User Guide for SUPER BRIGHT LEDS models including: LDRF-RGBW6-MZ, MiBoxer WiFi Smart Multi Zone RGBW Controller
Important ead all instructions prior to installation operation. Pairing Procedure for MiBoxer Remotes Rev V2 04/20/2022 Earth City E[py, t. Louis, MO 8 - - superbrightleds.com
9W A19 MiLight RGB Tunable White LED Light Bulb - RF Remote Optional - Hubless - 60W Equivalent - 850 Lumens | Super Bright LEDs
MiBoxer Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel | Super Bright LEDs
Important: Read all instructions prior to installation / operation. Pairing Procedure for MiBoxer Remotes Supplemental Guide MiBoxer Remote Pairing 1. Ensure all connections are secure and that the connected LEDs turn on when powered. 2. Disconnect supply power by disconnecting the controller's connection to the power supply, unplugging the power supply, or simply by turning of the wall switch or breaker the connected to the power supply. 3. With supply power off, verify the remote is functional by pressing any button. The indicator in the middle of the color wheel should light up. If it does not, check battery orientation and charge state. 4. Determine which zone to pair the LEDs to and begin repeatedly pressing the `|' button for that zone, then reapply supply power. Continue repeatedly pressing the `|' button after you restore power to the controller until the connected LEDs begin to flash. MZ-RGB-REMOTE RGBCCT-MZ8-RF S- S+ M 1 4 23 5. Once the LEDs stop flashing, this indicates pairing has been successful and the remote is ready to use. Rev V2 04/20/2022 4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.comAdobe PDF Library 16.0.3 Adobe InDesign 17.0 (Windows)