User Manual for VIOTEK models including: GNV29CB, 29-Inch Ultrawide Curved Gaming Monitor
Apr 09, 2020 · Screwdriver x 1 User Manual x 1 Extra screws may be included as backup. NO. 2 Screws x 4 (for Wall Mounting) 27.5mm 17mm. 6 Section 3: Product Overview 3.1 ...
Screwdriver x 1 User Manual x 1 Extra screws may be included as backup. NO. 2 Screws x 4 (for Wall Mounting) 27.5mm 17mm. 6 Section 3: Product Overview 3.1 – Monitor Buttons 7 Audio Output: Insert the audio cable for output of audio signals.
bluetooth manual filetype:pdf after:2020-05-05
File Info : application/pdf, 16 Pages, 2.38MB
DocumentDocumentGNV29CB
GAMING MONITOR USER MANUAL
In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials.
Table of Contents
Section 1: Safety Precautions..................................................... 4 Section 2: Box Contents .............................................................. 5 Section 3: Product Overview....................................................... 6
3.1 Monitor Buttons ............................................................... 6 3.2 Monitor Ports................................................................... 6 Section 4: Stand Installation ....................................................... 7 Section 5: Mount Installation ...................................................... 8 Section 6: Basic Operation.......................................................... 9 Section 7: Indicator Light ............................................................ 9 Section 8: OSD.............................................................................. 10 8.1 OSD Menu Functions ...................................................... 10 Section 9: RGB, LED Effects and GAMEPLUS .......................... 12 Section 10: Troubleshooting ....................................................... 13 Section 11: Specifications ........................................................... 14 Section 12: Three-Year Limited Hardware Warranty................. 14
3
Section 1: Safety Precautions
Read and observe the following warnings and information below.
1. Before cleaning, always unplug your monitor. Only use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid blocking these openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources, e.g., portable heaters or heating vents, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor's screen or any part of the monitor.
6. Do not insert anything into any part of the monitor especially the ventilation openings.
7. Always make sure your monitor is placed on a secure, level surface to prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use. 9. Do not place heavy items on the monitor or monitor cables. 10. Do not attempt to disassemble or remove parts from the monitor. Any
disassembly or modification not performed by an authorized technician can result in damage to the monitor and/or possible exposure to high voltage electricity which may lead to serious injury or death.
VIOTEK® shall not be held responsible for injury or damage of products or persons due to failure to adhere to the aforementioned precautions or any others noted hereafter.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
4
Section 2: Box Contents
Monitor x 1
Stand Stem x 1
Stand Base x 1
Decorative Cover x 1
27.5mm 17mm
NO. 1 Screws x 3 (for Stand Installation)
NO. 2 Screws x 4 (for Wall Mounting)
DP Cable x 1
Power Cable x 1
Screwdriver x 1
User Manual x 1
Extra screws may be included as backup. 5
Section 3: Product Overview 3.1 Monitor Buttons
1 2
3
4 56
1 M Menu Button: Press to display the OSD menu or enter sub-menus. 2 Down Button: Press to move down in the menus. 3 Up Button: Press to move up in the menus. 4 E Exit Button: Press to exit. 5 Power Button: Press to turn the monitor on/off. 6 LED Indicator: Changes colors to indicate status. Refer to Section 7.
3.2 Monitor Ports
HDMI 2.0 HDMI1.4
7
8
9
10
7 Audio Output: Insert the audio cable for output of audio signals.
8 DP Connector: Insert one end of the DP cable into the computer's DP output and connect the other end to the monitor's DP port.
9 HDMI Connectors: Insert one end of the HDMI cable into the computer's HDMI output and connect the other end to the monitor's HDMI port.
10 Power Connector: Insert the power cable to supply power to the monitor.
6
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand. 1. Open the package and take out the monitor with foam still attached. Gently place
it on a desktop or table. 2. Take out the stem and base. Insert the stem into the base then use the included
screwdriver and one NO.1 screw to fasten base to the stem.
