Creative Pen Displays & Tablets for Drawing - Huion
store.huion.com/
Support : HUIONTroubleshooting : HUIONHow to fix no pen pressure or not clicking or drawingWindows : HUIONCreative Pen Displays & Tablets for Drawing - Huionhuion.com/download
Instruction Manual for HUION models including: GS1333, GS1333 Kamvas 13 Gen 3 Drawing Tablet, GS1333, Kamvas 13 Gen 3 Drawing Tablet, 13 Gen 3 Drawing Tablet, Gen 3 Drawing Tablet, 3 Drawing Tablet, Drawing Tablet, Tablet
Huion Kamvas 13 Gen3, Sakura Pink (GS1333-SP) | Porównanie cen Cenowarka Polska
File Info : application/pdf, 56 Pages, 2.39MB
DocumentDocumentKamvas 13 (Gen 3)
GS1333
Thanks for choosing the HUION Kamvas series pen displays. Kamvas 13 (Gen 3) is a new generation of creative drawing pen displays with dual side-mounted dial controllers for designers. Boasting high performance and versatility, Kamvas 13 (Gen 3) provides an unparalleled drawing and creation experience for its users. To ensure that you fully understand and efficiently use this product, we strongly recommend that you read this user manual carefully.
Note: The pictures in the manual are for reference only and are intended to assist you in understanding the design and function of the product. A change in design or specification may occur without notice.
1 / 56
www.huion.com
1. Accessories
After unpacking, make sure you receive the following items: Kamvas 13 (Gen 3) Pen Display * 1
GS1333
3-in-1 Cable (1.8m) * 1
USB-A Extension Cable (1.2m) * 1 PW600L Digital Pen * 1 PH06 Pen Holder * 1 PN06 Pen Nib * 10 (Included in the pen holder) ST300 Stand * 1 (Optional) Cleaning Cloth * 1 Glove * 1 Quick Start Guide * 1
2 / 56
www.huion.com
2. Connection
GS1333
The pen display can be connected to computers and Android devices. Please refer to the following connection methods.
2.1. Connect via a 3-in-1 Cable
1. Connect the USB-C cable of the 3-in-1 cable to the first USB-C port on the side of the pen display. 2. Connect the USB-A cable, HDMI cable, and USB-A power cable on the other end of the 3-in-1 cable to the corresponding ports on your computer.
2.2. Connect via a Full-featured USB-C Cable
1. Plug one end of the full-featured USB-C cable(1) into the second USB-C port on the side of the pen display (as shown in the picture below) and the other end into the USB-C port that supports graphic output on your computer/tablet/mobile phone. 2. If the screen does not light up, or the screen flicker or black screen issues occur, please plug one end of the USB-C power cable(2) into the first USB-C port on the side of the pen display and the other end into a power adapter, and connect the
3 / 56
www.huion.com
GS1333 power adapter to a power source to provide the necessary additional power support to achieve a stable connection.
2
1
Tip: Full-featured USB-C cable and power cable need to be purchased separately (available at
HUION Store). The interface of the connected device (computer/mobile phone/tablet) should support the
USB 3.1 GEN1 data transfer protocol and DP 1.2 and later, and the power supply specification should be at least 5V/2A. If your computer or Android device (mobile phone/tablet) is low on power, an additional power supply is required to ensure that it has enough power before you proceed to step 2.
3. Stand Installation and Usage
To enhance the user experience, an ergonomically adjustable stand is optional. You can adjust the stand between 20° and 50° (6 adjustable angles) to get a more comfortable experience.
4 / 56
www.huion.com
4. Functions Overview
GS1333
No.
Item
Instruction
Short press: To turn on/off the pen display.
Press and hold for 3s when it's on: To bring up the
pen-enabled OSD menu.
Power Button +
White light: Under normal working conditions.
Indicator Light
Red light: In sleep mode/no video input signal.
No light: Not connected to the power
supply/turned off.
: Function-switch 1. In Radial mode(the driver is not installed or started),
Button A + Dial you can only assign the same function to and .
