Fitness Reality AB Hyper Bench

Important Information

Read all instructions carefully before using this product. Retain this owner's manual for future reference. The specifications of this product may vary from the photo and are subject to change without notice.

Model Number: 2860Q.1-100919

Service and Support

DO NOT RETURN THIS PRODUCT TO THE STORE.

For questions regarding assembly or proper operation of the machine, please contact customer service.

Email: Service@paradigmhw.com

Phone: 1-844-641-7920

Hours: 8:00 am to 5:00 pm (PST), Monday thru Friday

When requesting service, please have the following information ready:

• Your name
• Phone number
• Model number
• Serial number
• Part number
• Proof of Purchase

Mailing Address for Service:

Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA

Product Safety

WARNING: Before using this equipment, consult with your personal physician to see if the AB Hyper Bench is appropriate for you. Do not use this equipment without your physician's approval. Do not use this equipment if you have any of the following conditions or ailments:

• Extreme obesity
• Glaucoma, retinal detachment or conjunctivitis
• Pregnancy
• Spinal injury, Cerebral Sclerosis, or acutely swollen joints
• Middle ear infection
• High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
• Heart or circulatory disorders for which you are being treated
• A hiatus hernia or a ventral hernia
• Bone weaknesses including Osteoporosis, Unhealed fractures, Modularly pins, or Surgically implanted orthopedic supports
• Use of anticoagulants including Aspirin in high doses

The Maximum Weight Capacity for this product is 650lbs/295kgs.

Read all instructions carefully before assembling or operating this product. Retain this owner's manual, do not remove any safety labels from the machine, and keep the original purchase receipt for future reference.

General Safety Instructions:

1. Consult your physician or other health care professionals before using the Bench.
2. Always wear proper exercise apparel when using this equipment. Use care when getting on or off the unit.
3. If you feel faint, light-headed, or dizzy while operating the equipment, stop exercising immediately and contact your physician. Stop exercising if you experience pain or discomfort.
4. Keep children and pets away from this equipment at all times.
5. Only one person should use this equipment at a time.
6. Ensure your equipment is correctly assembled before use. Be sure all screws, nuts, and bolts are tightened prior to use.
7. Do not operate this or any exercise equipment if it is damaged.
8. Wait 2 hours after eating before using this exercise equipment. If you feel nauseous, stop exercising.
9. Always use this equipment on a clear and level surface. Do not use outdoors or near water.
10. Keep hands and feet away from any moving parts. Do not insert any object into any openings.
11. Keep loose clothes, jewelry, limbs, and long hair away from moving parts.
12. Children under the age of 12 should not use this fitness equipment.

Assembly Preparation

Warning: Assistance is highly recommended during assembly.

Tools for Assembly:

• Metric Allen Key Set
• Metric Wrench Set and Adjustable Wrench
• Flat Screwdrivers
• Phillips Screwdrivers
• Rubber Mallet
• Silicone Spray Oil

Assembly Steps:

• Insert bolts into the frame as illustrated in the drawings.
• Hand-tighten bolts, nuts, and screws during assembly for easier alignment. Tighten all hardware once the unit is completely assembled.
• It is highly recommended that a professional installer assembles the equipment. However, with proper assistance, the right tools, and by strictly following the assembly steps, assembly can be achieved without professional help.
• Read each step thoroughly before proceeding.
• Hardware (bolts, nuts, washers, etc.) has been presorted according to corresponding steps. Each bag of hardware is labeled with its corresponding step number.
• After assembly, check all functions for correct operation. Consult the manual or contact the service department if you experience any issues.

Assembly Steps

Step 1:

Slide the Rear Support Tube (B) through the bracket of the Backrest Support Tube (A). Fasten using:

• 1 - (6) Hex Bolt M10x1.5x80L
• 2 - (51) Flat Washer D20xD11x2T
• 1 - (75) Nylon Nut M10x1.5x10T

Align the adjustment holes on the Backrest Support Tube (A) with the Rear Support Tube (B) and lock into place using:

• 1 - (100) Pin D9.4x70

Thoroughly tighten the hardware once complete.

Step 2:

Insert the Rear Support Tube (B) into the bracket of the Front Support Tube (D) by aligning the holes and fasten using:

• 2 - (5) Hex Bolt M10x1.5x75L
• 4 - (51) Flat Washer D20xD11x2T
• 2 - (75) Nylon Nut M10x1.5x10T

Thoroughly tighten the hardware once complete.

