CELINA, SELINA, GALAXY LED Ceiling Lights
This document provides product information and installation guidelines for the CELINA, SELINA, and GALAXY series of LED ceiling lights.
CELINA Series LED Ceiling Lights
| Model | Diameter | Height | Voltage | Lumens | Wattage | Color Temp. | CRI | Beam Angle | Lifespan | IP Rating | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XDDL32WW / XDDL32RSWW | Ø320 mm | 90 mm | 220-240V (50/60Hz) | 1200 lm | 17W | 3000K | Ra ≥80 | 115° | 25000h | IP44 | Motion Sensor (selected models) |
| XDDL38WW / XDDL38RSWW | Ø380 mm | 105 mm | 220-240V (50/60Hz) | 1500 lm | 22W | 3000K | Ra ≥80 | 115° | 25000h | IP44 | Motion Sensor (selected models) |
| XDDL26WW / XDDL26RSWW | Ø260 mm | 85 mm | 220-240V (50/60Hz) | 800 lm | 12W | 3000K | Ra ≥80 | 115° | 25000h | IP44 | Motion Sensor (selected models) |
SELINA & GALAXY Series LED Ceiling Lights
| Model | Diameter | Height | Voltage | Lumens | Wattage | Color Temp. | CRI | Beam Angle | Lifespan | IP Rating | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SELINA 17 / GALAXY 17 | Ø330 mm | 105 mm | 220-240V (50/60Hz) | 1300 lm | 17W | 4000K | Ra ≥80 | 115° | 25000h | IP44 | Motion Sensor (selected models) |
| SELINA 12 / GALAXY 12 | Ø265 mm | 80 mm | 220-240V (50/60Hz) | 900 lm | 12W | 4000K | Ra ≥80 | 115° | 25000h | IP44 | Motion Sensor (selected models) |
General Information
Intended Use
The product is designed for household and general use, suitable for indoor applications.
Mounting Instructions
Technical changes are reserved. Read the manual before mounting. Installation should be performed by a qualified person. All operations must be carried out with the power supply disconnected. Exercise particular caution. The product has a protective terminal; failure to connect the protective lead may lead to electric shock. Ensure proper mechanical fastening and electrical connection before first use. The product can be connected to a supply network that meets legally defined energy quality standards.
Diagram Description: The diagrams illustrate a 5-step mounting process, including wiring and securing the fixture. It is crucial to connect the protective wire correctly; incorrect mounting, such as omitting the protective wire, poses a risk of electric shock.
Functional Characteristics
This product is for indoor use only. It automatically switches the light on and off based on the detection of moving objects (this feature applies to selected models).
Diagram Description: The motion sensor operates in low light conditions (below 10 lux). It detects motion within an approximate range of 3.5 meters and a 120° angle. The light remains on for approximately 30 seconds after the last detected motion.
Usage Guidelines & Maintenance
Perform maintenance only when the power supply is disconnected and the product has cooled down. Clean the product exclusively with soft and dry cloths. Do not use chemical cleaning agents. Do not cover the product; ensure free air access. The product may heat up to elevated temperatures. The light source is a non-replaceable LED type; the product cannot be repaired if the light source is damaged. Attention: Do not stare directly into the LED light beam. Power the product only with the rated voltage or within the specified voltage range. Do not use the product without or with a cracked protective glass. Avoid using the product in environments with unfavorable conditions such as dust, water, moisture, vibrations, explosive atmospheres, chemical fumes, or vapors. Moving objects (e.g., vehicles) may cause accidental activation of the sensor. Strong electromagnetic interference may disrupt the product's operation.
Environmental Protection
Please take care of cleanliness and the environment. Segregation of packaging waste is recommended. Products marked with the WEEE symbol (a crossed-out wheeled bin) must not be disposed of with regular household waste, under penalty of a fine. These products may be harmful to the environment and human health and require special treatment, recovery, recycling, or disposal. Such marked products must be returned to a collection point for waste electrical and electronic equipment. Information on collection points is provided by local authorities or sellers of such equipment. Used equipment can also be returned to the seller when purchasing new products of the same type, in a quantity no greater than the new purchase. These regulations apply within the European Union. For other countries, applicable legal regulations must be followed. Contacting the local distributor is recommended.
Notes & Warnings
Failure to comply with the recommendations in this manual may result in fire, burns, electric shock, physical injury, and other material and non-material damages.
Manufacturer Information
Sanico Electronics Polska Sp. z o.o.
ul. Okólna 45, 05-270 Marki
sanico@sanico.com.pl
www.sanico.com.pl
RoHS compliance.