Controller A
Press and hold the function-switch button for 3s to
: Function-switch bring up the Radial menu, rotate the dial controller to
Button B + Dial select among several functions, and then press the
5 / 56
www.huion.com
GS1333
Controller B
function-switch button to confirm.
2. In Customize mode(the driver is installed and started),
you can assign different functions to and
respectively. Press the function-switch button to bring
up the function menu or to switch between several
functions while the selected function is automatically
confirmed.
When the driver is not installed or started, the press keys
will perform the default functions. Once the driver is
Press Key
installed and started, you can customize the press key
functions in the driver according to your personal
preferences.
Please follow the instructions about how to connect via
USB-C Port
a 3-in-1 cable provided on the page to properly connect
the pen display to your computer via this port.
Please follow the instructions about how to connect via
Full-functioned a full-featured USB-C cable provided on the page to
Type-C Port
properly connect the pen display to your computer via
this port. This port supports graphic input.
6 / 56
www.huion.com
5. Driver Installation
GS1333
5.1. Windows
Note: Before installing the driver, please close all graphic software and antivirus programs. The note ("HuionTabletCore.exe" failed to launch!) below appears only on devices with Windows OS, indicating that the driver is blocked by antivirus programs or drawing applications.
Please make sure your computer operating system is Windows 10 or later. If the connection fails, please restart the driver or your computer. If you uninstall the driver, the pen display may experience no pressure sensitivity or other unknown issues in certain applications. In this case please reinstall the driver and your pen display will return to its default settings.
7 / 56
www.huion.com
Driver Installation Instruction: 1. Connect the pen display to your computer. 2. Click Driver-Kamvas 13 to get the latest driver for your device. 3. Double-click the driver and click "OK" to proceed.
GS1333
4. Check the box to agree with the User Agreement and click "Install Now".
5. After the installation has been completed, click on "Try it now".
8 / 56
www.huion.com
GS1333
6. A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate a successful connection. Now you can use your pen display.
9 / 56
www.huion.com
GS1333
5.2. mac
Note: Please make sure your computer operating system is macOS 10.12 or later. If the connection fails, please restart the driver or your computer. For more information, please refer to Troubleshooting. See section. If you uninstall the driver, the pen display may experience no pressure sensitivity or other unknown issues in certain applications. In this case please reinstall the driver and your pen display will return to its default settings.
Driver Installation Instruction:
1. Connect the pen display to your computer.
2. Click Driver-Kamvas 13 to get the latest driver for your device.
3. Unzip the driver file and drag the "HuionTablet" icon into the "Applications"
folder.
4. Open the folder and then find and double-click the HuionTablet driver application.
10 / 56
www.huion.com
GS1333
5. Connect the pen display to your Mac, and click "Open System Preferences" when prompted. Go to Security & Privacy > Privacy > Accessibility settings and click the lock icon to unlock the settings. Tick the checkbox on the left of the HuionTablet driver application to enable accessibility. Then click the lock icon to lock the settings.
11 / 56
www.huion.com
GS1333 6. A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate
that the pen display is successfully connected to your computer. Now you can use your pen display.
12 / 56
www.huion.com
GS1333
5.3. LinuxUbuntu
Note: 1 Please remember to close the command window and reboot your Linux device after installing the driver, or the driver will not be useful. After rebooting the device, you can access the system main menu to find the Huion Tablet driver and then open it to finish some settings. 2 If you are running Linux operating system on VMware, you must use the VMware Workstation Pro version. And the Play version of VMware Workstation doesn't support the Huion Tablet driver. 3 Some versions of the Ubutun operating system don't support using more than one monitor simultaneously. And we recommend you upgrade your system to 20.04LTS or later if you want to use a Huion painting device on multiple display screens simultaneously smoothly.
