Bkav AI View 4 Channel AI Box

Model: E120-FCWP

Product Kit

AI Box
12VDC/1A Adapter
Wi-Fi Antenna
GPS antenna
Terminal block

Included are an Installation guide and a Thank you letter.

Technical Specification

Power	DC12V 1A/PoE
Processor	Qualcomm QCS605
Memory	8GB RAM, 16GB FLASH
Operating temperature	-20°C ~ 60°C (-4°F - 140°F)
Connective	WLAN 802.11 a/b/g/n/ac 2.4/5GHz 2x2 MIMO, Ethernet Integrated PoE/RJ45 1Gbps, Bluetooth 5.0, Location GPS/GLONASS/Beidou
Dimensions (L x W x H)	L136 x W80 x H51mm
Weight	0.99lbs (450g)

Product Overview

The AI Box features:

Network/Status/Power PWR/STATUS/LAN LEDs
Mode Button
DI/DO terminal

Front/Side/Back Panel Connections:

Wi-Fi, GPS, MIC, AUDIO, Wi-Fi ports
DC12V, LAN, USB TYPE-C, HDMI ports
SD CARD slot
SD RESET button

Installation Guide

Step 1: Attach the bracket to the AI Box using the provided sunk head screws.
Step 2: Secure the assembly to a wall or panel using the provided tapping screws and anchors.
Step 3: Install the dual Wi-Fi Antenna.
Step 4: Install the GPS Antenna.
Step 5: Connect Mic, Audio, USB Type-C, and Micro HDMI cables.
Step 6: Insert the SD Card.
Step 7: Connect the DI/DO terminal connector to the AI Box.
Step 8: Connect external cables to the DI/DO terminals on the connector. Use a screwdriver to tighten the screws on the connector to secure the wires.

DI/DO Pin Configuration

Pin	Description
DI1+	1st Alarm input signal line terminal, positive
DI1-	1st Alarm input signal line terminal, negative (GND)
DI2+	2nd Alarm input signal line terminal, positive
DI2-	2nd Alarm input signal line terminal, negative (GND)
DOA	1st Alarm output signal line terminal 1
DOB	1st Alarm output signal line terminal 2
DOC	2nd Alarm output signal line terminal 1
DOD	2nd Alarm output signal line terminal 2

Signal Connection

Two options to connect devices:

Option 1: Use the network cable connected from the PoE switch to the PoE interface on the AI Box. No need for a 12VDC power supply.
Option 2: Use a 12VDC power supply and connect the AI Box to the network switch using a LAN cable.

Diagrams illustrate connecting multiple network cameras to the AI Box via a PoE switch or a 12VDC adapter.

Accessing the AI Box

Password Setting

The AI Box IP address is set to DHCP by default. Use the AI View Scanner App to find the IP address. Refer to the WebUI User Manual for detailed installation steps. Upon initial access, you will be prompted to reset the password.

In the "Administrator password change" window:

For passwords 8-9 characters long, use at least 3 character types: uppercase letters, lowercase letters, numbers, and special characters.
For passwords 10-15 characters long, use at least 2 character types.
Special characters include: ~ ` ! @ # $ % ^ & * ( ) _ - = + | {{ }} [ ] . ? /

Login Screen

When accessing the AI Box, a login window will appear. Enter your username and password:

Enter "admin" in the <User name> field.
Enter your chosen password in the <Password> field.
Click the arrow icon ▶️.

Reset Procedure

The reset button is used for factory reset. To reset the device: Unplug the Box, press and hold the reset button, plug in the power, and continue holding for about 10 seconds before releasing. The Box will perform a factory reset and boot up.

Safety Information

Follow these guidelines for proper device operation:

Recommended to use shielded network cables (STP).
Recommended to use CAT5e or higher network cables.
Store the AI Box in a cool, dry, and well-ventilated environment.
Avoid impact or placing heavy objects on the AI Box.
Do not install the AI Box on unstable pillars, brackets, surfaces, or walls.
Do not use chemicals or detergents to clean the device. Use a damp cloth for cleaning.
Use only standard tools and accessories for installation. Bkav recommends using the manufacturer's power supply or a compatible equivalent. Improper installation may damage the product.
Contact Bkav customer support or authorized agents for assistance.

Transportation

Use the original packaging or equivalent to prevent damage during transport.

Warranty Information

For Al View product warranty and related information, visit aiview.ai/warranty.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notes:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation in a residential area may cause harmful interference, requiring the user to correct it at their own expense.
The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance, as such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC RF exposure guidelines, maintain a distance of at least 20 cm between the radiator and your body, and ensure proper operating and installation support.
For 5150-5250 and 5725-5850 frequency bands: Operations are restricted to indoor use only.
For 5G: Emissions are maintained within the band of operation under all normal operating conditions. Maximum frequency stability is less than 20ppm.