MasterPRO BGMP-9089 Cordless Water Kettle - User Manual

Product Overview

This document provides instructions for the MasterPRO BGMP-9089 cordless water kettle, manufactured by Carlo Cracco.

Model: BGMP-9089

Power: AC220-240V, 50Hz/60Hz, 1850W

Certifications: CE, RoHS compliant.

Disposal: This symbol [Recycling symbol] on the product or packaging indicates that this product must not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health.

Components

• 1. Hinged Lid
• 2. ON/OFF Switch
• 3. Indicator Light
• 4. Power Base

Important Safeguards

• Use the appliance exclusively for private and intended domestic purposes. Not for commercial use or outdoors unless specified.
• Keep away from heat, direct sunlight, humidity, and sharp edges. Do not immerse in liquids.
• Do not use with wet hands. Unplug immediately if the appliance becomes humid or wet. Do not touch water.
• Always switch off and unplug the appliance when not in use, when attaching accessories, or for cleaning/troubleshooting.
• Do not operate the appliance without supervision. Switch off or unplug if leaving the workplace.
• Regularly check the appliance and cable for damage. Do not use if damaged.
• Do not attempt to repair the appliance yourself. Contact an authorized technician. Faulty cables must be replaced by the manufacturer, customer service, or a qualified person with an equivalent cable.
• Use only original spare parts.
• Keep packaging (plastic bags, boxes, polystyrene) out of reach of children. Caution: Plastic film poses a suffocation risk.
• Ensure the cable is not hanging low and children cannot access the appliance.
• Do not overfill; boiling water may be ejected. The maximum level is marked inside.
• Ensure the lid is correctly positioned before operating to avoid scalding.
• Scalding may occur if the lid is removed while heating.
• Do not use the kettle for purposes other than heating water; other liquids or food will contaminate the interior.

Initial Operation

• Before first use, fill the kettle with clean water to maximum capacity, boil, discard the water, and repeat.
• Always unplug the kettle when filling or adding water.
• Fill the kettle with water to the desired level. Do not overfill (risk of spillage/spitting). Close the lid after filling; otherwise, the kettle may not switch off automatically.
• Do not fill with less than 0.5 liters (MIN indication) to prevent the kettle running dry.
• Do not fill with more than 1.7 liters (MAX indication).
• The kettle has an automatic safety cut-out for overheating protection. If activated due to insufficient water, unplug, let cool for 5-10 minutes, refill, and switch on.
• Place the power base on a dry, flat surface.
• Place the kettle on the power base; electrical connections are made automatically.
• Plug the cord set into an earthed power socket.
• Switch on by pressing the ON/OFF switch; the pilot light will illuminate.
• The kettle will switch off automatically when the water has boiled.
• Do not remove the kettle from the power base without switching off first.
• To pour water, lift the kettle from the power base and pour.

Cleaning

• Wipe the exterior with a soft, damp cloth or sponge.
• Use a cloth moistened with mild liquid detergent for stubborn spots.
• Do not use abrasive scouring pads or powders.
• Never immerse the kettle, cord, or base in water or other liquids.
• Clean the appliance only after it has completely cooled down.
• Ensure the power cord remains dry.
• Ensure electrical connections are dry before operating.

Descaling

• Descale the kettle regularly, at least twice a year for normal use.
• Fill the kettle to "MAX" with a mixture of one part vinegar and two parts water. Switch on and wait for it to switch off automatically.
• Let the mixture remain inside the kettle overnight.
• Discard the mixture the next morning.
• Fill the kettle with clean water up to "MAX" and boil again.
• Discard this boiled water to remove any remaining scale and vinegar.
• Rinse the inside of the kettle with clean water.