Case Features
Diagram showing the CG530 PC case with components labeled A through F: A: Tempered Glass Side Panel, B: Right Side Panel, C: Tempered Glass Front Panel, D: Top Dust Filter, E: Bottom Dust Filter, F: Hard Disk Bracket.
Case Specifications
- Length: 440mm
- Width: 285mm
- Height: 399mm
- Maximum GPU length: 410mm
- Maximum PSU length: 210mm
- Maximum CPU cooler height: 160mm
Fan Locations
- Front: NA
- Top: 3x120mm / 2x140mm
- Rear: 1x120mm
- Side: 3x120mm / 2x140mm
- Bottom: 3x120mm / 3.5 HDD + 2x120mm / 2.5 SSD + 2x120mm
Radiator Compatibility
- Front: NA
- Top: 120/140/240/280/360mm
- Side: 120/140/240/280mm
- Bottom: 120/240/360mm
Detailed Specifications
Diagram illustrating the external dimensions of the ATX case: 440mm (length), 285mm (width), and 399mm (height).
Diagrams indicating fan and radiator mounting capabilities: - Rear: Supports one 120mm fan. - Side: Supports three 120mm or two 140mm fans; compatible with 120/140/240/280mm radiators. - Top: Supports three 120mm or two 140mm fans; compatible with 120/140/240/280/360mm radiators. - Bottom: Supports three 120mm fans; accommodates 3.5" HDDs and 2.5" SSDs; compatible with 120/240/360mm radiators.
Installation Guidance
Removing the Side Panel
To remove the side panel, unscrew the rear retention screws and slide the panel outwards.
Diagram shows the rear of the case with screws indicated for removal, and arrows demonstrating the sliding motion to detach the side panel.
Installing the Motherboard
The motherboard tray supports various form factors, including ITX, M-ATX, and ATX. Ensure correct alignment with standoffs.
Diagram of the motherboard tray highlighting mounting points for ITX, M-ATX, and ATX motherboards. Text indicates support for M-ATX/ATX rear connector motherboards.
Installing the GPU
Install Graphics Processing Units (GPUs) into the appropriate PCIe expansion slots.
Diagram showing the interior of the PC case, focusing on the expansion slot area for GPU installation.
Installing HDDs
3.5" Hard Disk Drives (HDDs) are installed into the dedicated hard disk bracket. Secure the HDD within the bracket using screws.
Diagrams illustrating the process of mounting a 3.5" HDD into the hard disk bracket and securing it with screws.
Installing SSDs
2.5" Solid State Drives (SSDs) can be mounted onto the designated bracket. Secure the SSDs with screws.
Diagrams showing 2.5" SSDs being attached to a mounting bracket and fastened with screws.
Installing the Power Supply
The Power Supply Unit (PSU) is installed at the rear of the case. Align and secure the PSU in its bay.
Diagram showing the power supply unit (PSU) being inserted into its bay at the rear of the PC case and secured.
Front I/O Panel and Connectors
The front panel provides convenient access to essential ports:
- USB 2.0
- USB 3.0 (x2)
- MIC/AUDIO
- RESET Button
- POWER Button
Internal connectors for the front panel include USB3.0, USB2.0, HD AUDIO, and F_PANEL (front panel header).
Diagrams of the front panel I/O ports and their corresponding internal connector types.
Compliance and Materials
This section details the hazardous substances compliance according to relevant standards.
Hazardous Substances or Elements| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|
| Housing/Chassis | ○ | ○ | ○ | ○ | ○ | ○ |
| Plastic | ○ | ○ | ○ | ○ | ○ | ○ |
| Screws | ○ | ○ | ○ | ○ | ○ | ○ |
| Integrated Circuit | ○ | ○ | ○ | ○ | ○ | ○ |
| Accessory Pack | ○ | ○ | ○ | ○ | ○ | ○ |
Notes:
- This table is compiled according to SJ/T 11364.
- The environmental protection use period mark 10 ♻️ indicates a 10-year service life under normal working temperature and humidity conditions.
- ○: Content is below the GB/T 26572 limit.
- ×: Content exceeds GB/T 26572 limit in at least one homogeneous material, but complies with EU RoHS due to technical limitations.
Compliance logos: CE, 10-year environmental protection mark ♻️, recycling symbol, UKCA.
