Timily BT LED Headphone User Manual

Timily BT LED Headphone

This manual provides instructions for the Timily BT LED Headphone.

Package Contents:

• 1 x Bluetooth Headphone (17cm X 8cm X 19cm)
• 1 x Charging Cable (15cm)
• 1 x Instruction Manual

Button Description:

• M: ON/OFF/Pause/Play Music
• +: Short press to increase volume / long press for Next song
• -: Short press to reduce volume / long press for Previous song

How To Use:

• Power on: Press and hold the 'M' button for 2 seconds. The blue LED will light up and a voice prompt will indicate "power on", signifying pairing mode.
• Pairing: Activate Bluetooth on your phone and select "RIMIT ST HEADPHONE." from the list. The blue LED will stop flashing upon successful pairing, and you will hear "connected". The blue LED will flash while music is playing.
• Play/Pause: Press the 'M' button once to pause music, and press it again to resume playback.
• Volume up: Press the '+' button once to increase volume.
• Volume down: Press the '-' button once to decrease volume.
• Previous song: Press and hold the '-' button to play the previous song.
• Next song: Press and hold the '+' button to play the next song.

Technical Specifications:

• Model Number: MU01041
• Range: 33ft / 10 in.
• Battery Capacity: 200 mAh
• Voltage: 3.7 V
• Play Time: 4-5 hours
• Charge Time: 2-3 hours
• Charging Input: 5V-111.50 mA
• Frequency Response: 20Hz-20 kHz
• Operating Temperature Range: 0-45°C

FAQ:

1. Why can't I start my Bluetooth headphone?
   Ensure the headphone is fully charged before first use.
2. Why won't sound come out of the headphones?
   Verify that the playback device and the Bluetooth headphone are successfully connected. Adjust the volume on both your mobile phone and the Bluetooth headphone.
3. Why can't I find this headphone in my Bluetooth options?
   Make sure Bluetooth is in "visible mode." If no pairing occurs, the Bluetooth function may automatically shut off. Re-enable "visible mode." If issues persist, try rebooting your phone and restarting the headphone.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Warnings:

• Charge and operate only as indicated in this manual. Improper use may result in damage or injury.
• Do not dismantle the device or insert objects into the headphone to avoid shock or injury.
• Turn off the product in facilities where posted notices instruct you to do so to avoid electronic interference and/or compatibility conflicts.
• Do not pull the headphone charging cable, as damage may result.
• Keep out of reach of children. This is not a toy.
• Avoid exposure to moisture, liquids, heat, flame, and high voltage equipment.
• Follow these instructions as they contain important information.
• Do not short circuit the input terminals of the headphone.
• Do not drop, place heavy weight on, or allow heavy impact to the headphone.
• Do not crush or delete the PCB of the battery.
• Do not flood the battery body.
• Do not disassemble or dispose of in fire.
• Do not use the product while driving or crossing the road.
• No power protection device at the input.

RF Warning Statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID:

2A2H6-MU01041

Distribution Information:

Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Made in China

Keep all relevant information for future reference.

Trademark Information:

The Bluetooth® word mark and logos are owned by the Bluetooth® SIG. All other trademarks appearing herein are the property of their respective owners. Depends upon their party device compatibility.

California Proposition 65 Warning:

This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.