover, foot pad, charging port	3 months

2: Non-Warranty Regulations

Unauthorized maintenance, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, incorrect use of accessories other than this product, or tearing, altering, or anti-counterfeiting labels.
The validity period of warranty has expired.
Damage caused by force majeure.
Conditions that do not meet the performance failures listed in the following "Electric Scooter Performance Failure Table".
Failure to use, maintain, and adjust as required in the "User Manual" results in performance failures listed in the "Electric Scooter Performance Failure Table" for the scooter and its accessories.
Damage caused by man-made reasons (including but not limited to scooter fluid, punctured tires, impact, marks, and damage caused by normal use of exterior parts, etc.).
Failure and damage caused by abnormal use of this product (including but not limited to overload, riding down from steps, falling, extreme sports, etc.).
If this product is used for commercial purposes, it will not be guaranteed.

3: Electric Scooter Performance Failure Table

Name	Performance fault
Electric Scooter	The motor cannot work under normal use The controller fails under normal use Charger failure under normal use Battery failure under normal use

Declaration

The electric scooter is a sport and entertainment tool, not a transportation vehicle. However, when driven in a public area, it also has the property of a transportation vehicle, and users need to master riding skills. The manufacturer shall not be liable for any casualties or losses caused by drivers' inexperience or failure to follow the instructions in this user manual.
Please respect the pedestrian's rights of way when driving. To avoid frightening pedestrians, remind pedestrians and slow down when passing behind them. Stay alert during driving, drive at low and medium speeds on unconventional complex roads such as potholes and smooth surfaces, and maintain a reasonable and safe distance from others and vehicles.
When driving in countries and regions where there are no relevant national standards and regulations for electric scooters, users must strictly abide by the safety requirements of this manual. The manufacturer will not bear any direct and joint liabilities for all financial, personal losses, accidents, legal disputes, and all other unfavorable events that cause conflicts of interest caused by use behaviors that violate the instructions in this manual.
Please do not lend the electric scooter to people who cannot operate it. When lending to a friend, teach them the basic operation. They must wear safety protective gear before using it.
Please perform a basic inspection of the electric scooter before each driving. If any abnormalities are found, such as obvious loose parts, significantly reduced battery life, slow tire leaks or excessive wear, abnormal steering noise, or malfunction, stop using it immediately and cut it off. Do not drive forcibly. Contact the after-sales service for professional guidance or repair and maintenance services.
Do not use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean the electric scooter. It is forbidden to use a pressure gun to spray and wash, as this may cause electric shock or serious failure due to internal water.
Do not use other types or brands of battery packs. Do not touch the battery contacts, and do not disassemble or puncture the shell. Avoid metal objects contacting the battery contacts, which could cause short circuits. Otherwise, it may result in battery damage or personal injury. Only use the original charger to charge; otherwise, there is a danger of damage or fire.
Do not place the electric scooter or its battery pack in a car exposed to the sun in summer, and do not put the battery pack into a fire. This may cause the battery to fail, overheat, and even cause a risk of fire. When not using the scooter for more than 30 days, fully charge it first, store it in a cool and dry place, and fully charge it every 60 days. Otherwise, the battery may be damaged, and this damage is not covered by the warranty.
Only use parts and accessories approved by the manufacturer. Please do not modify your electric scooter without authorization. Damage to the electric scooter caused by unauthorized modification is not covered by the warranty. The manufacturer will not bear any responsibility for property losses, personal injuries, accidents, etc., caused by unauthorized modification.