Share on WhatsApp
Login • Instagram
Zerodrag: Made in India FPV Drone Gear – Flight Controller, ESC & ELRS
User Manual for ZERODRAG models including: RACE X Aurora Race X LED, RACE X, Aurora Race X LED, Race X LED, X LED
Zerodrag Aurora Race-X LED
File Info : application/pdf, 10 Pages, 7.60MB
DocumentDocumentAURORA RACE-X 1 USER MANUAL Version 1.0 Index Product Description Specifications In The Box Wiring a Multiple led pads on the flight controller b If only ONE LED pad on flight controller Configuration a Betaflight b INAV Contact 1. Product Description The ZERODRAG Aurora Race-X LEDs come with LEDs on 3 directions that will ensure that the skies will be illuminated from all directions. 2. Specifications The ZERODRAG Aurora Race-X LED Boards boasts the following specifications: Weight: 1.16g x 4 Dimension: 6.5mm x 40mm Input Voltage: 5V 2 3. In The Box 4 x ZERODRAG Aurora Race-X LEDs. 4 x Heat shrink tube. 12 x silicone cables 4. Wiring LEDs can be wired in two ways 4.a. Multiple led pads on the flight controller Connect each ZERODRAG Aurora Race-X led to a flight controller using The LED pad: Connect each Aurora Race-X DIn to each of the LED pads Connect Aurora Race-X 5V and GND pads to the 5V and ground pads of the flight controller. 4.b. If only ONE LED pad on flight controller Connect the ZERODRAG Aurora Race-X led to a flight controller using The LED pad: Connect the different Aurora Race-X DIn in parallel and the connect on the LED pad. Connect Aurora Race-X 5V in parrel and connect to 5V pad of Flight Controller. 3 Connect Aurora Race-X GND in parrel and connect to GND pad of Flight Controller. If you have a more led boards than the number of led pads on your flight controller, you can use method 4.b. 5. Configuration 5.a. Betaflight turn on expert mode 4 In the Betaflight Configurator, Enable the LED_STRIP in the Configuration Tab under the Other Features section as shown: 5 Save changes and reboot the flight controller by selecting the Save And Reboot in the bottom right corner. Click on the wire order mode, and select at least 12 cells 011 for Aurora Race-X. Exit wire order mode and select all LEDS, in LED Functions change from none to any feature you want and select the colour you like. 6 Save changes by selecting the Save button on the bottom right corner. 5.b. INAV In the INAV Configurator, Enable the Multi-color RGB LED strip support in the Configuration Tab under the Other Features section as shown: 7 Save changes and reboot the flight controller by selecting the Save And Reboot in the bottom right corner. Click on the wire order mode, and select at least 12 cells 011 for Aurora Race-X. 8 Exit wire order mode and select all LEDS, in LED Functions change from none to any feature you want and select the colour you like. Save changes by selecting the Save button on the bottom right corner. 9 6. Contact Website: https://zerodrag.in/ Instagram: https://www.instagram.com/zerodrag.in/ LinkedIn: https://www.linkedin.com/company/zerodrag/ WhatsApp: https://wa.me/9821734544 10