Stand Stem
Base
NO.1 Screw x 1
3. Remove the foam covering the back of the monitor, then insert the stem with base into the adapter on the back of monitor. Use one NO. 1 screw to fasten stem onto the adapter.
4. Take out the decorative cover and cover it in place on the stem.
NO.1 Screw x 1
Decorative Cover
5. With the stand fully assembled, reattach it onto the back of monitor. Then remove the remaining foam on monitor and stand it up on a flat, level desktop or table.
Make sure the monitor is laid on a flat surface before removing the stand. 7
Section 5: Mount Installation
1. Open the package and take out the product with foam still attached. Gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor is already attached to the stand, remove the stand.
Hole
Adapter
2. Gently put one finger into the hole of adapter then pull it out to remove it from the back of monitor, then follow the below picture to tighten the included four NO. 2 screws onto the mounting holes on back of monitor.
27.5 mm NO.2 Screws x 2
17 mm NO.2 Screws x 2
3. Install the monitor on the wall, mount, or fixture as desired.
Mount (Not included)
8
Section 6: Basic Operation
1. Insert one end of the DP cable into your PC's graphics card. An HDMI cable may also be used. HDMI cable not included.
2. Connect the other end of the cable to the corresponding connector on your monitor. DP Connector
HDMI Connectors
3. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
Overclocking (DP Only) Depending on your graphics card, it may be possible to overclock the monitor's refresh rate, up to 120Hz. Doing so may limit max. resolution as determined by your graphics card. You must use an HDMI 2.0 connection or DisplayPort to reach higher refresh rates.
Overclocking can result in image distortion based on the configuration of the connected device. It may be possible to reduce distortion by lowering monitor resolution.
Overclocking has the potential to damage the monitor. Damage caused by overclocking is not covered by the warranty.
AMD FreeSync This feature is off by default. To activate, you must have hardware with FreeSync capability, a DP or HDMI cable, and the latest graphic drivers. After connecting your computer and monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your computer. If you do not, you may need to enable the function in your graphics card menu. See your graphics card manufacturer's documentation for instructions.
Section 7: Indicator Light
Indicator Light Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source, no horizontal or vertical signal has been detected or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected.
9
Section 8: OSD
The On-Screen Display (OSD) Menu may be used to adjust your monitor's settings and appears on screen after turning on the monitor and pressing the M button.
When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer's setting configurations.
1. Press any one of the buttons (M, , , E, ) to activate the navigator screen.
eco
2. Press M to enter the OSD screen.
DP
Input Source Brightness/Contrast Color Setting Picture Quality Setting Display Audio Multi-Window OSD Other
DP HDMI1 (2.0) HDMI2 (1.4)
Resolution1920x1080@200Hz
Window1 InputSourceDP Resolution1920x1080@200Hz
Window2: InputSource Resolution
3. Press eco or
to browse functions.
- Highlight the desired function and then press M to enter the sub-menu.
- Press eco or
to browse sub-menus then press M to highlight the desired function.
- Press eco or
to highlight an option and then press M to confirm the settings and
exit the current screen.
4. Press E to exit the current screen.
8.1 OSD Menu Functions
Main Menu Sub-Menu
Input Source
DP HDMI 1 2.0 HDMI 2 1.4
Options NONE NONE
Description Switch to DP signal input Switch to HDMI signal input
10
Main Menu Sub-Menu
Options
Description
Brightness
Blacklevel
Brightness/ Contrast
Contrast
DCR
Gamma
Color Setting
Picture Mode
Color Temperature Low Blue Light Hue
0~100
Adjust display brightness
0~100
Adjust blacklevel
0~100
Adjust display contrast
On
Turn on DCR function
Off
Turn off DCR function
Gamma 1.8, Gamma 2.0, Gamma 2.2, Gamma 2.4 , Gamma 2.6
Set Gamma add-in
Standard, Photo,
Movie, Game, FPS, Set visual mode according to activity
RTS
Warm, Cool, User Select color temperature
0~100 Hue
Set blue light filtering level Adjust hue levels
Saturation
Saturation
Adjust saturation levels
Picture Quality Setting
Display
Sharpness
0~100
Adjust display sharpness
Response Time
Off, High, Middle, Low
Noise
Reduction
Off, High, Low
Middle,
Adjust response time
Reduce the interference of image noise caused by signal source interference
SuperResolution
Off, High, Middle, Low
When the resolution of the display screen is low, this function can be turned on to enhance the image resolution.
