Fisher & Paykel Integrated Tall Dishwasher Planning Guide
Models: DW60UT4I2 | DW60UT4HI2
Introduction
This comprehensive Planning Guide provides the framework and tools to achieve your desired design outcome with Fisher & Paykel appliances. It offers a range of conceptual, detailed, and dimensional product information to bring your ideas to life and create spaces that truly reflect your vision.
Contents
| Section | Page |
|---|---|
| CONCEPT DESIGN: Specification guide (DW60UT4I2, DW60UT4HI2) | 4 |
| DEVELOPED AND DETAILED DESIGN: Data Sheet | 7 |
| DEVELOPED AND DETAILED DESIGN: Design planning information | 8 |
| DEVELOPED AND DETAILED DESIGN: Installation Height | 9 |
| DEVELOPED AND DETAILED DESIGN: Recessed Handle | 10 |
Specification Guide
Overview
Designed for seamless integration into surrounding cabinetry, these Tall models offer generous internal space and flexible installation for varying bench heights. Flexible storage options and clever technologies ensure reliable wash performance.
Products
Integrated Dishwasher, 60cm, Tall, Sanitise
Models: DW60UT4I2, DW60UT4HI2
Note: Not all models are available in all markets.
Series & Style
Series 9, Integrated
Features
- Designed for seamless integration into cabinetry, installable under bench with a minimum height of 857mm.
- Tall height provides 637mm of usable space, accommodating plate sizes up to 325mm.
- Eight wash programs including specialty Auto, Eco, 60 Min, and Glassware cycles.
- Extra Dry, Sanitise, Half Load, and Intensive wash modifiers for enhanced options.
- Fan-assisted drying with automatic door opening at cycle end removes excess moisture for a dry finish.
- Innovative air curtain channels steam away from adjacent benchtops, protecting cabinetry.
- Fully flexible racking system, including height-adjustable middle basket, cup racks, foldable wine racks, full-width utensil tray, and cutlery basket.
- Features touch controls, a floor-light cycle status indicator, and interior LED lighting.
- Wi-Fi capability with SmartHQ™ app connectivity for remote control and notifications.
- Energy rating: B* Star energy.
- Quiet operation with a low decibel rating of 42dBA, B sound rating**.
* Subject to change. Final certification pending.
** Noise subject to change.
Product Dimensions
ISO VIEW: Illustrates the overall external dimensions of the dishwasher from an angled perspective. Key measurements include overall height (adjustable), overall width, overall depth, minimum open door depth, height and width of custom toe kick panel, depth of toe kick recess, and height/width of custom door panel.
PROFILE VIEW: A side view showing the depth of the unit, including the toe kick recess and the depth of the custom door panel.
| Dimension | Measurement (mm) |
|---|---|
| Overall height* | 857-917 |
| Overall width** | 597 |
| Overall depth | 554 |
| Minimum depth of open door | 673 |
| Height of custom toe kick panel***** | 65-200 |
| Minimum width of custom toe kick panel*** | 595 |
| Depth of toe kick recess | 45-120 |
| Minimum height of custom door panel | 714 |
| Minimum width of custom door panel | 595 |
| Depth of custom door panel | 16-25 |
| Height from floor to door panel base* | 65-200 |
* Depending on adjustment of levelling feet
** Excluding side seals
*** Continuous toe kick installations are recommended
**** The toekick might have to be notched, to accommodate the door swing
Cavity Dimensions: Standard Installation
ISO VIEW: Depicts the required opening in cabinetry for installation, showing minimum overall height, minimum overall width, and minimum overall depth of the cavity.
REAR VIEW: Shows the rear of the unit with the service outlet, indicating that hoses and cords can be routed to either side.
| Dimension | Measurement (mm) |
|---|---|
| Overall height* | 857-917 |
| Minimum overall width | 600 |
| Minimum overall depth of cavity** | 580 |
| Custom door panel weight | 4-9kg |
* Depending on adjustment of levelling feet
** Includes front panels
Plumbing and Electrical
ISO VIEW: Illustrates the connection points for water inlet (3/4" BSP connector with Aquastop) and electrical supply (220-240V, 50Hz, 10A, 3-prong grounding-type receptacle) at the rear of the unit. Service outlet at rear extends both sides, hoses and cords can be routed to either or both sides.
| Specification | Details |
|---|---|
| Model No. | DW60UT4I2, DW60UT4HI2 |
| Dimensions | H 857-917mm W 597mm D 554mm |
| Electrical Supply | 220-240 V, 50 Hz |
| Service | 10A |
| Receptacle | 3-prong grounding-type |
| Plumbing Supply | 3/4" (20mm) BSP connector water inlet hose with Aquastop |
| Pressure | Min 0.03 Mpa (4.35psi), Max 1 Mpa (145psi) Cold water connection @ 20°C |
Data Sheet - Product Dimensions & Clearances
PLAN VIEW: A top-down view showing the dishwasher's width and depth within its cavity, indicating clearances required from the cavity walls and adjacent cupboards. It also shows the position of the inner door datum and chassis datum.
