Buy musical instruments online from the market leader – United States
User Guide for the t bone models including: Tour Mini MKII TX Transmitter, Mini MKII TX Transmitter, MKII TX Transmitter, TX Transmitter, Transmitter
the t.bone Tour Guide Mini MKII TX – Thomann España
20 mar 2024 — Quick start guide. This document contains important information on the safe use of the product. Read and follow the safety instructions and all other ...
File Info : application/pdf, 2 Pages, 312.11KB
DocumentDocumentEN Tour Guide Mini MKII TX Quick start guide This document contains important information on the safe use of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference. If you pass the product on to others, please include this document. Contents are subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. Safety instructions Intended use This device is designed to convert acoustic signals into radio signals and transmit them. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damage resulting from improper use. This device may be used only by persons with sufficient physical, sensory, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety. Risk of injury and choking hazard for children! Children can suffocate on packaging material and small parts. Children can injure themselves when handling the product. Never allow children to play with the packaging material and the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervision. Keep small parts away from children and make sure that the device does not shed any small parts (such as knobs) that children could play with. Possible hearing damage due to high volumes on headphones or earphones! The use of headphones or earphones at high volumes or for an extended period of time may result in permanent hearing impairment. Set the volume of your audio device to a medium value. Do not use the headphones or earphones for more than about an hour a day. Operating location Never use this product: in direct sunlight in conditions of extreme temperature or humidity in extremely dusty or dirty places in locations where the device may get wet in the vicinity of magnetic fields General handling To prevent damage, never exert force while operating the device. Never immerse the device in water. Wipe only with a clean and dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents Keep the device away from impurities! Keep the device away containers with liquid. Should liquid enter the device, this could lead to its destruction or fire. Ensure that no metallic parts enter the device. Interference with other electrical devices Using the device near radios or TV sets may cause interference. In that case, increase the distance between the devices. Notes on radio transmission This equipment uses a frequency range that is free of charge and registration within the European Union (EU). For more information, please visit: www.thomann.de. During operation, make sure that transmitter and receiver are set to the same channel. Never set more than one transmitter to the same channel. Make sure that no metal objects are located between transmitter and receiver. Avoid interference by other radio and in-ear systems. Features 20 transmission channels available 3.5 mm mini jack input Built-in rechargeable Li-polymer battery (3.7 V · 630 mAh) Range: 70 m Micro-USB charging port 11 hours of operation per battery charge Technical specifications Number of systems that can be operated in parallel: 4 in a radius of 3 m Charging connection: Micro-USB Audio input: 3.5 mm jack socket, unbalanced Audio frequency transmission range: 30 Hz 4 kHz Audio sampling rate: 8 kHz, 16 bit Dynamic range: > 70 dB Signal-to-noise ratio: > 65 dB Total harmonic distortion: < 1.0% Carrier frequency range: UHF 863 865 MHz Max. transmission power: 10 mW Modulation: Charging source: Battery: Charging time: Temperature range: Relative humidity Dimensions (W × H × D): Weight: GFSK 5 V Micro-USB Li-polymer (630 mAh / 3.7 V ) < 7 hours 0 °C...40 °C 20%...80% (non-condensing) 40 mm× 69 mm× 12 mm 34 g EN Tour Guide Mini MKII TX Operating elements & ö TOobperseite # BUonttteormseite $% FrontFsreointet SeSitiedneavnieswicht BRaücckkseite 1. LCD 2. Channel down / decrease volume 3. Switching on and off / calling up setting parameters 4. Channel up / increase volume 5. Eye for lanyard 6. Headset connection 7. Micro-USB charging port Channel/frequency table 863 ~ 865 MHz Chan- Frequen- Chan- Frequen- Chan- Frequen- Chan- Frequen- nel cy nel cy nel cy nel cy 01 863.050 06 863.650 11 863.150 16 863.750 ' 02 864.850 07 863.250 12 864.950 17 863.350 03 864.050 08 864.650 13 864.150 18 864.750 ( 04 863.450 09 864.250 14 863.550 19 864.350 05 864.450 10 863.850 15 864.550 20 863.950 To reset the software, press [+] and [] simultaneously four times and then keep them pressed until "01" and "02" flash on the display. If "01" is flashing, press the [-] button and then confirm with the on/ off button. Now try to connect the transmitter and the receiver. Operating the device 1. Charge the device on a suitable USB charging station. It takes around 6 hours to fully charge the built-in battery. 2. Connect the cable of a microphone or a line level source to the 3.5 mini jack socket (6). 3. Press and hold the on/off button (3) for two seconds to switch on the device. The LCD (1) lights up and displays the current transmission channel. 4. To select a different channel, press and hold [+] and [] (4, 2) simultaneously for two seconds. "CH" flashes on the display and the symbol disappears. Use [+] or [-] to select the required channel. 5. To confirm your selection, briefly press the on/off button (3) or wait five seconds until the device has saved the new channel automatically. "CH" stops flashing and the symbol appears again. Make sure that the transmitter and the receiver are al- ways set to the same transmission channel. 6. The volume level is set to 4 by default. Four levels be- tween (4) and (full) are available. Press [+] (4) to increase the volume, and press [] (2) to lower the volume. To mute, briefly press button 3. 7. To change the sensitivity of the sender input from "Mic" (default) to "Line", press and hold the [] button (3) for five seconds until the symbol flashes. 8. The symbol appears on the display when the battery is fully charged. If the symbol flashes on the display, the charge has dropped to 10%, which means you need to charge the battery. The following symbol appears during charging: 9. The device switches itself off during charging. To use it while it is charging, press and hold the on/off button (4) for two seconds to switch on the device. 10. The device switches off automatically after 20 minutes if no signal is receive on the input. To switch off the device manually, press and hold the on/off button (3) for two seconds. The minimum distance between the transmitter and the receiver is 30 cm. Discover the entire t.bone range on our website: tbone.audio Visit us on Instagram and discover the full audio experience: tbone.audio/instagram Visit our YouTube channel for product videos and interesting stories: tbone.audio/youtube Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended. Do not dispose of your old device with your normal household waste. Dispose of the product through an approved waste disposal firm or through your local waste management facility. When disposing of the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste management facility. Batteries must not be thrown away or burnt, but must instead be disposed of in line with the local regulations on the disposal of hazardous waste. Use the available collection sites. Only dispose of lithium batteries when they are empty. Remove lithium batteries from the device before disposal. Protect used lithium batteries against short circuit, for example by taping the poles. Dispose the solid state lithium batteries together with the device. Please check for an appropriate reception facility. Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de DocID: 572684_16.10.2023