VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Silver TV Cart for 32" to 83" Screens – VIVO - desk solutions, screen mounting, and more
Instruction Manual for VIVO models including: STAND-TV09 Silver TV Cart, STAND-TV09, Silver TV Cart, TV Cart, Cart
Silver TV Cart for 32" to 83" Screens – VIVO - desk solutions, screen mounting, and more
VIVO Aluminum Mobile TV Cart for 32 to 83 inch Screens up to 110 lbs, LCD LED OLED 4K Smart Flat, Curved Panels, Heavy Duty Stand with DVD Shelf, Locking Wheels, Max VESA 600x400, Silver, STAND-TV09 : Home
File Info : application/pdf, 12 Pages, 5.36MB
DocumentDocumentSilver Mobile TV Cart Instruction Manual SKU: STAND-TV09 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv09 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com Chat live with an agent! 309-278-5303 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. TIPOVER WARNING SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER. WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. PACKAGE CONTENTS A (x1) Mount B (x1) Upper Column C (x1) Lower Column D (x1) Base F (x1) Shelf G (x2) VESA Bracket H (x1) Column Cover I (x1) Left Cover E (x2) Leg J (x1) Right Cover K (x1) Support Plate L (x1) Handle M (x4) Caster N (x1) Grommet Cover S-A (x2) M6x8mm Screw S-B (x4) M6x12mm Screw M-A (x4) M6x14mm Screw M-B (x4) M8x16mm Screw S-C (x4) M6x16mm Screw M-C (x4) M6x30mm Screw S-D (x4) M8x20mm Screw M-D (x4) M8x35mm Screw S-E (x4) M8x30mm Screw S-F (x4) M6x40mm Screw M-E (x4) M8 Washer M-F (x4) Small Spacer M-G (x4) Large Spacer T-A (x1) 5mm Allen Wrench 2 T-B (x1) 6mm Allen Wrench T-C (x1) Wrench NOTE: SOMEHARDWARE INCLUDED MAY NOT BE USED TOOLS NEEDED Phillips Screwdriver 110 LBS (50kg) TV 11 LBS (5kg) DVD ASSEMBLY STEPS STEP 1 Slide Base (D) over Legs (E) and fasten using M6x16mm Screws (S-C), M6x40mm Screws (S-F), and 5mm Allen Wrench (T-A). D E S-C S-F T-A Snap Left and Right Covers (I, J) onto Base (D), making sure the arrows are facing towards the front. I J D 3 STEP 2 Press down the lever on Casters (M) to engage the lock. Screw Casters (M) onto Legs (E). ME M Note: Lock casters before installation Use to Wrench (T-C) to adjust Caster height if needed. T-C STEP 3 Lay Lower Column (C) on an elevated surface. Attach the base assembly to Lower Column (C) using Support Plate (K), M8x30mm Screws (S-E), and 6mm Allen Wrench (T-B). Note: During installation, ensure the wider ends of the components are all facing towards the front of the base. C S-E T-B K 4 STEP 4 Loosen screws on Shelf (F) using 5mm Allen Wrench (T-A) to create a gap 4mm or larger between the shelf and metal plates. Slide Shelf (F) onto Lower Column (C), aligning the metal plates within the slots. Adjust the Shelf to desired height and tighten screws uning 5mm Allen Wrench (T-A). T-A F C T-A 5 STEP 5 Attach Upper Column (B) to Lower Column (C) using M8x20mm Screws (S-D) and 6mm Allen Wrench (T-B). Slide Handle (L) onto Upper Column (B), ensure it fully covers the jointed section. Press Grommet Cover (N) into the cable access hole on Upper Column (B). B L C T-B S-D C B N 6 STEP 6 Loosen the screw on Mount (A) using 5mm Allen Wrench (T-A) to create a gap 4mm or larger between the mount and metal plates. Slide Mount (A) onto Upper Column (B) with the metal plates within the slots. B A 4mm T-A Adjust to desired height and tighten screws uning 5mm Allen Wrench (T-A). T-A H Install Column Cover (H) onto Upper Column (B). B 7 STEP 7 Attach VESA Brackets (G) to back of TV using appropriate screws (M-A thru M-D) and M8 Washers (M-E). If needed, Spacers (M-F, M-G) are provided. G M-A M-C M-B M-D M-E M-E M-F M-G STEP 8 Hang TV with VESA Brackets (G) onto Mount (A). Adjust the TV so it is positioned in the center of the Mount and fasten using M6x12mm Screws (S-B) and a Phillips screwdriver. A 8 G S-B Adjust as Desired LANDSCAPE ORIENTATION: Ensure the arrow on Mount (A) is facing up. Lock the position using M6x8mm Screws (S-A) and a Phillips screwdriver. A S-A PORTRAIT ORIENTATION: Rotate Mount (A) so the arrow is pointing sideways. Lock the position using M6x8mm Screws (S-A) and a Phillips screwdriver. A S-A Loosen the Knobs (A1) on Mount (A) to adjust the tilt of the TV. Retighten to secure. A A1 9 Cable Managment Use provided cable management holes on assembled stand to route cords. Store Allen Wrenches (T-A, T-B) in Handle (L) for future adjustments. T-B T-A L 10 [ THIS PAGE INTENTIONALLY LEFT BLANK ] 11 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 05/11/2023 REV3 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com