Instructions for D Addario models including: PW-CT-16 Micro Banjo Tuner, PW-CT-16, Micro Banjo Tuner, Banjo Tuner, Tuner
Micro Banjo Tuner | Accessories | D'Addario
MICRO BANJO TUNER Designed specifically for banjos, the Micro Banjo Tuner features a full-color display with four selectable viewing angles (2 vertical, 2 horizontal) in an attractive, compact design for discreet tuning. The advanced tuning algorithms allow you to tune in noisy environments, while the non-marring hoop mounting bracket allows for stress-free installation. The bright, full-color display allows for easy viewing in any environment, and the tuner does not require removal when the instrument is stored. It's so small, convenient, and accurate, you'll want one for every banjo you own! Vertical View sharp in tune flat Horizontal View flat in tune sharp Orientation Button: Scroll through four viewing angles. Cursor Buttons: Adjust tuner calibration from 410 to 480Hz. Power Button: Toggle tuner on and off. Tuner automatically powers off after 10 minutes. MOUNTING INSTRUCTIONS: A. Slide one side of hoop bracket completely under tension rods in mounting location. B. While sliding bracket in opposite direction, place other side of bracket under opposing tension rods by applying light pressure to the hoop bracket. C. Center bracket so it pivots on one tension rod. Reverse procedure to remove bracket. Picture A Picture B Press down Picture C Do not bend bracket, as it could cause bracket to deform or break!Adobe PDF library 16.03 Adobe Illustrator(R) 24.0