Product Description
- Single-hole installation
- 1/2" ceramic headpart, 90°
- GROHE StarLight® finish
- GROHE EcoJoy® 5.7 l/min SpeedClean mousseur
Technical Specifications and Dimensions
Dimensions Diagram Description
The faucet has a total height of 134 mm. The base diameter is approximately 34 mm, with a flange diameter of 49 mm. The spout has a projection of 101 mm from the center and a maximum clearance of 20 mm. The connection thread is G1/2. The overall height is 85 mm, with the spout angled at 10°.
Flow Rate and Pressure Loss Curve
This section presents a pressure loss curve with a flow limiter. The x-axis represents flow rate (Q) in liters per minute (l/min), ranging from 0 to 12 l/min. The y-axis represents pressure in bar, ranging from 0 to 6 bar. Key data points indicate: At 1 l/min, pressure loss is approximately 0.5 bar. At 2 l/min, pressure loss is approximately 1.5 bar. At 3 l/min, pressure loss is approximately 3 bar. At 4 l/min, pressure loss is approximately 4.5 bar. At 5 l/min, pressure loss is approximately 5.5 bar. At 6 l/min, pressure loss is approximately 6 bar. The second graph shows specific l/min values corresponding to pressure in bar: 1 bar: 4.8 l/min 2 bar: 5.0 l/min 3 bar: 5.0 l/min 4 bar: 5.1 l/min 5 bar: 5.1 l/min 6 bar: 5.1 l/min
Spare Parts
- 1: Handle (Order No. 48060000)
- 1.1: Handle fixing (Order No. 45186000)
- 2: 1/2" Ceramic headpart (Order No. 45882000)
- 2.1: O-ring Ø18.2 x Ø1.7 (Order No. 0392400M)
- 3: Mousseur (Order No. 48159000)
- 4: 1/2" Connecting nut (Order No. 45000000)
- 5: 1/2" Union (Order No. 1290100M)
- 5.1: Seal Ø18.5 x Ø12 x 2 (Order No. 0138900M)
- 6: Union nut 1/2 x Ø14.5 (Order No. 1290200M)*
- * Special accessory