Dynamic Luminous Control
Aspect Ratio
On, Off
Wide Screen, 4:3, Auto
Compensate for gray scale display screen and strengthen the expression of gray scale Select on-screen aspect ratio
LED Mode
Normal, Flicker, Off Select LED display mode
Audio
Mute Volume
Audio Source
On, Off 0-100
Auto Source, DP, HDMI-1, HDMI-2
Turn mute mode on/off Adjust audio volume
Select audio signal input via HDMI or DP
MultiWindow
Multi-Window
Off, PIP Mode, PBP Select PIP/PBP modes according to the
2Win
number of input signals, etc.
Sub Win2 Input
DP, HDMI-1, HDMI- Select according to input signal for PIP/
2
PBP mode
PIP Size
Small, Medium, Large
Adjust the PIP/PBP display window size
PIP Position
Top Right, Top Left, Bottom Right, Adjust the PIP/PBP window position Bottom Left
Swap
NONE
Swap the PIP/PBP signal sources
11
Main Menu Sub-Menu
Options
Description
OSD
English,
Language
Español, Set OSD language
,
Français,
OSD H-Position 0-100
Adjust the OSD's horizontal position
OSD V-Position 0-100
Adjust the OSD's vertical position
OSD Transparency
0-100
Adjust OSD's overall transparency
OSD Time Out 5-100
Set how long the OSD remains open after non-use
OSD Rotation
Normal, 90, 180, 270
When the user flips the display, this function can also flip the OSD to achieve the best display angle
Other
DP Version
DP 1.2, DP1.4
FreeSync (Adaptive Sync)
On, Off
Reset
Display DP version Turn the FreeSync function on/off Reset monitor configurations
Section 9: RGB, LED Effects and GAMEPLUS
· Press any one of the buttons (M, , , E, ) to activate the navigation window.
eco
· Press to switch GAMEPLUS modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.
· Press eco button to switch ECO modes. These modes (Standard, Photo, Movie, Game, FPS, and RTS) can be used to optimize settings according to your activity. Standard mode is suitable for most activities.
Standard
· Press E to set RGB range (Limited or Full) effects.
RGB Range:Limited
12
Section 10: Troubleshooting
The screen is blank · Press the power button to turn the monitor on. · Confirm the brightness and contrast settings are set normally. · Check if the indicator light is flashing. If so, there is no signal from your video source. · If your source is a notebook or laptop, be sure that its settings are in mirror or
extension mode and the device itself is powered on. The image is out of focus · Ensure the video cable is inserted properly at both ends. The screen is flashing · Try an alternative power source. If the current one is insufficient, it may be causing
this issue. · Ensure devices such as non-shielded speakers, fluorescent lighting, AC transformers,
table fans, etc., are a safe distance away from your screen to avoid magnetic disturbances. The color bleeds or visual effects appear unusual. · If your screen is all red or blue, or if any colors disappear, check to see that the cable is properly inserted. A loose connection can cause a bad signal. · Try connecting to another video source for comparison. The screen appears to be scrolling, rolling, or moving unusually. · Check that your source frequency is within 75Hz. · Reconnect and ensure your video cable is secure. The monitor needs cleaning · Make sure the monitor has been powered off before cleaning. · Always use soft, non-abrasive cloth when cleaning. · Use dry, non-abrasive cloth to gently remove debris or dust. · If necessary, lightly dampen a non-abrasive cloth with water and gently clean the surface. · Never use alcohol or ammonia-based cleaning solutions. · Never spray liquid directly onto any part of the monitor. The indicator light does not work · Check if the power is on. · Check if the power line connected with power. Cannot plug and play. · Make sure the monitor is compatible with PC. · Make sure the graphics card is compatible with the monitor. · Check cable connectors for curved or damaged pins. Replace cables if needed. Dim image · Adjust the brightness and contrast ratio. Image jitter/moire pattern · Nearby electric equipment may interfere with the monitor. Light indicator is on or flashing, but there is no image displayed on screen · Check if the monitor is receiving power. · Check if the graphics card is installed properly. · Make sure the power cable is securely connected to the monitor. · Check cable connectors for curved or damaged pins. Replace cables if needed. Color shortage (red, green, or blue) · Check cable connectors for curved or damaged pins. Replace cables if needed. Color difference (colors are not optimized) · Adjust RGB color or reset color temperature settings.
