Rossetta Galaxy Projector

Introduction

Thank you for purchasing the Rossetta Star Projector. This product is a unique indoor light projector that uses star light and holographic technology to project thousands of moving pin-points of light against a transforming ambient light. It can be used to create a romantic starlit dinner or enhance your home entertainment experience.

Each unit provides up to 25 x 25 ft of coverage. It has a maximum electrical usage of less than 10 Watts and operates in temperatures between -4°F to 113°F (-20°C to 45°C).

Before You Begin

Upon receiving the star projector, carefully unpack and check the carton contents to ensure all parts are present and in good condition. Notify the retailer immediately if any parts appear damaged from shipping. Retain packing material for inspection. Save the carton and all packing materials, as the projector must be returned in the original factory box if necessary.

Packing List:

• Galaxy Projector
• USB-C Power Cord
• Remote Control
• User Manual

The included USB-C cable may vary from the picture shown.

Setting Up the Star Projector

1. Remove the protective film from the LED bulb.
2. Place the Rossetta Star Projector on a flat, solid surface, aiming at the ceiling/wall for projection.
3. Use the included USB C cable to connect the projector to a USB power adapter (5V/2A recommended, not included).
4. The projector will turn on automatically upon connection to power. The ambient lights and stars will gradually illuminate and begin moving by default.
5. To turn off the projector, press the power button on the remote and unplug from the power outlet.
6. Use the following buttons to control lighting effects or night lights:

• Power button: Power on/off
• SINGLE: Control ambient lighting colors
• MODE: Cycle through Ambient lights & stars, Ambient lights only, Stars only
• Night Light Button: Change the night light colors

Notice

• The star color is green and cannot be changed.
• The remote works within a 30ft range. Point the remote control directly to the projector, away from the TV.
• The projector must be plugged in to work; it does not have a built-in battery and cannot charge.
• The projector will automatically turn off after 8 hours to prevent bulb overheating.
• Use the included USB C power cable to connect the projector for proper operation.

Product Features

• Nebula Lighting Effects: Switch between 4 single or 10 mixed color lighting effects using the remote.
• Built-in Bluetooth 5.2 Speaker: Connect your smartphone (iPhone, Samsung, Fire Tablet, etc.) via Bluetooth to play music.
• Sound Activated Mode: Press the "Mic" button to activate sound-activated mode, where the projection light flashes according to the external sound or music rhythm.
• Night Light Mode: Control the ring night light using the remote control or device buttons.
• 10 White Noise Sounds: Features 10 built-in soothing sounds to help relieve stress or promote sleep.

Remote Control Function Description

• 1. NEBULA: Ambient Lights Switch (on/off)
• 2. STAR: Laser Switch (on/off)
• 3. R: Red light on/off
• 4. G: Green light on/off
• 5. B: Blue light on/off
• 6. W: White light on/off
• 7. Volume +: Volume up
• 8. Volume -: Volume down
• 9. Previous Song: Previous track
• 10. Next Song: Next track
• 11. Bluetooth/Music Switch: Control Bluetooth or White Noise on/off
• 12. MIX: Manually control mixed color ambient lights (RGB, RGW, BGW, RBW, RG, RB, RW, BW, BG, GW)
• 13. MODE: Ambient Light Breathing Mode (single-color cycling, two-color mixed-color cycling, three-color mixed-color cycling)
• 14. Mic: Sound Activated Switch (lights flash to sound/music rhythm)
• 15. SPEED: Ambient Lights Brightness +/-
• 16. 1H: Set 1-hour timer (short press); turn off timer (press again)
• 17. 2H: Set 2-hour timer (short press); turn off timer (press again)
• 18. Color Wheel: Switch the color of the ring night light
• 19. ON/OFF: Power Switch (on/off)

Notice: Please point the remote control directly to the projector, away from the TV.

Default Settings

Once the star projector is plugged in, it will enter the default mode with all effects on. Use the remote control to adjust effect settings and brightness.

Installation Tips

• Do not connect the light to a dimmer pack, as it may damage the star component.
• The darker the display area, the brighter your projection will appear.

Product Specifications

Designed in the USA by Rossetta LLC, Broward, Pompano Beach, FL 33068. Made in China.

Rossetta Limited Warranty

This product carries a 1-year limited warranty against defects in workmanship and materials. Rossetta LLC agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. For detailed warranty information for your country, please visit https://rossettalight.com/pages/warranty-registry.

Caution

This is not a toy. Young children under 3 years must be supervised while using this device at all times. This unit is not waterproof. Use and store indoors or in a dry place.

Cleaning Instructions

Surface clean only with a soft, dry cloth. Unplug unit before cleaning.

Disposal

At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Warning Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Rossetta Customers Support

Experiencing issues or have questions about your new purchase? Reach out to us at support@rossettalight.com. Our committed support team will respond within 24 hours.

Activate your 36-month warranty with ease by registering your product on our website at: www.rossettalight.com.

Alternatively, you can scan the QR code below to register your purchase.

GET SOCIAL WITH US

WWW.ROSSETTALIGHT.COM

Instagram Icon Facebook Icon Email Icon @rossettalights | support@rossettalight.com

Customer Support

Monday-Friday 9:00 AM–5:00 PM PST

*Please have your invoice and order number ready before contacting Customer Support.