intl.com
APPA
User Manual for APPA models including: A1, 700020080, A1 Mini AC DC Clamp Meter, Mini AC DC Clamp Meter, DC Clamp Meter, AC Clamp Meter
A1 EN Battery Replacement SPECIFICATIONS 1-1 General Specifications Display Count : 6000 count Overrange Display : ”OL or “-OL” Conversion Rate : 2 times / second Dimensions (W x H x D) : 60 x 147 x 31.5 mm
File Info : application/pdf, 50 Pages, 7.37MB
DocumentDocumentA1
User Manual / /
YEAR S
LIMITE D WARRAN TY
EN Mini AC / DC Clamp Meter TC / SC / JP AC DC RU
A1
EN
Read First
Safety Information
Use the Meter only as specified in this manual or the protection by the Meter might be impaired. - Always use proper terminals, switch position
and range for measurements. - Verify the Meter's operation by measuring a
known voltage. If in doubt, have the Meter serviced. - Do not apply more than the rated voltage, as marked on Meter. - To avoid false readings that can lead to electric shock and injury, replace battery as soon as low battery indicator blinks. - Do not use Meter around explosive gas or vapor. - To reduce the risk of fire or electric shock do not expose this product to rain or moisture. - Individual protective equipment should be used if HAZARDOUS LIVE parts in the installation where measurement is to be carried out could be ACCESSIBLE.
Caution
Do not expose Meter to extremes in temperature of high humidity.
1
A1
EN
Symbols as marked on the Meter and Instruction manual
Risk of electric shock
See instruction manual
DC measurement
AC measurement
Equipment protected by double or reinforced insulation
Battery
Earth
Conforms to EU directives Application around and removal from hazardous live conductors is permitted Do not discard this product or throw away
Maintenance Do not attempt to repair this Clamp Meter. It contains no user-serviceable parts. Repair or servicing should only be performed by qualified personnel.
Cleaning Periodically wipe the case with a dry cloth and detergent. Do not use abrasives or solvents.
2
A1
EN
Power on/off
Auto Power Off
Auto Power Off Disable
Hold
down and press
3
A1 ACA & DCA
EN
CAT. III 600V with respect to earth for the jaw
Barrier for Hand Guard
Do not hold the meter across the Barrier
Auto ACA&DCA Detection / ACA&DCA
Dut to the high sensitivity of the clamp meter, perform DCA Zero in the same direction as measurement to avoid interference by external magnetic field.
4
A1
EN
Data Hold
The display will flash continuously if the measured signal is larger 50counts than the display reading. However, it cannot detect across the AC and DC Current. DCA ZERO
Inrush Current
The meter calculates the RMS value for 100ms as detecting a more than 5A current.
5
A1
EN
Low Pass Filter
The cut-off frequency of the low pass filter is about 160Hz with attenuation characteristic of approx-24db/octave. Backlight on/off
Voltsense
Do not hold the meter across the Barrier Barrier for Hand Guard
The number of dashes displaying on the LCD indicates the electric field intensity. If no indication, voltage could still be present.
6
A1
EN
Battery Replacement
SPECIFICATIONS
1-1 General Specifications
Display Count : 6000 count Overrange Display : "OL or "-OL" Conversion Rate : 2 times / second Dimensions (W x H x D) : 60 x 147 x 31.5 mm Weight : 140 g Power requirement : LR44 Size Button Battery 1.5V x 2 Battery Life : 20 hours. Maximum Conductor Size : 22 mm LVD : EN61010-1, EN61010-2-032 EMC : EN61326-1 Installation category : CAT.III. 600V.
CAT
Application field
I The circuits not connected to mains.
II The circuits directly connected to Low voltage installation.
III The building installation.
IV The source of the Low-voltage installation.