Huion Tablet Driver installation packages in 2 different formats are available for Linux devices:
· tar.xz (file format) · deb (file format) Here are the step-by-step instructions for installing the driver packages in different file formats respectively:
5.3.1. Instructions for installing the driver package file in tar.xz format.
Linux operating systems supported:Ubuntu
5.3.1.1. Steps to Install: 1.Extract the contents of the driver file, huiontablet_XXXX.tar.xz, into a folder. 2.Open the command window in the folder.
13 / 56
www.huion.com
GS1333
3.Input the following command:"sudo sh install.sh", and press the enter key on the keyboard to make your Linux device execute it.
4.Enter the user password to complete the installation.
14 / 56
www.huion.com
GS1333
5.Please reboot your Linux device to run the driver, or the driver will not be useful.
6.A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate that the pen display is successfully connected to your computer. Now you can use your pen display.
15 / 56
www.huion.com
GS1333
16 / 56
www.huion.com
5.3.1.2. Steps to Uninstall: 1.Open the command window in the folder of the driver.
GS1333
2.Input the following command in the command window: "sudo sh uninstall.sh", and press the enter key on the keyboard to make your Linux device execute it.
3.Enter the user password to complete the uninstallation.
17 / 56
www.huion.com
GS1333
5.3.2. Instructions for installing the driver package file in deb format.
Linux operating systems supported:Ubuntu
5.3.2.1. Steps to Install: 1.Open the folder and double-click the driver file in deb format to enter the system default interface of installing the driver on the application store, then click to install.
2.Enter the user password to complete the installation.
18 / 56
www.huion.com
GS1333
3.Please reboot your Linux device to run the driver, or the driver will not be useful.
19 / 56
www.huion.com
GS1333
Tips: Please ensure that your Linux device has been connected to the internet when installing the driver, or the installation will fail when entering the application store interface.
4.A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate that the pen display is successfully connected to your computer. Now you can use your pen display.
20 / 56
www.huion.com
GS1333 5.3.2.2. Steps to Uninstall: 1.Enter the interface of the installed applications on the system ' s built-in application store. 2.Find the driver and click to uninstall it.
Tips: If you can't access the system's built-in application store, you can search out the driver file, huiontablet_xxx.deb, then double-click it to enter the installation interface, and click the remove button to uninstall it.
21 / 56
www.huion.com
GS1333
6. How to Use the Digital Pen
The digital pen enables a seamless user-device interaction, allowing users to draw, write, move objects, and use customizable pen button functions. Hold the Pen: Hold the digital pen as you hold a real pen. Adjust your grip so that you can toggle the pen press keys easily with your thumb or index finger. Be careful not to accidentally press the key while drawing with the pen.
Note: Please do not put the digital pen on the pen display when not in use. Otherwise, it may cause interference that may prevent the mouse from operating properly or the computer from entering sleep mode.
Cursor Movement: Move the pen slightly above the working area of the pen display without touching the surface of the pen display, and the cursor on the screen will move to the new position accordingly. Click: Tap on the working area of the pen display with the pen tip to register a click to select or highlight contents on the screen; long press and drag the pen tip to move the selected item; double-click to open the selected item. Move: Select an icon or file with the pen tip, then slide the pen tip across the screen to move it to the target location. Use the Pen Buttons: The digital pen supports customizable pen button functions and users can program
22 / 56
www.huion.com
GS1333 the functions in the driver. The pen buttons will work as long as the vertical distance between the pen tip and the pen display screen is within the sensing height (10mm). If you want to disable pen button functions, you can set pen buttons to no function in the driver.
Replace the Pen Nib: When the nib of the digital pen is badly worn, please replace it with a new pen nib in time. Follow the steps below to replace the pen nib: 1. Open the pen holder and take out a replacement nib. 2. Tilt the pen and pull out the worn nib through the built-in nib clip on the back of the pen holder. 3. Insert a replacement nib straight into the barrel of the pen until the nib stops moving forward.
