User Guide for PLIANT TECHNOLOGIES models including: PBT-VMNT-MTRT V Mount Battery Adapter, PBT-VMNT-MTRT, V Mount Battery Adapter, Mount Battery Adapter, Battery Adapter, Adapter
File Info : application/pdf, 2 Pages, 192.65KB
DocumentDocumentCHARGING Charge battery (sold separately) via the D-Tap connector on the side of the battery under the larger rubber cover or via D-Tap connector on the side of the V-Mount Battery Adapter. IN THIS BOX WHAT'S INCLUDED WITH V-MOUNT BATTERY ADAPTER? · V-Mount Battery Adapter · 2 Short Mounting Screws · 4 Long Mounting Screws · Quick Start Guide ACCESSORIES S O LD S E PA R AT E LY · PBT-LI98-VMNT: IndiPRO Tools 98Wh Micro-Series V-Mount Li-Ion Battery and Charger · PAC-RTM-SMU: Single Transceiver Multi-Use Mounting Bracket · CrewCom Radio Transceiver (RT) CUSTOMER SUPPORT Pliant Technologies offers technical support via phone and email from 07:00 to 19:00 Central Time (UTC-06:00), Monday through Friday. +1.844.475.4268 or +1.334.321.1160 customer.support@plianttechnologies.com You may also visit our website (www.plianttechnologies.com) for live chat help. (Live chat available 08:00 to 17:00 Central Time (UTC-06:00), Monday through Friday.) COPYRIGHT © 2024 Pliant Technologies, LLC. All rights reserved. Pliant® and the Pliant "P" logo are registered trademarks of Pliant Technologies, LLC. Any and all other trademark references within this document are property of their respective owners. Document Reference: D0000696_B QUICK START GUIDE V-MOUNT B AT T E R Y ADAPTER P B T- V M N T- M T R T This document only applies to PBT-VMNT-MTRT. For more information visit www.plianttechnologies.com SETUP 1. Make sure you have all required items for assembly (from left to right): · V-Mount Battery Adapter · 4 Long Mounting Screws · V-Mount Battery (sold separately) · RT Mounting Bracket (sold separately) · 2 Short Mounting Screws · CrewCom RT (sold separately) 5. Attach a V-Mount Battery to power the CrewCom RT. Below is the completed setup. 2. Use the 2 Short Mounting Screws to attach the RT Mounting Bracket to the CrewCom RT. You will use the 2 short screws that come with the V-Mount Battery Adapter, not the thumb screws that come with the RT Mounting Bracket. 3. Use the 4 Long Mounting Screws to attach the V-Mount Battery Adapter to the RT Mounting Bracket. 4. Plug the V-Mount Battery Adapter cord into the CrewCom RT power connection. Note: To remove the battery, press the release button on the top of the V-Mount Battery Adapter.