RDX 2.4G RF Remote Control

Brief

The RDX series (RD1, RD2, RD3, RD4) comprises 2.4G RF remote controllers utilizing 2.4G wireless technology. These controllers feature low transmission power, low power consumption, long-distance transmission, strong anti-interference capabilities, and high transmission speed. They are suitable for various controllers and control requirements and can be paired with several controller models from the company, such as the SP630E, SP53XE series, and SP54XE series.

Features

• Wireless Freedom: Utilizes 2.4G wireless remote control technology, eliminating the need for physical connections and allowing users to operate freely.
• Long-Distance Control: Possesses long-distance transmission capabilities with a wide signal transmission range, enabling control without needing to be close to the device.
• Strong Anti-Interference: 2.4G RF technology offers robust anti-interference capabilities, ensuring signal stability and reliability.
• One-to-Many Control: A single remote controller can manage multiple controllers.
• Many-to-One Control: Each controller can be paired with multiple remote controllers (up to 5).
• Simple Operation: Functions such as binding, unbinding, and clearing are straightforward and user-friendly, requiring no complex settings.

RD1 Remote Control Instructions

The RD1 remote control is designed for basic lighting adjustments.

Button Functions:

• ON Button: Short press turns the light on. Long press (within 20 seconds of powering on the controller) binds or unbinds the remote control.
• OFF Button: Short press turns the light off. Long press (within 20 seconds of powering on the controller, after turning off the light completely) clears all paired remote controllers.
• Speed Control: Adjusts the speed of lighting effects.
• Mode Control: Cycles through different lighting modes.
• Music Mode: Adjusts music synchronization sensitivity or cycles through music modes.
• Brightness Control: Adjusts the overall brightness of the light.
• Brightness Presets: Specific brightness levels (15%, 25%, 50%, 60%, 75%, 100%).
• Timed Delay-Off: Sets a delay-off timer (1H, 2H, 3H).

Remote Layout Description: The RD1 remote features an ON button (top left) and an OFF button (top right). Below these are controls for Speed, Mode, Music, and Brightness. Further down are dedicated buttons for specific brightness percentages and timed delay-off functions.

RD2 Remote Control Instructions

The RD2 remote control adds color temperature adjustment capabilities.

Button Functions:

• ON Button: Short press turns the light on. Long press (within 20 seconds of powering on the controller) binds or unbinds the remote control.
• OFF Button: Short press turns the light off. Long press (within 20 seconds of powering on the controller, after turning off the light completely) clears all paired remote controllers.
• Speed Control: Adjusts the speed of lighting effects.
• Mode Control: Cycles through different lighting modes.
• Music Mode: Adjusts music synchronization sensitivity or cycles through music modes.
• Brightness Control: Adjusts the overall brightness of the light.
• Color Temperature Control: Adjusts the color temperature of the light.
• Color Temperature Presets: Selects specific color temperature presets (CW: Cold White, NW: Nature White, WW: Warm White).
• Timed Delay-Off: Sets a delay-off timer (1H, 2H, 3H).

Remote Layout Description: The RD2 remote includes ON and OFF buttons at the top. Below are controls for Speed, Mode, Music, and Brightness. It also features controls for Color Temperature and specific color temperature presets. Timed delay-off buttons are located at the bottom.

RD3 Remote Control Instructions

The RD3 remote control offers advanced color selection and effect cycling.

Button Functions:

• ON Button: Short press turns the light on. Long press (within 20 seconds of powering on the controller) binds or unbinds the remote control.
• OFF Button: Short press turns the light off. Long press (within 20 seconds of powering on the controller, after turning off the light completely) clears all paired remote controllers.
• Speed Control: Adjusts the speed of lighting effects.
• Timed Delay-Off: Sets a delay-off timer (1H, 2H).
• Effect Cycle: Cycles through various pre-programmed lighting effects.
• Mode Control: Cycles through different lighting modes.
• Music Mode: Adjusts music synchronization sensitivity or cycles through music modes.
• Brightness Control: Adjusts the overall brightness of the light.
• Color Hue/Cycle: Adjusts the color hue or cycles through colors.
• Color Selection: Selects specific colors (W: White, Y/C/P: Yellow/Cyan/Purple, R/G/B: Red/Green/Blue).

Remote Layout Description: The RD3 remote has ON and OFF buttons at the top. Below are controls for Speed, Timed delay-off, Effect Cycle, Mode, Music, and Brightness. It also features color adjustment controls and specific color selection buttons.

RD4 Remote Control Instructions

The RD4 remote control combines features of RD2 and RD3, including color temperature and advanced color selection.

Button Functions:

• ON Button: Short press turns the light on. Long press (within 20 seconds of powering on the controller) binds or unbinds the remote control.
• OFF Button: Short press turns the light off. Long press (within 20 seconds of powering on the controller, after turning off the light completely) clears all paired remote controllers.
• Speed Control: Adjusts the speed of lighting effects.
• Timed Delay-Off: Sets a delay-off timer (1H, 2H).
• Effect Cycle: Cycles through various pre-programmed lighting effects.
• Mode Control: Cycles through different lighting modes.
• Music Mode: Adjusts music synchronization sensitivity or cycles through music modes.
• Brightness Control: Adjusts the overall brightness of the light.
• Color Hue/Cycle: Adjusts the color hue or cycles through colors.
• Color Temperature Control: Adjusts the color temperature of the light.
• Color Selection: Selects specific color temperature presets (CW/NW/WW: Cold/Nature/Warm White) and colors (R/G/B: Red/Green/Blue).

Remote Layout Description: The RD4 remote features ON and OFF buttons at the top. Below are controls for Speed, Timed delay-off, Effect Cycle, Mode, Music, and Brightness. It also includes controls for Color and Color Temperature, along with specific color selection buttons.

Technical Parameters

Cautions

1. When selecting the remote control model, ensure it matches the correct controller model and type. Otherwise, remote control functions may be missing or unavailable.
2. If the remote control indicator light responds slowly or flashes erratically, replace the battery promptly. Do not use low-quality batteries.
3. Avoid using the remote control in humid, high-temperature, dusty, or high-pressure environments. Store it indoors in a dry, static-free environment.
4. Do not use the remote control in areas with extensive metal or strong electromagnetic interference, as it may significantly affect the remote control distance.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions, compliant with exposure requirements.