EAW: Eastern Acoustic Works | High-performance, professional loudspeaker system design and manufacturer
Owner's Manual for EAW models including: AC6, AC6 2-Way Full Range ADAPTive Column Loudspeaker, 2-Way Full Range ADAPTive Column Loudspeaker, Full Range ADAPTive Column Loudspeaker, ADAPTive Column Loudspeaker, Column Loudspeaker, Loudspeaker
EAW AC6 Powered 6x6" Adaptive Column Loudspeaker - Black
EAW AC6 - ePRODANCE.cz
EAW ADAPTive Series Professional Audio Solutions - Sales & Distribution | Heliart OÜ
File Info : application/pdf, 5 Pages, 1.16MB
DocumentDocumentAC6 2-Way Full Range ADAPTive Column Adaptive PerformanceTM manages coverage and directivity via ResolutionTM 2 software Suitable for outdoor installation when input/output weather protection covers are used Proven EAW acoustical design and DSP including FocusingTM and DynOTM provides a pristine impulse response at all output levels. Integrated DanteTM redundant networking including Analog redundancy capability. On-board diagnostics and Adaptive Healing continuously monitor and correct performance in real time OVERVIEW AC6 brings the highly sought-after ADAPTive tool kit to a column loudspeaker. In the same fashion as Anya and Anna speaker enclosures, AC6 offers all of the benefits of ADAPTive performance in a pillar enclosure. AC6's 120° horizontal dispersion further extends the capabilities of ADAPTive Systems offering a dramatically smaller product in the ADAPTive family. An infinite amount columns of AC can be flown as mains in a wide variety of applications or integrate AC with the larger Anya and Anna modules within the same venue for endless coverage possibilities. TECHNOLOGIES ADAPTive PerformanceTM Adaptive Performance integrates nearly every aspect of a loudspeaker mechanical, electrical and acoustical design to one end: ideal three-dimensional coverage of every venue, every time. Concentric Summation Array (CSA) TM A method of seamlessly integrating MF and HF components within a single horn. With CSA, multiple subsystems sum coherently, without interruption to either HF or MF wavefronts. Beamwidth Matched Crossovers Introduced over a decade ago for our MK series loudspeakers, EAW Engineers use carefully-designed HF horns and crossovers to eliminate polar irregularities through the crossover point. FocusingTM Use of advanced digital signal processing to perfect the impulse response of a loudspeaker in the time domain. Eliminating horn "honk" and splashiness, this makes the loudspeaker sound like a studio monitor instead of a "PA" speaker. DynOTM Dynamic Optimization actively tracks input spectrum and power delivery, continually wicked maximizing output and fidelity at any drive level. One Main Street | Whitinsville, MA 01588 | Tel 800 992 5013 / 508 234 6158 | www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. ©2019 Eastern Acoustics Works AC6 PHYSICAL Color Material Dimensions (H×W×D)* Net Weight* Shipping Weight* Black or White Aluminum Housing with Stainless Steel Grille 38.7 x 9.4 x 10.4in (983 x 239 x 264mm) 70lbs (32kg) 85lbs (36kg) ORDERING DATA Part Numbers: AC6 Accessories EAW AC6 WALL BRACKET BLACK EAW AC6 WALL BRACKET WHITE EAW AC6 FLUSH MOUNT BRACKET EAW AC6 FLUSH MOUNT BRACKET EAW AC6 CONNECTING PLATES EAW AC6 SUBWOOFER STACK EAW AC6 STINGER KIT EAW AC6 MOHAWK KIT EAW AC6 POLE CUP KIT EAW AC6 2X HANDLE KIT Black 2070185-90 2071359-90 2071372-90 2071383-90 2071637-90 2072137-90 2072137-90 2072166-90 2072165-90 2072034-90 2072046-90 TECHNICAL SPECIFICATIONS 2-WAY FULL RANGE ADAPTIVE COLUMN PERFORMANCE Max SPL (Peak 1m), unadapted1 Operating Range2 (-10db) Nominal Beamwidth3 C O N F I G U R AT I O N LF Transducer, Loading HF Transducer, Loading Operating Mode Amplifier Channels Signal Processing ELECTRICAL Input Type Max Input Level Impedance Wiring Dry Contact Interface Voltage Power Draw Input & Loop Type Amplifier Type Amplifier Max Output LF / HF (Peak) Driver Protection AC Mains (nominal) 143dB 65Hz 20kHz 120 ° Horizontal x Adaptive Vertical 6 x 6 in cone, 1.7 in voice coil vented (w/ CSA) 30 x 19mm dome tweeter, horn loaded 6 x LF, 30 x HF DSP with EAW FocusingTM and Adaptive PerformanceTM Electronically Balanced 25dBu 20kOhm (balanced) 2x XLRF, Pin 1 chassis, pin 2+, pin 32x Separate Loop through XLRM (for analog signal only) Input overide, preset recall, fault status Separate loop through & 6x pass through pins 5V nominal, 12V maximum 600W Analog/AES/Dante® Class D 6 x 150W LF 30 x 75W HF Integral DSP Limiting Connector Neutrik PowerCON® True1 Top Input 100V to 240V Frequency 50Hz to 60Hz POWER CONSUMPTION Full 600W 1/3rd 1/8th Idle 1 Calculated max SPL at 1m with 4:1 (12dB) crest factor pink noise. Specified as whole space (free field) for full range loudspeakers, half space for subwoofers. 2 Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted. 3 Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level. 2 Tel 800 992 5013 / +1 508 234 6158 | www.eaw.com AC6 SIGNAL DIAGRAM 3 Tel 800 992 5013 / +1 508 234 6158 | www.eaw.com AC6 4 Tel 800 992 5013 / +1 508 234 6158 | www.eaw.com AC6 Phase Linearity PERFORMANCE GRAPHS Beamwidth (Unadapted)1 =Horizontal =Vertical Frequency Response2 =LF Processed =HF Processed =Overall Processed 10 0 -10 -20 -30 -40 -50 10 100 1000 10000 1 Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method means the output may drop below -6 dB SPL within the beamwidth angle. 2 Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m. One Main Street Whitinsville, MA 01588 Tel 800 992 5013 / +1 508 234 6158 5 www.eaw.com