Languages - STABILA Messgeräte Gustav Ullrich GmbH (EN-US)
Languages - STABILA Messgeräte Gustav Ullrich GmbH (EN-US)
User Manual for STABILA models including: TECH 700 DA, TECH DA, 700 DA, TECH 700 DA Digital Electronic Angle Finder, Digital Electronic Angle Finder, Digital Angle Finder, Electronic Angle Finder, Angle Finder
Stabila Elektronische Gradenboog en Waterpas TECH 700 DA, 80 cm | 19018
Stabila Elektronische Gradenboog en Waterpas TECH 700 DA, 45 cm | 18903
File Info : application/pdf, 10 Pages, 2.16MB
DocumentDocumentTECH 700 DA How true pro's measure User manual en Contents Section · 1. Intended use · 2. Components of the unit · 3. Insert batteries/Battery replacement · 4. Commissioning · 5. Automatic switch-off time · 6. Angle finder · 7. Spirit level · 8. Bevel gauge · 9. Reference function · 10. Lighting · 11. HOLD function · 12. Angle halving · 13. Calibration of zero position · 14. Technical Data Page 3 3 4 4 4 5 5 5 6 7 7 8 8 9 2 en On/Off Reference function HOLD function Angle halving Lighting 3 1. Intended use The STABILA TECH 700 DA is an electronic angle finder with digital display for quickly and easily measuring angles. Together with the vials, the angle finder can also be used as a spirit level. If you still have questions after reading through the operating instructions, you can obtain advice by telephone: +49 63 46 3 09 0 1.800.869.7460 U.S. and Canada Equipment and functions: · Electronics module with digital display for accurately setting and measuring angles · Vertical vial for vertical levelling · Horizontal vial for horizontal levelling 2. Components of the unit 1. 2 measuring surfaces 2. Vials - vertical and horizontal 3. Arm with 2 marking and cutting edges 4. LOCK system - to fix the set angle 5. Keyboard 6. Display 7. Battery compartment lid 1. 2. en 2x 1.5V alkaline AA, LR6, Mignon MN 1500 1x 1 Auto OFF 2 2h 1 sec 1x 4 3. Insert batteries / Battery replacement Unscrew battery compartment lid on front, insert new batteries according to symbol in battery compartment. Suitable rechargeable batteries can also be used. LCD: low battery charge - insert new battery Dispose of used batteries at suitable collection points - not with household waste. Do not leave in unit! Remove the batteries if you do not intend to use the unit for some time! 4. Commissioning After switching on, the version number S x.xx of the measuring program is briefly displayed. The unit is switched off by briefly pressing the "ON/OFF" button. The "OFF" confirmation appears for 1 second. 5. Automatic switch-off time If not used for long periods, the electronic angle finder automatically switches off after 2 hours. 0,5 mm/m 0,029° 0,75 mm/m 0,043° en 0°... 270° 6. Angle finder The angle finder displays the angle currently set between the arm and body. Angle measurements can be taken between 0° and 270°. 7. Spirit level The angle finder with 2 measuring surfaces is also a fully functional spirit level for horizontal and vertical measurements to level construction elements. High-quality STABILA technology makes the vials suitable for measurements: (1) in the normal position (2) in the reverse position 8. Bevel gauge The LOCK system can be used to fix the arm at the set angle. 5 en 1x 1x 2 sec 3 sec 1x 6 9. Reference function The REF button can be used to select any set angle as 0° reference. The angle details now displayed relate to this reference angle. The next time the arm is rotated, only the newly set angle is displayed. The display flashes in this setting. The REF symbol indicates this function setting. The original reference angle value is displayed for 2 seconds by briefly pressing the REF button. The reference angle is deleted by: · pressing and holding ( 3 sec) the REF button · switching off · the automatic switch-off function Positive and negative angles when adjusting the arm: angle greater than reference: positive angle less than reference: negative Only the negative sign is displayed en 1x 1x 1x 1x 10. Lighting Repeatedly pressing the "Lighting" button switches the display lighting on, to half luminance or off. 11. HOLD function The current measurement can be saved by pressing the HOLD button. The measurement is displayed continuously. In this setting, the display flashes and the HOLD symbol is displayed. This function can be used in combination with the reference function. The saved measurement is deleted by again pressing the HOLD button or switching the unit off. 7 en 1x 12. Angle halving The current measurement is halved by pressing the "Angle halving" button. The measurement is displayed continuously. In this setting, the display flashes and the "Angle halving" symbol is displayed. The value is deleted by again pressing the "Angle halving" button or switching the unit off. Display value 0.0° 1x 3 sec 13. Calibration of zero position During use, instances may arise when the display does not show 0.0° when the arm is swivelled all the way in. If this happens, first check whether dirt is preventing the arm from closing fully. If the display is still not showing 0.0°, the unit must be calibrated. With the arm folded all the way in, the zero position is calibrated by pressing and holding the ON/OFF button. "CAL" is displayed for approx. 1 second. Successful calibration is confirmed with "rdy". The unit cannot be recalibrated if "Error" appears on the display. The angle finder must be returned for inspection. 8 en 14. Technical Data Accuracy of electronics module: Angle measurement: ± 0.1° Accuracy of spirit level: in normal position: in reverse position: 0.5 mm / m = 0.029° 0.75 mm / m = 0.043° Measuring range: 0° - 270° Batteries : 2 x 1.5 V alkaline, size Mignon, AA, LR6 Operating life : 150 hours Operating temperature range: -10 °C to +50 °C / 14°F to 122°F Storage temperature range: -20 °C to +65 °C / -4°F to 149°F Protection class: IP 54 Subject to technical modifications. 9 Europe Middle and South America Australia Asia Africa STABILAMessgeräte Gustav Ullrich GmbH P.O. Box 13 40 / D-76851 Annweiler Landauer Str. 45 / D-76855 Annweiler + 49 63 46 309 - 0 info@de.stabila.com USA Canada STABILAInc. 332 Industrial Drive South Elgin , IL60177 800-869-7460 custservice@Stabila.com www.stabila.com