Trust MaxTrack Mouse
Quick Installation Guide
Model Number: 17178
Step 1: Connect the Mouse
Connect the USB cable of the Trust MaxTrack Mouse to an available USB port on your computer.
Diagram: A hand is shown inserting a USB connector into a computer's USB port. The connector is labeled 'USB'.
Step 2: Driver Installation
Your computer will automatically detect and install the necessary device driver software. This process typically takes approximately 5 seconds. A notification will appear on your screen confirming that the 'USB Human Interface Device' driver has been installed successfully.
Diagram: Shows two computer screen notifications. The first indicates 'Installing device driver software' with a link to check status. The second confirms 'USB Human Interface Device -- Device driver software installed successfully.' after a 5-second interval.
Step 3: Adjust DPI Settings
The MaxTrack Mouse features a DPI button that allows you to switch between different cursor sensitivity levels. You can select between 500 dpi and 1000 dpi.
Diagram: Illustrates the Trust MaxTrack Mouse, highlighting the DPI button. Text labels indicate the two available DPI settings: '500 dpi' and '1000 dpi'.
Step 4: Further Assistance
For additional support or to find answers to frequently asked questions, please visit the Trust support website.
Visit: trust.com/17178/faq
Diagram: Shows a web browser window displaying the Trust website with a search bar and navigation. A circular indicator highlights the FAQ section, and a small inset image shows the mouse.