UBTECH uCode Quick Start Guide

Software Introduction, Download, and Installation

uCode is a software and hardware combination programming client developed by UBTECH for programming education. Students can create animations by dragging and dropping blocks without using a keyboard. It can also program UBTECH hardware products and realize virtual reality control through joint programming of software and hardware.

Download link: https://ucode.ubtrobot.com/

Introduction of Product Modules

The uCode robot system consists of several key modules:

• UGOT Main Controller: The central processing unit of the robot.
• Battery Box: Houses the power source for the robot.
• Servo and Gear Motor: Provide movement and articulation.
• Gripper: Allows the robot to grasp objects.
• Sensors: Enable the robot to perceive its environment (e.g., Camera Module, TOF Module).
• McNumm Wheel and Rubber Wheel: For locomotion.
• Wire: Various types of wires for connections, including UBT designed wires and a USB-C cable.

Model Assembly, Disassembly, Connections, and Power On

This section details the assembly and connection of the robot's components:

1. Instruction of Servo and Gear Motor: Diagrams showing how to connect motors.
2. Instruction of Sensors: Diagrams illustrating sensor connections.
3. Instruction of Battery: Guidance on battery installation and handling.
4. Instruction of UBT Designed Wire: Explains the use of specialized UBTECH wires for connections.

Power On: Ensure all components are correctly connected before powering on the device.

Download and Running

This section guides users through the process of editing and downloading programs to the UGOT main controller:

• User's program edit and download: Use the uCode software to create programs.
• Connection: Connect the PC and UGOT main controller using the provided USB-C wire.
• Execution: The UGOT robot will execute the downloaded program automatically.

Specification

FCC Compliance

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Cautions

• Do not connect UBT designed interface to PC's USB-C, or the robot/PC will be damaged.
• Use the adapter that came with the robot; otherwise, the battery could be damaged. Only data transmission is supported via the main controller's USB-C port.
• Please charge the robot in time. If the robot is in low battery, please charge it. Ensure charging once every 2-3 months if not in use for a long time.
• Each port supports up to 4 heavy loads or motors in total, depending on the actual power consumption.
• Windows 10 is recommended for the online voice function of the main controller.
• Disconnect the robot from the transformer before cleaning.

A WARNING!

• The packaging must be retained as it contains important information.
• The battery charger used with the product is to be regularly examined for damage to the cord, plug, enclosure, and other parts. If any such damage occurs, the product must not be used until the damage has been repaired.
• The product must be used with the recommended battery (Li-ion type rechargeable battery, rated DC 7.4V).
• The product is not to be used with more than one power supply.
• The battery is to be mounted with the correct polarity.
• The supply terminals, battery terminals, and connectors must not be short-circuited.
• Never connect motors in total.
• Do not operate the product during charging.
• Choking hazard - small parts inside. Not suitable for children under three years.
• The product must only be used with the recommended transformer (rated output DC 19V, 1A). The transformer is not a toy.

Warranty Card

Please read this Warranty Card carefully and comply with the following clauses. Please keep the warranty card in a safe place. This warranty card should be provided with your request for repair or service.

Warranty Policy: If there are any problems with this product within the warranty period, UBTECH will offer free repair services. Consumables are not covered by this warranty.

Beyond Warranty Range: Product damage due to the following reasons is beyond the scope of warranty protections:

• Intended or accidental damage.
• Damage resulted from unauthorized unsealing of the product.
• Aging, collision, or scratching of the product shell.
• Product damage due to improper use or failure to follow instructions in the User Manual.

Paid Maintenance: After the warranty period, UBTECH offers paid maintenance services.

Note: Pictures are for reference only. Please refer to the actual product. Warranty protections are in addition to rights provided under local consumer laws and may vary between regions.

Contact Information:

• Official Customer Service Email: aftersales@ubtrobot.com
• UBTECH Public Account for Educational Products
• Add: Room 2201, Building C1, Nanshan Smart Park, No. 1001, Xueyuan Avenue, Nanshan District, Shenzhen, P.R.China
• Web: www.ubtrobot.com

Scan the QR code to get the electronic quick guide.

FC CE ℷ ⚠