Product Details
The C30 is a compact wireless adapter designed to connect audio devices to a speaker dock. It features indicator LEDs and a dock connector.
Adapter Description: A dark blue, rounded, compact device with a matte finish. It has a small, slightly raised area on top with three indicator lights labeled 'Blue LED', 'IR Receiver', and 'Red LED'. Below the device is a separate dock connector piece.
Connection: The adapter connects to the speaker dock via its dock connector. The LED window side should face outward when inserted.
Setup Instructions
- Insert the adapter into the Speaker Dock's connector, ensuring the LED window side faces outward.
- Turn on the Speaker Dock and select the 'IPOD' input source. (This step may not be necessary if 'IPOD' is the only input option.)
- Pair the device. Adjust the volume of the Speaker Dock and the adapter to an appropriate level. Refer to the "Pairing Method" section for detailed steps.
- Music playback and control can be managed via a connected cellphone or the remote controller. Refer to the "Remote Controller Navigation" section for details.
Visual Aid Description: An illustration shows the adapter being inserted into the speaker dock. The adapter's connector aligns with the port on the dock, which has a large screen-like surface.
Remote Controller
Navigation
The remote control allows for wireless operation of the connected device.
- POWER ON/OFF ?: Turns the device on or off.
- PAIR ?: Enters pairing mode or re-connects to a device.
- Play/Pause ▶️/⏸️: Controls music playback.
- Previous Track ⏪: Skips to the previous track.
- Next Track ⏩: Skips to the next track.
- Volume Down ?: Decreases volume.
- Volume Up ?: Increases volume.
- EQ ?️: Cycles through sound effect modes (Standard, Bass Boost, Treble Boost).
Visual Aid Description: A white, oval-shaped remote control is depicted with buttons labeled POWER ON/OFF, PAIR, Play/Pause, Previous Track, Next Track, VOL-, VOL+, and EQ. Arrows point to labels describing their functions.
Battery Replacement
The remote controller uses a CR2025 battery, which typically lasts about 6 months with normal use. Replace the battery when the remote no longer operates the unit.
If the remote will not be used for an extended period, remove the battery to prevent leakage and corrosion damage.
Visual Aid Description: A diagram shows the back of the remote with the battery compartment open. A CR2025 coin cell battery is being inserted with the '+' side facing up.
Pairing and Connectivity
Pairing Method
When first powered on, the adapter automatically enters pairing mode (Red and Blue LEDs flashing alternately). If it does not, press the "PAIR" button on the remote controller.
- Open the Bluetooth settings on your cellphone or BT-enabled device.
- Search for BT devices and select "C30". Enter "0000" as the PIN code if prompted.
- The Blue LED will flash slowly upon successful pairing.
Note:
- If the distance between the adapter and BT device exceeds 10 meters (33 feet), the connection may drop. Devices will automatically reconnect when back within range. If disconnected for over 3 minutes, manual reconnection via the "PAIR" button or cellphone BT settings may be required.
- If the adapter has previously paired, it will attempt to auto-reconnect to the last paired device.
- To pair with a new device after initial pairing, press the "PAIR" button to re-enter pairing mode.
Connecting Two Devices
To connect two devices:
- Pair the first cellphone using the standard pairing method.
- Press the "PAIR" button again to enter pairing mode for the second cellphone.
- Connect to "C30" from the second cellphone's Bluetooth settings.
To reconnect to the first cellphone after pairing the second, you may need to manually select "C30" from the first cellphone's Bluetooth settings.
LED Indicators
- Red LED solid: Power off.
- Red and Blue LEDs flashing alternately: Pairing mode.
- Blue LED flashing slowly: Connected and playing audio.
- Red LED flashes briefly: IR remote command received.
Specifications
- BT effective range: 10 meters (33 feet)
- Remote controller effective range: 6 meters (20 feet)
- Remote controller battery: CR2025
Troubleshooting
| Symptom | Possible Problem | Solution |
|---|---|---|
| Cannot power on | Check Speaker Dock power; ensure adapter is firmly mounted. | Turn on Speaker Dock, disconnect and reinsert the adapter. |
| No sound | Speaker Dock input source not set to 'IPOD'. | Select 'IPOD' as the input source on the Speaker Dock. |
| Cannot automatic connection | Adapter auto-connect timed out and entered standby mode. | Press the remote controller's "PAIR" button and wait for reconnection. Alternatively, use the "Power on/off" key to cycle power. |
| Cannot discover adapter | Adapter not in pairing mode. | Press the remote controller's "PAIR" button. Red and Blue LEDs flashing alternately indicate pairing mode. |
| Remote controller no function | Battery exhausted; remote out of range or angle. | Replace with a new CR2025 battery. Use the remote within the effective range (approx. 6 meters). |
Storage & Maintenance
- Store the wireless adapter in a cool, dry place. Recommended working temperature: -10°C to 45°C (14°F to 113°F).
- The adapter is not waterproof. Clean with a soft, dry cloth.
- Do not use sharp objects to clean or connect with the adapter.
- Avoid using the adapter in extreme temperatures (very high or low) or humid environments.
Note: Design and specifications are subject to change without notice.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product Warranty
Product Name: C30 Wireless Bluetooth Adapter
Product Model Number: C30
Purchase Date: _________________________
Invoice Number: _________________________
Customer Name: _________________________
Customer Phone: _________________________
Customer Address: _________________________
Warranty Terms
- A manual and warranty card are included in the package. Users should fill out the warranty card and keep it as proof of purchase.
- Within one year from the date of purchase, if the adapter experiences quality problems under normal use, the user is entitled to free repair services. The following are NOT covered by warranty:
- Warranty card without dealer signature or seal.
- Damage caused by human error or force majeure.
- Normal wear and tear of the machine.
- For failures caused by human error, exceeding the warranty period, or irresistible reasons, repair costs will be charged.
- If the product requires factory repair, please contact the company and provide your name, address, telephone number, and a description of the fault.