7
A1
EN
1-2 Environmental Conditions
Indoor Use. Maximum operating altitude : 2000m (6562ft) Operating temperature : 0°C ~ 30°C, 80%RH 30°C ~ 40°C, 75%RH 40°C ~ 50°C, 45%RH Storage temperature : -20 to +60°C, 0 to 80% RH (no batteries). Temperature coefficient : 0.2 x (Specified accuracy) / °C, < 18°C, > 28°C Pollution Degree : 2 Shock vibration : MIL-PRF-28800F for A class 2 Instrument Drop Protection : 4 Feet Drop to hardwood on concrete Floor
1-3 Electrical Specifications
Accuracy is given as ±(% of reading + counts of least significant digit) at 23°C ± 5°C,with relative humidity Less than 80% R.H. and is specified for one year after calibration. ACV and ACA specifications are ac coupled,true R.M.S. The crest factor may be up to 3.0 as 4000 counts. For non-sinusoidal waveforms, Additional Accuracy by Crest Factor (C.F.): Add 3.0% for C.F. 1.0 ~ 2.0. Add 5.0% for C.F. 2.0 ~ 2.5. Add 7.0% for C.F. 2.5 ~ 3.0. Position Error of Clamp: ±1.5% of LCD reading.
8
A1
EN
DC Current
Range 60.00A (1)
Resolution 0.01A
Accuracy ±(1.5%+10D) (2)
300.0A
0.1A
±(1.5%+5D)
(1) There are less than 0.3A variation as measuring in different directions.
(2) Add 10D to accuracy in Auto AC & DC Sense Mode.
AC Current
Range
Resolution
Accuracy (50 ~ 100Hz)
Accuracy (100 ~ 400Hz)
60.00A 300.0A
0.01A 0.1A
±(1.5% +25D) ±(2.5%+25D)
for < 3A
for < 3A
±(1.5% +5D) ±(2.5%+5D)
for 3A
for 3A
Frequency Response: 50 ~ 400Hz (Sine Wave)
Low-pass Filter
Range 60.00A 300.0A
Resolution 0.01A 0.1A
Accuracy (50Hz/60Hz)
±(3.5%+25D) for < 3A
±(3.5%+5D) for 3A
Cut-off Frequency (-3dB) : Approx. 160Hz Attenuation Characteristic : Approx. -24dB / Oct
Inrush Current
Range
Resolution
300.0A
300.0A
Integration Time : 100ms Trigger Current : 5.0 A
VoltSense Voltage Range : 80V ~ 600V (At the tip of clamp)
9
A1
EN
Limited Warranty
This Meter is warranted to the original purchaser against defects in material and workmanship for 3 years from the date of purchase. During this warranty period, manufacturer will, at its option, replace or repair the defective unit, subject to verification of the defect or malfunction.
This warranty does not cover fuses, disposable batteries, or damage from abuse, neglect, accident, unauthorized repair, alteration, contamination, or abnormal conditions of operation or handling.
Any implied warranties arising out of the sale of this product, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited to the above. The manufacturer shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim or claims for such damage, expense or economic loss. Some states or countries laws vary, so the above limitations or exclusions may not apply to you.