23 / 56
www.huion.com
7. Driver Setting and Functions
7.1. Driver Interface Overview
GS1333
1 Pen Display On the "Pen Display" interface, Users can set functions of the display, including Press Key and Working Area Set. See Section 2 Digital Pen Users can set functions of the pen on this "Digital Pen" interface, including Press Key, Mode selection, Pressure Sensitivity Adjustment, and Pressure Test. See Section 3 Store Huion Store is where you can get the latest information about the product such as its FAQ or sales promotion. In addition, you can also purchase Huion ' s other products or accessories here.
24 / 56
www.huion.com
GS1333
4 Add Programs
1) Some programs which have already been opened will appear for you to choose
from after clicking Add a Program on the screen. For more programs, you need
to open them and then enter this interface to add, or click Browser, select the
program on your computer, and click Open to get it added.
2) For different programs, you can make different settings for the working area and
the digital pen. Then when you launch another program, the Driver will
automatically recognize it and the setting features will change to its
corresponding ones.
3) When you select All programs, settings for the working area and the functions of
the digital pen are valid for every program that is not customized.
5 Setting
Users can set the functions of a driver on this interface, including check out Device
information, Backup setting, General setting, and its version. See Section
6 Common Problems
Click
"?"
and jump to Forum in our
website https://support.huion.com/en/support/home to get a user manual or feed
back the problems to us.
7 Switch between Devices
The Driver is able to support two devices at most. Functions of them can be
customized by users respectively. When switch to one of them, functions change to
its corresponding ones.
25 / 56
www.huion.com
7.2. Pen Display Setting
GS1333
7.2.1. Press Key
You can customize the functions of these press keys according to your own habits, and you can uncheck "Enable press keys" in the lower left corner to turn off these functions. Place the cursor over one of the buttons on the screen of your computer to check its default value. Click a button and then a pop-up dialog box appears. Choose what you want and set its function.
Refer to this table of settings below to help you decide if you want to change the
existing settings.
Note: The performance of functions in the table below is up to the device that you have connected. And this table is subject to change without notice.
The settings of the press keys' functions can be found in the following list.
The functions of the press keys can be set as:
26 / 56
www.huion.com
GS1333
Keyboard Key Mouse Key Tool Run Program
System Application
Multimedia
Precision Mode
Pan/Scroll Quick Menu Fixed Pressure Sensitivity None
Click on the input box and enter a valid key combination to create a shortcut (support up to 18 characters). Select the functions of a Mouse or Wheel. Please see the picture below for detailed information of these functions. Mouse: Left Button, Right Button, Middle Button, and Double-left Click. Wheel: Wheel Forward and Wheel Backward. Other functions: Ctrl, Alt, Shift, and Win . Select Switch Screen, Eraser, Recover, Revoke, or Clear. Click Browse and select the program that you want to run quickly. After that, press the key to launch the item. For the Windows OS, the key functions can be set as: Lock the Screen, Sleep, Power Off, Show/Hide Desktop Icon, Task View, Start Menu, and Calculator. For the macOS, the key functions can be set as: Sleep, Lock the Screen, Show/Hide Desktop, Mission Control, Launch Pad, and Finder Search. For the Linux OS, the key functions can be set as: Lock the Screen, Sleep, and Power Off. You can apply these functions to press keys: Previous Song, Next Song, Play/Pause,Volume up, Volume down, and Muted. You can toggle between the normal precision and precision that you choose, from Fine(level 1) to Ultra Fine(level 5). When you select Precision Mode, the Precision Mode window appears
and you can move the slider to set the precision you want to toggle into. For example, if you assign Precision Mode to a pen button, when you
press the pen button, you switch to working in the precision that you selected using the slider. When you press the pen button again, you switch back to working in the normal precision. Press "Esc" or press the pen button for the third time to exit Precision Mode. This function allows you to pan and scroll in a document or item by moving the pen tip up and down or right and left.When you select Pan/Scroll, the Scroll Speed window appears. Move the slider to your preferred scrolling speed. Pick it up and you can use the key to pull up the Quick Menu. Detailed information for reference is down below this table. You can lock the pressure at the current level until you release the component. For example, if you assign this setting to a pen button, you can paint with pressure sensitivity enabled in your application until you reach the brush size you like. Then, press and hold the pen button to lock in that brush size as long as you are pressing and holding the button. When None is selected, the key will not perform any function when pressed.