FRONT VIEW: A frontal view detailing the height of the product, custom door panel dimensions, and the toe kick area.
PROFILE VIEW: A side view illustrating the depth of the unit, custom door panel, and toe kick recess, along with clearances.
Product Dimensions
| Dimension | Measurement (mm) |
|---|---|
| Overall height of product* | 857 - 917 |
| Overall width of product** | 597 |
| Overall depth of product (excl. custom panel and handle) | 554 |
| Height of chassis | 857 |
| Depth of chassis (excl. inner door) | 521 |
| Height of feet* | 0 - 60 |
| Depth of toe kick recess | 45 - 120 |
| Depth of inner door | 28 |
| Height from bottom of door to floor* | 65 - 200 |
| Minimum depth of open door | 673 |
| Minimum width of custom door panel | 595 |
| Height of custom door panel | 714 - 789 |
| Thickness custom door panel | 16 - 25 |
* Depending on adjustment of levelling feet
** Excluding side seals
Minimum Clearances
| Clearance Type | Measurement (mm) |
|---|---|
| Inside height of cavity* | 857 - 917 |
| Minimum inside width of cavity | 600 |
| Minimum overall depth of cavity | 580 |
| Minimum clearance to corner cupboard | 13 |
| Height of toe kick area* | 65 - 200 |
| Minimum clearance to adjacent cupboard door | 2 |
* Depending on adjustment of levelling feet
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16"). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com
Installation Height
Diagrams: Two side profile diagrams illustrate installation height configurations. The left diagram shows minimum height installation, detailing product height (feet at lowest), custom door panel height, bottom extension of the custom door panel, gap between the door panel and benchtop, depth of toe kick recess, and minimum toe kick height. The right diagram shows maximum height installation, detailing product height (feet fully extended), maximum cavity height with door panel extension, minimum custom door panel height, bottom and top extensions of the custom door panel, gap between the door panel and benchtop, depth of toe kick recess, and maximum toe kick height.
Minimum Height Installation
| Dimension | Measurement (mm) |
|---|---|
| Minimum overall height of product and cavity (feet at lowest) | 857 |
| Minimum height of custom door panel | 714 |
| Maximum extension bottom custom door panel | 75 |
| Minimum gap between door panel and bench top | 3 |
| Depth of toe kick recess | 45-120 |
| Minimum height toe kick | 65 |
Maximum Height Installation
| Dimension | Measurement (mm) |
|---|---|
| Maximum overall height of product (feet fully extended) | 917 |
| Maximum cavity height (with door panel extension) | 980 |
| Minimum height of custom door panel | 714 |
| Maximum extension bottom custom door panel | 75 |
| Maximum recommended extension top custom door panel | 60 |
| Minimum gap between door panel and bench top | 3 |
| Depth toe kick recess | 45-120 |
| Maximum height toe kick | 200 |
Note: If the cavity is taller than the dishwasher, install a shelf or substructure to ensure the dishwasher remains stable and does not tip over.
Recessed Handle
Diagram: A side profile diagram illustrating dimensions relevant to installing a recessed handle. It shows the product height, minimum cavity height, minimum custom door panel height, maximum custom door panel bottom extension, recommended sub-structure height, minimum clearance between the custom door panel and bench, height of the toe kick, depth of the toe kick, and minimum toe kick thickness.
| Dimension | Measurement (mm) |
|---|---|
| Height product | 857 - 917 |
| Minimum cavity height | 857 |
| Minimum height of custom door panel | 714 |
| Maximum custom door panel bottom extension | 75 |
| Recommended height sub-structure | 45 |
| Minimum recommended clearance between custom door panel and bench | 35 |
| Height toe kick | 65 - 200 |
| Depth toe kick | 45 - 120 |
| Mininmum toe kick thickness | 16 |
Luxury Home & Kitchen Appliances | Fisher & Paykel USA
Luxury Home & Kitchen Appliances | Fisher & Paykel USA