10
A1
TC
- -
- -
- -
-
DC AC 11
A1
TC
1
20 12
A1
TC
Hold
downandpress
ACA & DCA
CATIII 600V
13
A1
TC
ACA&DCA ACA&DCA
1
DCA
50 AC DC
14
A1
TC
DCA
2
LPF
LPF
>5A
5A RMS 100ms
LPF
160Hz -24dB
15
A1
TC
Voltsense
LCD
16
A1
TC
1-1
6000 OL-OL 2 x x 60 x 147 x 31.5 mm 140g LR44 1.5V x 2 20 22mm LVDEN61010-1EN61010-2-032 EMCEN61326-1 CAT.III.600V
CAT
I
II
III
IV
1-2
2000m (6562ft) 0° C ~ 30° C 80%RH 30° C ~ 40° C 75%RH 40° C ~ 50° C 45%RH -20 60° C0 80% RH 0.2 x ( ) / ° C< 18° C > 28° C 2 MIL-PRF-28800F 2 4
17
A1
TC
1-3
23° C ± 5° C 80% R.H. ±(% + ) ACV ACA 4000 3.0 (C.F.) C.F. 1.0 ~ 2.0 3.0% C.F. 2.0 ~ 2.5 5.0% C.F. 2.5 ~ 3.0 7.0% LCD ±1.5%
DC
60.00A (1)
0.01A
±(1.5%+10D) (2)
300.0A
0.1A
±(1.5%+5D)
(1) 0.3A (2) AC & DC 10D
AC
(50 ~ 100Hz) (100 ~ 400Hz)
60.00A 300.0A
0.01A 0.1A
±(1.5% +25D) ±(2.5% +25D)
< 3A
< 3A
±(1.5% +5D) ±(2.5% +5D)
3A
3A
50 ~ 400Hz
(50Hz/60Hz)
60.00A 300.0A
0.01A 0.1A
±(3.5% +25D) < 3A
±(3.5% +5D) 3A
(-3dB) 160Hz -24dB
18
A1
TC
300.0A 100ms 5.0A
300.0A
80V ~ 600V
3
19
A1
SC
- -
- -
- -
-
DC AC 20
A1
SC
1
20 21
A1
SC
Hold
downandpress
ACA & DCA
CATIII 600V
22
A1
SC
ACA&DCA ACA&DCA
1
DCA
50 AC DC
23
A1
SC
DCA
2
LPF
LPF
>5A
5A RMS 100ms
LPF
160Hz -24dB
24
A1
SC
Voltsense
LCD
25
A1
SC
1-1
6000 OL-OL 2 x x 60 x 147 x 31.5 mm 140g LR44 1.5V x 2 20 22mm LVDEN61010-1EN61010-2-032 EMCEN61326-1 CAT.III.600V
CAT
I
II
III
IV
1-2
2000m (6562ft) 0° C ~ 30° C 80%RH 30° C ~ 40° C 75%RH 40° C ~ 50° C 45%RH -20 60° C0 80% RH 0.2 x ( ) / ° C< 18° C > 28° C 2 MIL-PRF-28800F 2 4
26
A1
SC
1-3
23° C ± 5° C 80% R.H. ±(% + ) ACV ACA 4000 3.0 (C.F.) C.F. 1.0 ~ 2.0 3.0% C.F. 2.0 ~ 2.5 5.0% C.F. 2.5 ~ 3.0 7.0% LCD ±1.5%
DC
60.00A (1)
0.01A
±(1.5%+10D) (2)
300.0A
0.1A
±(1.5%+5D)
(1) 0.3A (2) AC & DC 10D
AC
(50 ~ 100Hz) (100 ~ 400Hz)
60.00A 300.0A
0.01A 0.1A
±(1.5% +25D) ±(2.5% +25D)
< 3A
< 3A
±(1.5% +5D) ±(2.5% +5D)
3A
3A
50 ~ 400Hz
(50Hz/60Hz)
60.00A 300.0A
0.01A 0.1A
±(3.5% +25D) < 3A
±(3.5% +5D) 3A
(-3dB) 160Hz -24dB
27
A1
SC
300.0A 100ms 5.0A
300.0A
80V ~ 600V
3
28
A1
JP
-
-
- - - - -
29
A1
JP
DC AC
EU
30
A1
JP
/
1
20 APO
Hold
downand press
31
A1 ACA & DCA
JP
III 600V
ACA & DCA /ACA & DCA
2
-
32
A1
JP
50 AC DC
DCA
2
LPF
>5A
5A 100 ms RMS
33
A1
JP
LPF
LPF
160Hz -24db/
/
CLD
34
A1
JP
1-1
