Owner's Manual for Harbor Freight Tools models including: 58836 Doyle Portable Chain Vise, 58836, Doyle Portable Chain Vise, Portable Chain Vise, Chain Vise
1 day ago — Owner's Manual & Safety Instructions. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance ...
File Info : application/pdf, 8 Pages, 874.55KB
DocumentDocumentOwner's Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 23g PORTABLE CHAIN VISE Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com 58836 When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2022 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Specifications Pipe Capacity 1/8 - 6 Important Safety Information 1. Unfold stand completely and secure 6. This product is not a toy. Do not allow stand firmly before attaching pipe. children to play with or near this item. Provide additional support for stand if attaching larger pipes. 7. Use as intended only. 8. Inspect before every use; do not use 2. Wear ANSI-approved safety goggles if parts are loose or damaged. and heavy-duty work gloves during use. 3. Keep work area clean and well lit. 9. Maintain product labels and nameplates. These carry 4. Keep bystanders out of important safety information. the area during use. If unreadable or missing, contact 5. Do not use when tired or when Harbor Freight Tools for a replacement. under the influence of alcohol, 10. Damage could occur to your vise and/or drugs or medication. workpiece if you overtighten the Handle. SAVE THESE INSTRUCTIONS. Functions Tool Holder Pipe Bender Jack Screw Handle Pipe Jaws Leg Chain Pipe Chain Tool Tray Page 2 For technical questions, please call 1-888-866-5797. Item 58836 Assembly Instructions 1. Attach Tray Support (3) to Tool Tray (12) with a Tray Pin (15). 2. Slide Clip (18) into ring groove of the Tray Pin, and clamp with pliers as shown. 5. Secure legs to the Base with Shoulder Bolt (26), Washer (28), and Nut (25). Tray Support (3) Shoulder Nut Bolt (25) Tray Pin (26) (15) Clip (18) 3. Attach Front Legs (22) to the opposite end of the Tool Tray with a Tray Pin (15) and Clip (18). Front Legs (22) Washer (28) 6. Install the Rear Leg (21) by sliding it through the Tray Support Sleeve and into the Base Assembly (follow step 5 to bolt leg in). Rear Leg (21) Tool Tray (12) 4. Turn the Base (13) upside-down and set on a flat, hard surface. Install the Front Leg posts into the two leg openings on the Jaw (2) side of the Base. Base (13) Item 58836 Jaw (2) For technical questions, please call 1-888-866-5797. Page 3 Before Use 1. Turn Pipe Stand right-side-up and extend legs fully. 2. Slide the Tray Support Sleeve up all the way and tighten Set Screw (27). Set Screw (27) Jack Screw Note: When handling larger pipes, the Jack Screw can be used to support a 1 stabilizing pipe from a ceiling I-beam. Use on a level, concrete floor with exposed steel I-beams overhead. 1. Position the pipe stand directly below an exposed steel I-beam with a flat mating surface (I-beam flange). 2. Insert a piece of 1 stabilizing pipe between the I-beam and the Jack Screw on the Pipe Stand. Operating Instructions 1. Place workpiece into Jaws. 2. Wrap Chain over workpiece and connect to Jaw (underneath pipe). CAUTION! Keep fingers away from Jaws while tightening Chain. 3. Push down on Tool Tray until it snaps into place. Stabilizing Pipe Jack Screw 3. Tighten the Jack Screw until stabilizing pipe is applying firm pressure on pipe stand against floor. 4. Test Pipe Stand stability before use. Note: Use additional support stands for long lengths of pipe. 3. Turn Handle clockwise to tighten Jaws against workpiece until it is held securely. Do not overtighten. 4. Turn Handle counterclockwise to open Jaws. Page 4 For technical questions, please call 1-888-866-5797. Item 58836 Maintenance 1. Inspect Chain and Jaw for wear or damage before each use. Replace as necessary. 2. Keep moving parts lubricated. Wipe off excess lubricant on Handle and Jaws. 3. Keep Jaws clean. Remove Jaws for cleaning by removing Screws. 4. Periodically, check and tighten mounting hardware. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175447630 when ordering. Item 58836 For technical questions, please call 1-888-866-5797. Page 5 Parts List and Diagram Parts List Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Description Wear Plate Jaw Tray Support Screw Screw Nut Locking Pin Spring Washer Spacer Leg Chain Chain Jack Screw Tool Tray Base Swivel Nut Qty 1 1 1 2 2 1 2 2 1 1 1 1 1 1 Part 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Description Tray Pin Roll Pin Handle Clip Friction Ring Roll Rear Leg Front Leg Chain Screw Foot Nut Shoulder Bolt Set Screw Washer Qty 3 1 1 3 1 1 1 2 1 3 3 3 1 3 Page 6 For technical questions, please call 1-888-866-5797. Item 58836 Diagram Item 58836 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 26677 Agoura Road · Calabasas, CA 91302 · 1-888-866-5797