eufy C30 2K Video Doorbell

1. FOR VIDEO DOORBELL INSTALLATION

What You Need

• ? Phillips-Head Screwdriver
• ड्रिल Power Drill (15/64" Drill Bit)

To work with the Minibase Chime:

Open the eufy Security App, navigate to Doorbell Settings > Indoor Chime > Minibase Chime, and follow the in-app instructions to complete the setup.

When the Minibase Chime is working with the doorbell:

• The Minibase Chime functions solely as a chime.
• Please insert the SD card into the doorbell to store videos.

What's in the Box

• Video Doorbell C30 (Model: T8224)
• USB-C Charging Cable
• Mounting Bracket
• Screw Hole Positioning Card
• Screw Pack
• Detaching Pin
• Quick Start Guide

2. AT A GLANCE

Front View

Diagram showing the front of the eufy Video Doorbell C30 with numbered components:

• ① Motion Sensor
• ② Camera Lens
• ③ Microphone
• ④ Ambient Light Sensor
• ⑤ LED Ring / Doorbell Button

Rear View

Diagram showing the rear of the eufy Video Doorbell C30 with numbered components:

• ① Detaching Mechanism
• ② USB-C Port: Use to charge the doorbell.
• ③ SYNC Button: Press to turn on the doorbell. Press and hold for 2 seconds until you hear a beep to set up the doorbell (Optional). Press quickly 5 times within 3 seconds to turn off the doorbell.
• ④ SD Card Slot
• ⑤ QR Code: Scan to add the doorbell in the app.
• ⑥ Speaker

3. HOW THE SYSTEM WORKS

Works Independently

This video doorbell can operate independently once connected to your home wireless router. You have multiple options to receive notifications and hear a ring when someone presses your video doorbell:

• Use a eufy Security doorbell chime (sold separately).
• Use an Amazon Alexa Echo Show device.

Works with eufy Security HomeBase (Optional)

The video doorbell detects motion at your porch and allows you to answer the door from anywhere, anytime. Video clips can be stored in the built-in storage of your eufy HomeBase S380 (sold separately). When someone rings the doorbell, occupants in the house will be notified.

Diagram illustrating the doorbell working with a HomeBase, showing motion detection and notification.

4. CHARGING THE DOORBELL

Step 1: Pull out the silicone lid on the back of the doorbell and plug the charging cable into the charging port.

Step 2: Plug the charging cable into a USB power adapter, then plug the power adapter into the wall. Fully charge the doorbell before installation.

Diagram showing the process of connecting the charging cable to the doorbell and then to a power adapter and wall outlet.

5. SETTING UP THE SYSTEM

Step 1: Download and install the eufy Security app, then sign in or create an account.

Step 2: Follow the in-app instructions to add the video doorbell.

Diagram showing the eufy Security app interface on a smartphone and the video doorbell.

6. MOUNTING THE DOORBELL

Choose a Location

1. Take the video doorbell to your front door and check the live view in the app. Choose a location that provides the desired field of view. Consider the following factors:

• Check if existing holes and anchors in the wall or door frame can be reused.
• If placing the doorbell near a side wall, ensure the wall is not within the field of view to prevent IR light reflection and blurred night vision.
• If drilling mounting holes for the first time, the recommended height is 48" (1.2m) above the ground.

Diagram illustrating recommended mounting height (1.2m / 48") and field of view considerations for the doorbell installation.

2. Place the screw hole positioning card against the wall to mark the location. If mounting on a hard wall (brick, concrete, or stucco), use a 15/64" (5.95mm) drill bit to drill 2 holes through the screw hole positioning card.

Text indicating required tools: ? Phillips-Head Screwdriver; ड्रिल Power Drill (15/64" Drill Bit).

Mount the Bracket

Use the provided screws to secure the mounting bracket on the wall.

Diagrams showing how to mount the bracket on a wooden wall and a hard wall using screws.

Install the Doorbell

Align the doorbell with the bottom of the mounting bracket, then press the top of the doorbell into place until it clicks.

Diagram illustrating the process of attaching the doorbell to the mounted bracket.

Recharging the Doorbell

1. Insert the detaching pin into the pin hole on the top of the doorbell, then lift the top for removal.

2. Repeat steps in "CHARGING THE DOORBELL".

Diagram showing how to use the detaching pin to remove the doorbell.