Note: The pictures are for reference only. 27 / 56
www.huion.com
The specific settings of the Quick Menu are as follows:
GS1333
Click Customize in the picture above to call out a quick menu (see picture 1). For each of the six buttons on the left, users can enter a name for it and set unique function for it. After that, users can call up the Quick Menu by pressing the key (see picture 2). The menu disappears after a click on any of the six buttons. By clicking "Fix" once the menu will be fixed on the desktop while after a second try the "Fix" button changes to"Close"and the menu disappears (see picture 3). Put the cursor on the menu to drag it.
28 / 56
Picture1
www.huion.com
GS1333
Picture2
Picture3
7.2.2. Working Area Setting
Select the Working Area tab to adjust the ratio of the distance of pen movement on
the pen display to that of the corresponding cursor movement on the monitor. By
default, the entire active area of the pen display maps to the whole monitor.
If more than one monitor is in use and they are in extended mode, users need to
choose one that will be mapped to on the driver interface and the other one as the
external display.
In mirror mode (All monitors display the same content), the pen display maps to
the entire screen on each monitor and cursors displayed on them move
simultaneously.
Define the pen display area that will be mapped to the monitor. Three modes on
the driver can be chosen:
29 / 56
www.huion.com
GS1333
[1] Full Area:
The entire active area of the pen display will be mapped to the monitor. It is the
default setting.
[2] Screen Ratio:
The ratio of the active pen display area is the same as that of the monitor, which as
a general rule, is 16:9. For example, if you choose the screen ratio and draw a circle
on the pen display, then a circle appears on the monitor that has been connected to
the pen display, in this case some parts of the pen display may not work. But if you
don't choose the screen ratio and draw a circle, then the circle may change into an
oval on the monitor.
The ratio of the active pen display area depends on that of the display device, which
as a general rule. In Screen Ratio mode, these two ratios keep the same.
[3] Custom Area:
30 / 56
www.huion.com
GS1333 1) Enter coordinate values. 2) Users can adjust the working area of the pen display by changing the outlines
of the smaller rectangle. Users can also drag the two blue rectangles to select the active areas of the digital pen on the screen and the pen tablet. (see picture 1 and 2).
Picture 1
31 / 56
www.huion.com
GS1333
Picture 2
7.2.3. Rotate Working Area
Change the direction of the pen display to adapt to the left- and right-handed operation. You can rotate the pen display by 0°, 90°, 180° or 270°.
32 / 56
www.huion.com
GS1333
Picture1
33 / 56
Picture2
www.huion.com
7.2.4. Calibrate Your Pen Display
GS1333
Click Monitor Calibration tab and follow the instructions to calibrate your pen display.
Please use the digital pen to click on the center red dot of the cross in a common pen-holding posture. You can cancel Calibration and restore default.
34 / 56
www.huion.com
GS1333
7.3. Digital Pen Setting
7.3.1. Press Key
You can use this digital pen to interact with your device, including drawing, writing, moving files, or activating the functions of pen press keys. The setting of the pen press keys is the same as the Press Key setting of the display. Please refer to it.See Section
35 / 56
www.huion.com
GS1333
7.3.2. Pen Nib Activity
The pen nib of the digital pen can be set as Valid/Invalid in the driver according to users' needs. Click the drop-down button to set its activity. In Valid mode, the pen can complete specified actions such as clicking, double-clicking, and dragging when you tap the pen on the screen. In Invalid mode, the pen can control the movement of the cursor, but cannot complete specified actions.
36 / 56
www.huion.com
GS1333
7.3.3. Enable Windows ink
Microsoft Windows provides extensive support for pen input. When the "Enable Windows Ink" option is ticked, pen features are supported in software such as Microsoft Office, Windows Whiteboard, Adobe Photoshop CC, SketchBook 6, etc.
Note: macOS and Linux OS do not support this feature.