13
Section 11: Specifications
Item Model Number Screen Size Curvature Resolution Aspect Ratio Refresh Rate Response Time FreeSync Range Typical Brightness Default Color Temp. Displayable Colors Color Gamut Contrast Ratio Pixel Pitch Backlight Viewing Angle Tilt Adjust LED Indicator OSD Language Connection Ports VESA Working Height Power Power Consumption Usage Temp.
Dimension (With Stand) Weight
Detail GNV29CB 29" 1200R 2560 x 1080p 21:9 75Hz / 120Hz (overclock) 5ms (GTG) 48Hz-120Hz 280 cd/m2 6500 16.7 million 99% sRGB; 85% NTSC 3000:1 0.26595 x 0.26595 E-LED H178° / V178° (approx.) Forward 5°±2°; Backward 15°±2° Power on: Blue (solid); Power saving: Blue (flashing) English, Español, , Français, 1x HDMI 1.4, 1x HDMI 2.0, 1x DisplayPort 1.2 75 x 75mm 5000m DC 12V, Min 4A Typical: 36W; Max: 50W; Off/Sleep mode 0.5W 32°F~104°F (operating), -4°F~ 140°F (storage), 10-85% RH (non-condensing) 27.3 x 7.3 x 16.2 in (693.26 x 186.58 x 410.52mm) 9.2 lb. (net) / 13.5 lb. (with packaging)
Section 12: Three-Year Limited Hardware Warranty
Your VIOTEK® GNV29CB Curved Gaming Monitor ("Product") includes a Three-Year Limited Hardware Warranty ("Warranty"). The Warranty covers product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and Canada only and is available only to original purchasers. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.This Warranty starts on the date of your purchase and lasts for three years (the "Warranty Period"). The Warranty Period is not extended if the Product is repaired or replaced. We may change the availability of this limited warranty at our discretion, but any changes will not be retroactive. Warranty services are provided by Viotek Warranty Pro ("WP"). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, WP will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to new in performance and reliability; or (2) exchange the Product with a new product or a refurbished one that is substantially equivalent to the original product. This Warranty is for one replacement only of like-items and does not cover items out of production if the product is no
14
longer made or stocked. This Warranty is not assignable or transferable. The original purchaser may call WP's toll-free number at 1-855-229-9472 for service requests. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes WP's property. This warranty only covers technical hardware defectiveness during the warranty period and under normal use conditions. WP does not warrant uninterrupted or error-free operation of this Product. This Warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any preventive maintenance; (e) modifications; (f) unauthorized repair; (g) normal wear and tear; (h) overclocking; or (i) external causes such as accidents, abuse, or other actions or events beyond our reasonable control.
Important: Do not disassemble the Product. Disassembling the Product will void this Warranty. Only WP or a party expressly authorized by WP should perform service on this Product.
DISCLAIMER OF WARRANTY: THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY.
DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RELATED INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
15
COPYRIGHT © 2020 VIOTEK. ALL RIGHTS RESERVED.
Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Windows)