LEYTON Motorised Pop-Up Socket

Key Features (Continued)

• Anti-pinch function: If the unit is obstructed during a closing operation, the anti-pinch function reverses the direction of travel momentarily and then pauses all movement. The operation LED flashes red to indicate activation. Pressing the button on top again will fully raise the unit and return it to normal operation.
• Anti-collision function: If the unit encounters an obstruction during a raise operation, the anti-collision function activates, and the unit pauses. The indicator LED flashes yellow to signal activation. Once the obstruction is cleared, pressing the button on top once will return the unit to normal operation.
• One-key design: This item is designed for simplicity and ease of use, with all operations controlled by a single button on the top of the unit.
• Water-resistant design: In its closed state, this product is designed to prevent water ingress from spillages, stopping them from entering the product body and potentially leaking into the mains sockets.
• USB charging: The unit is equipped with 1 x USB charging socket and 1 x Type C charging socket, allowing portable devices to be charged conveniently from your worktop.

Wireless Charger Function:

• The mobile phone must support the wireless charging function.
• When the product is powered on, placing a mobile phone on the top cover will initiate automatic charging.

Unpacking

Remove contents from the packaging and lay them out on a cardboard or other protective surface to avoid damage. Check that the contents are correct and free from damage before proceeding. If any parts are missing or damaged, please contact your supplier.

Safety Information

Install and use this product with care. Please read this instruction booklet thoroughly before installation and carefully follow all instructions. Do not use this product for any purpose or in any configuration not explicitly specified in this instruction manual. Leyton disclaims any and all liability for injury or damage arising from incorrect assembly, mounting, or usage of this product.

Caution

This motorized pop-up socket must be securely installed on a solid horizontal surface.

Installation Diagram Description

The diagram illustrates the components and installation process. Key elements are:

• 1. Product Body: The main unit containing the socket mechanisms and ports.
• 2. Silicone pad: A component used for sealing or fitting.
• 3. Worktop: The surface into which the socket is installed.
• 4. Locking Ring: A component used to secure the product body within the worktop.

The diagram shows the product body being inserted into a hole in the worktop and secured with a locking ring.

Installation Instructions

1. Use a suitable hole cutter to make a 95mm hole in the worktop (3).
2. Fix the silicone pad (2) onto the product body (1).
3. Insert the product body (1) into the 95mm hole in the worktop (3). Rotate the locking ring securing tightly to the top.
4. Connect the supplied power lead to the connector on the base of the product body (1).

Key Features

• Accidental Operation Protection: This product is fitted with an automatic delay timer to prevent accidental operation. Press the button on the top of the unit for 2 seconds to enable the motorized raise/lower function. This function is designed to protect both children and animals.

LED Light Design:

• Dim Green (static): The unit is in a lowered position and ready to be used.
• Bright Blue (flashing): A raise operation is currently in progress.
• Dim Blue (flashing): The unit has been paused during a raise operation.
• Dim Blue (static): The unit is fully raised and ready for use.
• Bright Green (flashing): A lowering operation is currently in progress.
• Dim Green (flashing): The unit has been paused during a lowering operation.
• Yellow (flashing): The anti-collision function has activated during a raise operation.
• Red (flashing): The anti-pinch function has activated during a lowering operation.

Specifications