Lithonia Lighting® | Best Value in Lighting
User Manual for LITHONIA LIGHTING models including: RAZ 9IN, RAZ 12IN, RAZ 18IN, RAZ 24IN, RAZ 9IN Rayzer Modular LED Lighting System, RAZ 9IN, Rayzer Modular LED Lighting System, Modular LED Lighting System, LED Lighting System, Lighting System
Rayzer™ LED Modular Lighting System INSTALLATION DIAGRAM Note: Fixture includes 1 3/8" end row connector, 18” linking cord, mounting clips for flush or 30º mounting, and screws.
File Info : application/pdf, 3 Pages, 2.25MB
DocumentDocumentFEATURES & SPECIFICATIONS INTENDED USE Provides task or accent lighting in commercial, retail, hospitality and residential applications. Ideal for use under and over cabinets, display cases, task lighting, office lighting, coves and utility/work areas. CONSTRUCTION Durable aluminum construction in a low-profile design. Frosted acrylic diffuser and continuous row of LEDs provides even illumination. ELECTRICAL Link up to 7.5' of modular system to one transformer (required, sold separately). Fixtures can be linked endto-end with the included end row connector (1-3/8" spacing) or 18" linking cord). 3", 24"and 121"connector cords may also be purchased separately for use between fixtures. Can be plugged in or direct-wired (splice box and 24" connector cord required for direct-wiring). OPTICS LEDs have a 50,000 hour L70 rated life. Provides a warm color temperature at 3000K, with 95 CRI. Dimmable when used with the optional step dimmer (sold separately). INSTALLATION All mounting hardware included. Mounting clips allow for quick & easy installation. Can be flush mounted or angled at 30° using the provided clips. All configurations tested to IES LM79 standards. LISTING UL listed to US and Canadian safety standards. WARRANTY 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Catalog Number Notes Type Indoor General Purpose RayzerTM Modular LED Lighting System ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: RAZ 12IN 30K 90CRI Series1,2 RAZ Rayzer low profile LED undercabinet Length 9IN 9" nominal 12IN 1' nominal 18IN 1.5' nominal 24IN 2' nominal Color temperature 30K 3000K CRI 90CRI >90 Finish (blank) Brushed nickel Accessories /Replacement Parts1,2 RAZTRANS24 120 24v transformer - 120v power source, includes 5' cord and plug and 24" connector cord (for linking to first fixture) RAZTRANS24 MVOLT 24v transformer - Multi-Volt power source, includes integrated directwire junction box and 24" connector cord (for linking to first fixture) RAZDIM Step dimmer with remote touch pad, 10' cord length on remote touchpad RAZ CC121 121"Linking cord (fixture to fixture) RAZ CC24 24"linking cord (fixture to fixture) RAZ CC3 3"linking cord (fixture to fixture) RAZLVCC Low voltage linking cord (cord to cord), to connect multiple linking cords RAZ ERC RAZ PHD RAZ INLS26 UCD JB UCD JB BL UC ERC24 End row connector (fixture to fixture, 1 3/8" fixture spacing, 1 connector per pack) Power hub distributor, allows for additional fixture run In-line power switch (transformer to linking cord, 26" cord length) Splice box - white (required for 120V direct wire) Splice box - black (required for 120V direct wire) 24" connector cord - white (required for 120V direct wire for splice box to transformer connection) Notes 1 Link up to 7.5' of modular system to one transformer. 2 Transformer is required for operation. DECORATIVE INDOOR RAZ RayzerTM LED Modular Lighting System SPECIFICATIONS 9" 12" 18" 24" Lumens (3000K): 324 434 630 958 Watts (3000K): 8 10 13.1 18.3 W Lumens per watt: 41 43 48 52 Length: 9-1/4 (23.5) 12-1/4 (31.1) 18-1/4 (46.4) 24-1/4 (61.6) L Width: 1-1/4 (3.18) 1-1/4 (3.18) 1-1/4 (3.18) 1-1/4 (3.18) Height: 1/2" (1.27) 1/2" (1.27) 1/2" (1.27) 1/2" (1.27) H All dimensions are inches (millimeters) unless otherwise indicated. Weights are pounds (kilograms). Full photometric data report available within 2 weeks from request. Consult factory. DECORATIVE INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com RAZ © 2010-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/07/22 RayzerTM LED Modular Lighting System INSTALLATION DIAGRAM Note: Fixture includes 1 3/8" end row connector, 18" linking cord, mounting clips for flush or 30º mounting, and screws. Plug In Standard Direct-Wire Optional Flush and 30º mounting clips are used with fixtures, power hub distributor and touch dimmer. Power Hub Distributor (optional) Allows for versatile wiring 6' power cord included with transformer 24 Volt Transformer (required, sold separately) Includes 6' power cord for plug in installation and 24" linking cord to connect thetransformer to the first stick Splice Box and 24" Connector Cord (optional) Required for direct-wire installation Link up to 7.5' of fixtures (not including linking cords) In-Line Power Switch (optional) Connects the transformer to the linking cord Splice Box: UCD JB (white) UCD JB BL (black) 24" Connector Cord: UC ERC24 R12 (white) UC ERC24 BL (black) 18" Linking Cord (included) Use to link around corners or for wider spacing between fixtures 121" and 24" Linking Cord Available (optional) End Row Connector (optional) Use to link fixtures end-to-end Step Dimmer (optional) 3"Linking Cord - Fixture-to-Fixture (optional) Use to link fixtures around corners or for wider spacing between fixtures 3" Linking Cord - Cord-to-Cord (optional) Use to connect 2 linking cords DECORATIVE INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com RAZ © 2010-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/07/22