Smart Bracelet

Getting Started

Compatible Platforms and Requirements

Android: 4.4 and above

iOS: 8.5 and above (iPhone 5s and above)

Hardware Requirement: Bluetooth 4.0 support

Initial Use Preparation

Ensure the device has sufficient battery before first use. If the battery is too low to power on, charge for 1-1.5 hours. The device cannot be operated while charging. A charging indicator will be displayed.

Note: If the device is not used for a long time, ensure it is charged once every 3 months.

App Download and Connection

Download the "WearFit" app to connect and use the smart bracelet.

Method 1: Scan the QR code provided to download the app.

[QR code for WearFit app download]

Method 2: Search for "WearFit" in the Apple App Store (for iPhones) or "应用宝" (for Android phones) and download it.

Connection Instruction:

• Ensure Bluetooth is enabled on your phone.
• Open the "WearFit" app and select the option to link to the bracelet.
• Find the device name in the list and click it to connect.
• Once connected, you will enter the main interface.

Bracelet Functions

• Time Mode: Displays time, date, and battery level on the watch face. Time automatically synchronizes with the phone once connected to the app.
• Status Mode: Records daily steps, walking distance, and calories consumed.
• Heart Rate Measurement: Automatically measures heart rate hourly, or can be measured manually by switching to the heart rate interface and pressing and holding.
• Blood Pressure Measurement: Automatically measures blood pressure hourly, or can be measured manually by switching to the blood pressure interface and pressing and holding.
• Blood Oxygen Measurement: Automatically measures blood oxygen levels hourly, or can be measured manually by switching to the blood oxygen interface and pressing and holding.
• Sport Mode: Press and hold on the sport mode interface to enter. Available modes include Outdoor Run, Indoor Run, Cycling, Walking, and Exercise. Press and hold within a mode to start recording exercise time and calories. Press to pause, press and hold to return.
• Weather: When connected to the app and with phone GPS enabled, the bracelet synchronizes real-time weather conditions from the phone and displays them on the time interface.
• More Functions:
  • Do Not Disturb: Press and hold to cancel or turn on vibration.
  • Music Control: Press and hold to enter the music playback interface. Press to switch tracks/play/pause, press and hold to confirm.
  • Timer: Press and hold to enter the timer function. Press to pause or continue.
  • Find My Phone: Press and hold for 5 seconds to enter phone finding mode. Press the touch button to start locating the phone via ringtone and vibration. Press the touch button to stop. (Requires Bluetooth connection and within range).
• Settings:
  • Power Off: Press and hold to turn off, press to switch options.
  • Reset: Press and hold to access reset options, press to switch.
  • About: Press and hold to view firmware version and MAC address. Press and hold to return or it will return automatically after 5 seconds.
• Other Functions: Charging alerts, alarm reminders, sedentary reminders, incoming call display, shake to take photos, system updates, WeChat/QQ/SMS notifications.

Troubleshooting (Q&A)

1. Cannot find bracelet or connect?

   • Android: Ensure Bluetooth is on and the bracelet is not already connected (no Bluetooth icon displayed on the bracelet). Ensure phone system is Android 4.4 or above. Move closer to the bracelet and try searching/connecting again. If still unable, go to phone settings → Application Management → Authorization Management → Application Permissions Management, find "WearFit", and allow all permissions. Also, go to phone settings → GPS location and turn on GPS. Restart the phone and try connecting again.
   • iOS: Ensure Bluetooth is on and the bracelet is not already connected. If previously connected, go to phone settings → Bluetooth → "Ignore this device" to allow the app to detect the bracelet.
   • Ensure the bracelet is fully charged.

2. App shows no connection after binding, or connected but battery is 0%?

   The app is not successfully bound with the bracelet. Please rebind the device.

3. App shows no data?

   Pull down the main interface to refresh and manually synchronize data. Automatic synchronization occurs upon first binding and then hourly. Ensure hourly measurements (step count, heart rate, fatigue) are enabled in the app settings, as these are used for histograms.

4. Data not loading after pull-down refresh in the app?

   Go to App Settings → Restore Factory Settings → Click Restore Factory Settings. Turn off the bracelet, then restart it and reconnect with the app. Data should then load correctly.

5. Bracelet time not synchronizing after connecting with phone?

   Check phone settings → Application Management/Permissions Management. Ensure app permissions are enabled. Reconnect the bracelet and pull down to refresh the app's main interface.

Basic Parameters

Remarks

• For product quality issues or unclear usage, please contact the seller via email for prompt assistance.
• Measurement results are for reference only and not for medical purposes. Consult a doctor for diagnosis and treatment.
• The product has an IP67 waterproof rating for daily life use. It is not suitable for diving or prolonged submersion. Avoid hot water, as steam can affect the device.
• The company reserves the right to modify the manual's content without prior notice. Functionality may vary slightly across different software versions.