6000 OL-OL 2 x x 60 x 147 x 31.5 mm 140 g LR44 1.5V x 2 20 22 mm LVDEN61010-1 EN61010-2-032 EMCEN61326-1 III600V
I
II
III IV
35
A1
JP
1-2
6562ft (2000m) 0°C 30°C80%RH 30°C 40°C75%RH 40°C 50°C45%RH -20 +60°C0 80% RH ( ) 0.2 x ( ) / °C< 18°C> 28°C 2 MIL-PRF-28800F 2 4 ft 1.2m
1-3
80% 23°C ± 5°C ±( % + ) 1 ACV ACA AC 4000 3.0 C.F. : 3.0% C.F.1.0 2.0 5.0% C.F.2.0 2.5 7.0% C.F.2.5 3.0 LCD ±1.5%
36
A1
JP
DC
60.00A (1)
0.01 A
±(1.5%+10D) (2)
300.0 A
0.1 A
±(1.5%+5D)
(1) 0.3A
(2) AC&DC 10D
AC
(50 ~ 100Hz) (100 ~ 400Hz)
60.00 A 300.0 A
0.01 A 0.1 A
< 3A < 3A ±(1.5% +25D) ±(2.5% +25D)
3A 3A ±(1.5% +5D) ±(2.5% +5D)
50~400Hz
60.00 A 300.0 A
0.01 A 0.1 A
(50Hz/60Hz)
< 3A ±(3.5% +25D)
3A ±(3.5% +5D)
(-3dB) 160Hz -24dB / Oct
300.0 A
300.0 A
100ms 5.0 A
80V 600V ( )
37
A1
JP
3
38
A1
RU
; . ,
. , . . , , . , , , . . . , , , .
.
39
A1
RU
,
.
. , . .
. .
40
A1
RU
/
.
1
20
.
Hold
downan, dpress
41
A1 ACA DCA
RU
CAT. III, 600
ACA DCA / ACA DCA
>1
- ,
42
A1
100A
RU
50 . , . , , .
(DCA Zero)
>1
LPF
LPF
>5
100 5 .
43
A1
LPF
1A/1k
RU
LPF
160 -24 .
/
VoltSense
, -, . .
44
A1
RU
1-1
: 6000 . : OL -OL : 2 ( x x ): 60 x 147 x 31,5 : 140 : 2 1,5 LR44 : 20 : 22 : EN61010-1, EN61010-2-032 : EN61326-1 : CAT.III. 600 .
CAT
I , .
II , .
III .
IV .
45
A1
RU
1-2
. : 2000 (6562 ) : 030 °C, . 80 % 3040 °C, . 75 % 4050 °C, . 45 % : -20 60 °C, 0 80 % RH ( ). : 0,2 x ( ) / °C, < 18 °C, > 28 °C : 2 : MIL-PRF-28800F 2 : 4
1-3
± (% + ) 23 °C ± 5 °C, . 80 % . ACV ACA: , . 3,0 4000 . (): 3,0 % 1,02,0. 5,0 % 2,02,5. 7,0 % 2,53,0. : ± 1,5 % -.
46
A1
RU
60,00 (1) 300,0 A
0,01 A 0,1 A
± (1,5 % + 10 . ) (2)
± (1,5 % + 5 . )
(1) 0,3 .
(2) . . 10 . .
(50100 )
(100400 )
60,00 A 300,0 A
0,01 A 0,1 A
± (1,5 % + 25 .
± (2,5 % + 25 .
) < 3 ) < 3
± (1,5 % + 5 . ) ± (2,5 % + 5 .
3 ) 3
: 50400 ( )
(50/60 )
60,00 A 300,0 A
0,01 A 0,1 A
± (3,5 % + 25 . ) < 3
± (3,5 % + 5 . ) 3
(3 ): 160 : 24
300,0 A
300,0 A
: 100 : 5,0 A
VoltSense
: 80600 ( )
47
A1
RU
3 . .
, , , , , , .
, , , , , . , , , , . , .
48
www.appatech.com
APAC MGL APPA Corporation
cs.apac@mgl-intl.com Flat 4-1, 4/F, No. 35, Section 3 Minquan East Road, Taipei, Taiwan Tel: +886 2-2508-0877
: / : : : : : : : 35 4 : cs.apac@mgl-intl.com : 02-2508-0877
/ 72 400-099-1987 cs.cn@mgl-intl.com
700020080