Step 3:

Fasten the Swing Tube (E) to the underside of the Front Support Tube (D) using:

• 1 - (6) Hex Bolt M10x1.5x80L
• 2 - (51) Flat Washer D20xD11x2T
• 1 - (75) Nylon Nut M10x1.5x10T

Align the Swing Tube (E) to the adjustment holes on the front of the Front Support Tube (D) and lock into place using:

• 1 - (100) Pin D9.4x70

Thoroughly tighten the hardware once complete.

Step 4:

Insert Handle Grip Tube (C) into the square shaft of the Front Support Tube (D). Lock into place using the Ball Knob (102) located on the underside of the Front Support Tube (D).

Mount the Foam Roller (222) with the Foam Rollers Sleeves (223) onto the posts of the Swing Bar (E). Lock the Foam Rollers (222) into place by inserting Round Cap (120) into the post holes of the Swing Tube (E) using:

• 2 - (222) Foam Rollers D23xD100x200L
• 2 - (223) Foam Roller Sleeve (ALREADY INSTALLED ON PART 222)
• 2 - (120) Round Cap D25.4xD65x31.5

Step 5:

Attach both Support Pads (G) to Handle Grip Tube (C) using:

• 4 - (3) Hex Bolt M8x1.25x25L
• 4 - (50) Flat Washer D18xD8.5x1.2T
• 4 - (54) Spring Washer D15.4xD8.2x2T

Note: Loosely install all hardware by hand before tightening with tools to make aligning holes easier. Thoroughly tighten the hardware once complete.

Step 6:

Attach both Backrest Pad (F) to Backrest Support Tube (A) using:

• 4 - (3) Hex Bolt M8x1.25x25L
• 4 - (50) Flat Washer D18xD8.5x1.2T
• 4 - (54) Spring Washer D15.4xD8.2x2T

Note: Loosely install all hardware by hand before tightening with tools to make aligning holes easier. Thoroughly tighten the hardware once complete.

Adjustments

1. Swing Tube Adjustment: Raise or lower the Swing Tube (E) to the desired position. Align the adjustment holes and secure with the Pin (100) before using the AB Hyper Bench.
2. Support Pad Adjustment: Raise or lower the Support Pads (G) to the desired position. After the Ball Knob (102) pins into an adjustment hole, tighten the Ball Knob (102) to secure the Support Pads (G).
3. Backrest Adjustment: Raise or lower the Backrest (F) to the desired position. Align the adjustment holes of the Backrest Support Tube (A) with the holes of the Rear Support Tube (B), and secure the two parts with the Pin (100) before using the AB Hyper Bench.
4. Transporting the Bench: Grab and hold the Front Support Tube (D). Carefully lift the Front Support Tube (D) until the wheels on the Rear Support Tube (B) make contact with the ground.

Warranty

Manufacturer's Limited Warranty

Paradigm Health & Wellness guarantees the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm's Owner's Manual.

Component Warranty Length:

Exclusions from Warranty Coverage:

Paradigm does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any product failure, product malfunction, or damages attributable to:

• Improper installation and/or failure to abide by Paradigm's installation guidelines;
• Use of this product beyond normal home use, or in an application for which it was not designed.
• All exchanged parts and Products replaced under this limited warranty will become the property of Paradigm Health and Wellness.
• Damage caused by vandalism, accidents, inadequate maintenance, or by animals.
• Any act of Nature (such as fire, flooding, snow, ice, hurricane, earthquake, lightning or other natural disaster), environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt, grease, oil, etc.).
• Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to, among other things, flake, rust, accumulate dirt or stains.
• Improper operation, alteration, handling, storage, abuse or neglect of the product.

Paradigm, using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use. Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product's warranty. This warranty is offered only to the original purchaser and is not transferable. Proof of original purchase is required.

Ordering Replacement Parts:

Replacement parts can be ordered by emailing our customer service department: Service@paradigmhw.com

Open Monday thru Friday 8:00 AM - 5:00 PM (PST).

When ordering replacement parts, please have the following information ready:

1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase

Part Request Form

Paradigm Health & Wellness, Inc.

EMAIL THIS FORM WITH YOUR RECEIPT OF PURCHASE TO: Service@paradigmhw.com

"YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS"

*This form can also be faxed to #: 626-810-2166