Casdon Dyson Ball Toy Vacuum Cleaner

Step 1: Assemble the Wand and Main Body

Insert the wand into the main body of the vacuum. Ensure the parts connect securely, indicated by an audible 'Click!' sound. ?

Illustration shows the upper wand being inserted into the main vacuum body. A warning symbol ⚠️ indicates caution. An arrow points to the connection point, and a 'Click!' graphic confirms successful assembly.

Step 2: Install Batteries and Power On

Open the battery compartment and insert four C (LR14) batteries ?. Use the power switch to turn the vacuum on and off ▶️.

Diagram shows the battery compartment cover being opened, four C (LR14) batteries being inserted in the correct orientation, and the power switch being toggled.

Step 3: Adjust Handle Height

Adjust the handle height for comfortable use. Pull the handle upwards to extend its length.

An illustration depicts the vacuum handle being pulled upwards to increase its length, with an arrow indicating the direction of movement.

Step 4: Use the Vacuum

Use the toy vacuum cleaner to pick up small, lightweight debris.

The upright toy vacuum is shown in use on a floor surface, with the cleaning head in contact with the ground.

Step 5: Empty the Dust Compartment

Empty the dust compartment after use. Detach the compartment and dispose of collected debris.

An image shows how to detach the dust collection bin from the main body of the vacuum cleaner.

Step 6: Storage

Store the vacuum cleaner safely after use. A warning symbol ⚠️ advises caution during storage.

The toy vacuum cleaner is shown in a stored position, with a warning symbol indicating caution.