37 / 56
www.huion.com
GS1333
7.3.4. Pressure Sensitivity Adjustment
Users can adjust the pressure sensitivity level by dragging the slider in the Pressure Sensitivity Adjustment box according to your usage habits. Users can also check the five options from soft to hard on the right of the box to find the proper pressure sensitivity for themselves. Click the redo button at the top right to revert to the default pressure. To decide the force required for a pen to produce a click or a pressure sensation. You can change the slope of the pressure response curve. Draw lines in the Pressure Test box with the pen, and the bar on the right will
simultaneously show the pressure changes on the pen nib. Click the "Delete" button above to remove the lines, reset the pressure sensitivity level and test it until you find the appropriate pressure sensitivity level.
38 / 56
www.huion.com
A steep curve means a more sensitive response.
GS1333
39 / 56
www.huion.com
7.4. Driver Setting
GS1333
7.4.1. Device
You can view the information of the firmware and the connected product here.
* Display Settings Scene Mode: "Standard Mode", "Game Mode", "Movie Mode" and "USER" can be selected. When selecting "Standard Mode", "Game Mode", or "Movie Mode", you can adjust the "Saturation" value by dragging the blue slider. When selecting "USER" mode, you can adjust the "Brightness" value, "Contrast Ratio" value, and "Saturation" value by dragging the blue slider. Brightness: You can drag the corresponding slider to adjust the brightness of the screen.
40 / 56
www.huion.com
GS1333
Contrast Ratio: You can drag the corresponding slider to adjust the contrast ratio of the screen. Saturation: You can drag the corresponding slider to adjust the saturation of the screen. Color Temperature: "6500K", "7500K", "9300K", or "USER" mode can be selected. In "USER" mode, color temperature can be customized by adjusting RGB values. Color Space: "Native", "sRGB", "Rec. 709", or "Adobe RGB" can be selected. In Native color space, "Scene Mode" and "Color Temperature" can be freely adjusted or selected. While in sRGB, Adobe RGB, and DCI-P3 color spaces, to ensure that the standards of the three color spaces can be met as far as possible, only "Brightness" in "USER" mode can be adjusted.
Note: For macOS users, Display Settings is available only when the full-featured USB-C cable is used for the connection. If you want to change the display settings, please use the full-featured USB-C cable to connect your device, or make adjustments by long pressing the power button for 3s to bring up the pen-enabled OSD menu.
41 / 56
www.huion.com
GS1333
7.4.2. Backup
The backup contains all the settings data of the device. You can restore these settings at any time, locally or on another computer. Importing and exporting configuration settings is supported, which helps to avoid repeated settings when you use different devices. Export settings: Click Export to export the current settings data locally. Import settings: Click Import, open file manager, select the configuration file, and then open it.
42 / 56
www.huion.com
GS1333 Default Setting: All the settings on the current device are covered and the default settings are restored.
43 / 56
www.huion.com
7.4.3. General Setting
GS1333
Language: Click the drop-down button to switch between 14 languages. Color: You can select the color of the Driver interface among Dark, Blue, and Light according to your preference. Start Menu: Click to select boot options. Click to enable "New Message Alert", "Auto-Start", and "Automatic Updates", which helps improve our products and services, and makes it easier for you to experience the latest driver in a timely manner. They can also be disabled anytime. Hotkey: You can set a hotkey to call out the Driver interface quickly according to your usage habits. When you want to restore the press key for opening the driver page by default, click "Reset to Default". Switch Screen: Set a hotkey to switch between the monitors to which the current pen tablet/pen display maps. The Switch Screen hotkey works only for the current device supported by the HuionTablet driver application. Administrator privilege: This item is only available for Windows OS. The driver will identify whether or not the current driver interface is opened with administrator privilege. If it is opened with administrator privilege, this item will not be displayed. If it is not opened with administrator privilege, this item will be displayed.
