Capture Pro Software support, drivers and manuals | Kodak AlarisCapture Pro Software support, drivers and manuals | Kodak Alaris
Capture Pro Software support, drivers and manuals | Kodak Alaris
User Guide for Kodak alaris models including: S2040, S2060w, S2070, S3140 Max, S3120, S3060, E1030, S2040 Capture Pro Software, Capture Pro Software, Software
S2040 Scanner support, drivers and manuals | Kodak Alaris
File Info : application/pdf, 8 Pages, 249.40KB
DocumentDocumentCapture Pro Software and Capture Pro Limited Edition Version 6.1 Release Notes Table of Contents · Upgrading to Version 6.1 · Operating System Support Changes · Scanner Support Changes · New Features and Improvements · Additional configuration options for Searchable PDF Output Public Upgrading to Version 6.1.0 Upgrading Stand-Alone Installations · The customer's Capture Pro Software Serial Number must be entitled to the 6.1 release The Entitlement Date (or Software Assurance Expiration Date) must be May 1, 2023 or later · To upgrade, download the installer (CapProSW_6_1_0.exe) file from www.alarisworld.com/go/captureprodownload and run it. The installer will automatically upgrade an existing Capture Pro install to Version 6.1.0 When upgrading from Version 6.0 or earlier, an Internet connection is required during the upgrade as the KODAK Alaris licensing system will generate a new 6.1 license o If an Internet connection is not available or allowed, the installation wizard will guide you through the off-line process of obtaining (and installing) a license from a PC that does have Internet access Public Upgrading to Version 6.1.0 (continued) Upgrading Network Edition Installations · Both the NE Server and the NE Client workstations must be upgraded to Version 6.1 at the same time. You cannot run a Version 6.0 client workstation with a Version 6.1 NE Server You cannot run a Version 6.1 client workstation with a Version 6.0 NE Server · To upgrade, download the installer files from www.alarisworld.com/go/capturepronedownload and run them IIS on the Network Edition Server must be STOPPED prior to the upgrade and RESTARTED after the upgrade Public Upgrading to Version 6.1.0 (continued) Q: Can a Subscription customer upgrade to Version 6.1? A: Yes. Subscription customers are entitled to new releases that come out during their Subscription timeframe. · Prior to upgrading to Version 6.1, the Subscription customer should contact Service and Support with their Hardware ID and their intention to upgrade. · A new Version 6.1 Subscription license, with the same Group level and Expiration Date, will be created for the customer's Hardware ID. · Service and Support will then contact the customer indicating that their Version 6.1 subscription license is ready, and that the customer can now upgrade to Version 6.1. Public Operating System Support Changes Dropped Support · Windows 8 and 8.1 Full list of supported operating systems and virtualized environments is on the Capture Pro Support web page: https://support.alarisworld.com/capture-pro-software#section%201 Public Scanner Support Changes Kodak Scanner Support Additions Kodak E1030 Kodak E1040 Group A Group A Public New Features Additional Configuration Options for Searchable PDF Output · These new PDF Export Options only have an impact when the Compatibility is configured for PDF/A-1, PDF/A-2, or PDF/A-3. · For PDF-MRC output, it is recommended to choose either Balanced or MaxQuality for the best results · These new options should improve overall PDF output quality and reliability compared to the previous release of Capture Pro Software Public