44 / 56
www.huion.com
GS1333
7.4.4. About
Users can check the Driver version here. Click "Check for Updates" to find the latest Driver version and then follow the prompts to update the Driver if needed; Click "Feedback" to send a feedback email if you have any question about the driver; Click "Uninstall" to delete the current driver. If you can't click or draw or there is no pressure sensitivity under the software, click "Software Diagnosis" to find out
45 / 56
www.huion.com
cause.For specific operation,Please click here.
GS1333
7.5. Dial Setting
You can set the dial controller to a customize mode or use it to work with Windows Radial menu.
7.5.1. Customize Mode
In Customize mode, dual dial controllers can be programmed respectively to perform different functions in the driver. Steps: 1. Open the driver, click "Dial Setting" and choose Dial1/Dial2 to set its function.
46 / 56
www.huion.com
GS1333
2. In the menu bar that pops up, set any functions for the selected dial controller.
Dial Functions:
Default
The default three functions of a dial controller are "Zoom
47 / 56
www.huion.com
GS1333
in/out", "Adjust Brush Size", and "Scroll Up/Down".
Click on the input box (Clockwise and Anticlockwise) and enter
Keyboard
valid key combinations to create shortcuts. After that, you can
rotate the dial controller to implement the settings.
Mouse
You can customize the dial controller to function as a mouse wheel, which can be used in combination with modifier keys.
You can turn the dial controller to play the previous song/frame
Multimedia or next song/frame. You can also rotate it to turn the volume up
and down.
In Photoshop, you can set the dial controller to adjust selected
Photoshop parameters, brush size, brush flow, and brush opacity. You can
also use it to switch layers and rotate canvas.
Lightroom
In Lightroom, you can set the dial controller to adjust selected sliders.
In Premiere, you can set the dial controller to go to
Premiere
previous/next frame, adjust selected sliders, and zoom in/out
timeline.
Clip Studio Paint
In Clip Studio Paint, you can set the dial controller to zoom in/out or rotate canvas.
TVPaint
In TVPaint Animation, you can set the dial controller to go to
Animation
previous/next frame, adjust selected parameters, and switch
layers.
48 / 56
www.huion.com
GS1333
After "No function" is selected, the corresponding press key
No function
becomes inactive and no command will be triggered when it is pressed. This setting is helpful for disabling press keys that you
are not used to.
Note: When you customize the dial controller to "Mouse", "Multimedia", "Photoshop", "Lightroom", "Premiere", "Clip Studio Paint", and "TVPaint Animation", you can select "Reverse" to reverse the functions of the Dial/Touch key in different directions.
49 / 56
www.huion.com
7.5.2. Radial Mode
GS1333
Radial mode can only be implemented on Windows operating systems with no drivers installed or enabled. In Radial mode, functional configurations of the dual dial controllers are the same. Steps: 1. Ensure the driver is not installed or started. 2. Go to Windows Settings > Devices > Wheel.
3. Choose the default tools for the Radial menu or customize the tools. 4. Turn the dial controller clockwise or anti-clockwise to use it.
Tip: On a computer running Windows 10 or later, the dial controller in Radial mode
can be used within Photoshop to adjust size, opacity, flow, smoothing and control
of all brush-like tools.
Press and hold the function-switch button for about 3s to bring up the Radial
50 / 56
www.huion.com
menu, and then select the brush icon by rotating the dial controller.
GS1333
Brush
Press the function-switch button to confirm the selected brush function. Brush
When the "Brush Settings" panel appears as shown below, you can rotate the dial controller to select following functions (size, opacity, flow, smoothing and control). After choosing the corresponding function, press the function-switch button, and then rotate the dial controller left and right to adjust the parameter.
Size
51 / 56
www.huion.com
8. Pen-enabled OSD Menu
GS1333
OSD menu settings on Kamvas 13 can be done with the digital pen. Long press the power button for 3s to bring up the OSD menu, and then use the digital pen to adjust the settings on the screen. The user interface is designed in a minimalist way. Four interfaces including the Scene Mode adjustment interface, Color Temperature adjustment interface, Color Space adjustment interface, and General Settings interface are reserved to meet users' needs.
8.1. Scene Mode
Click the sun icon to adjust the brightness. On the upper left of the interface, there are four modes to be chosen: "Standard Mode", "Game Mode", "Movie Mode" and "USER" mode. On the upper right are "Brightness", "Contrast", and "Saturation". When "Standard Mode", "Game Mode", or "Movie Mode" is chosen, only the third bar will be blue and users can drag it to adjust the saturation.
When "USER" mode is chosen, all three bars will be blue and users can adjust the
brightness, contrast, and saturation by dragging them.
52 / 56
www.huion.com
GS1333
8.2. Color Temperature Settings
On the upper left are three standard color temperatures ("6500K", "7500K", and "9300K") and a customizable one "USER" mode. On the upper right are the RGB color values: "R(Red)", "G(Green)", and "B(Blue)". If "6500K", "7500K", or "9300K" is chosen, all three bars will be dark and users can not adjust "R(Red)", "G(Green)", or "B(Blue)".
When "USER" mode is chosen, all three bars will be blue and users can adjust "R(Red)", "G(Green)", and "B(Blue)" by dragging them respectively.
53 / 56
www.huion.com
GS1333
8.3. Color Gamut Settings
Four color spaces: "Native", "sRGB", "Rec. 709", and "Adobe RGB" are displayed on the interface.
Note: In Native color space, values on the "Scene Mode" adjustment interface and "Color Temperature" adjustment interface can be freely adjusted or selected. While in sRGB, Rec.709, and Adobe RGB color spaces, to ensure that the standards of the three color spaces can be met as far as possible, only "Brightness" in "USER" mode can be adjusted.
54 / 56
www.huion.com
GS1333
Native
sRGBRec.709Adobe RGB
8.4. General Settings
On the menu are "TypeC", "HDMI", "Full", "4:3", "16:9", and "Reset"
to be chosen.
TypeC/HDMI: connect via a type-c cable or HDMI cable.
FULL: change the viewable area to full screen.
4:3: change the aspect ratio of viewable area to 4:3.
16:9: change the aspect ratio of viewable area to 16:9.
Reset: All the settings of the OSD menu will be reset to default ones.
Note: The pen-enabled OSD menu will automatically close if no operations are performed for a few moments.
55 / 56
www.huion.com
9. Troubleshooting
GS1333
Problems
The pen tablet cannot sense the pen pressure while the cursor can move.
The digital pen does not work.
The press key does not work.
The computer cannot enter sleeping mode.
The press key of the digital pen does not work.
The computer cannot recognize the pen display. Failed to connect Kamvas 13 to other device and " Device Disconnected " appears.
Solutions You may have installed other drivers or run the drawing software when installing the driver. Please uninstall all the drivers, close the drawing software, and then reinstall the Huion driver. It is suggested to restart your computer after finishing the installation. In addition, if the application is not compatible with the driver or does not support pressure sensitivity, there will also be no pressure sensitivity in this application. 1. Make sure you are using the pen that originally came with your tablet. 2. Make sure you installed the driver correctly. 1. Make sure you are using the pen that originally came with your tablet. 2. Make sure you installed the driver correctly. Please do not place the digital pen on the working area of the pen display when you are not using it, otherwise, the computer will not be able to enter sleep mode. The press keys of the digital pen will not work when the vertical distance between the pen nib and the tablet is over 10mm. If the vertical distance is within 10mm and the pen press key does not work, please check whether the driver works well and whether you have assigned functions to the two keys correctly or not. Then if the keys still do not work, maybe your pen is broken and you can contact our service team as long as the pen is under warranty. Please check whether the USB port of your computer functions well. If not, please try another USB port. Please restart your computer or driver; make sure the USB port and USB-C cable work well; unplug the USB cable and plug it again; try another USB port; download and reinstall the latest driver; please whitelist the driver on macOS devices.
If your problem is not resolved, please click FAQs to view more troubleshooting methods or email us(service@huion.com).
56 / 56
www.huion.com