Fellowes PS70-2 Paper Shredder Personal User Manual

User Manual for Fellowes models including: PS70-2 Paper Shredder Personal, PS70-2, Paper Shredder Personal, Shredder Personal, Personal

FELLOWES PS70-2 (01) PDF MANUAL - MANUAL-HUB.COM

File Info : application/pdf, 6 Pages, 775.15KB

FELLOWES PS70-2 (01)

PAPER SHREDDER Personal Series
DESTRUCTEUR DE DOCUMENTS Série usage personnel
DESTRUCTORA DE DOCUMENTOS Serie de uso personal
MODELS / MODÈLES / MODELOS
PS70-2, PS80C-2
USE AND CARE M ANUAL M ANUEL D' EM PLOI ET D' ENTRETIEN M ODO DE EM PLEO Y DE CUIDADO
PLEASE READ AND SAVE THIS M ANUAL WITH YOUR ORIGINAL RECEIPT Customer Service: 1-800-955-0959
VEUILLEZ LIRE CE M ANUEL ET LE CONSERVER AVEC LE TALON D'ACHAT Service clientèle (Canada) : 1-800-665-4339
POR FAVOR, LEA Y GUARDE ESTE M ANUAL CON EL RECIBO ORIGINAL Dpto. de Atención al Cliente: 1-800-955-0959
https://manual-hub.com/

PRODUCT USAGE GUIDE
Sheet capacity* : Shred type: Shred size: Entry width: Recommended use: Maximum running time:

PS7 0 - 2

PS8 0 C- 2

Strip

Conf et t i

5/ 32"

5/ 32" x 4/ 5"

50-100 shredding passes per day

15-20 min. on / 25 minutes off

*Sheet capacity measured with 20 lb., 8-1/ 2" x 11" paper with the shredder operating at rated voltage. Different paper weights, humidity, and electrical currents will affect capacity.

CARACTÉRISTIQUES
Capacité de destruction (feuilles)* : Type des déchets : Dimension des déchets : Largeur d'entrée : Emploi recommandé : Cycles d'utilisation conseillés :

PS7 0 - 2

PS8 0 C- 2

Bandes

Fragments

3.9 mm

3.9 x 20 mm

230 mm

50 à 100 passages de feuilles par jour

15 à 20 minutes marche / 25 minutes arrêt

*Capacité de destruction mesurée pour du papier 20 lb 8-1/ 2x11" (A4/ 70gsm), le destructeur fonctionnant sur tension nominale. Les différents grammages du papier, l'humidité et la tension affecteront la capacité.

CARACTERÍSTICAS
Capacidad de destrucción (hojas)* : Tipo de corte: Dimensión de corte: Ancho de entrada: Uso recomendado: Tiempo máx. de funcionamiento:

PS7 0 - 2

PS8 0 C- 2

Tiras

Conf et i

5/ 32" (3.9 mm)

5/ 32" x 4/ 5" (3.9 x 20 mm)

9" (230 mm)

de 50 a 100 pasadas diarias por la destructora

15-20 min. encendido / 25 min. apagado

*La capacidad de destrucción se calculó con hojas de 20 lb. 8-1/ 2" x 11" (A4/ 70gsm), con la destructora funcionando al voltaje nominal. Cambiando el peso del papel, la humedad y el voltaje se afecta tal capacidad.

https://manual-hub.com/

IM PORTANT SAFEGUARDS

PARTS OF THE SHREDDER

WARNING
· NEVER insert hands or fingers into paper entry as serious personal injury may result.
· THIS MACHINE IS NOT A TOY. Keep children and pets away from shredder AT ALL TIMES as serious injury may result. Always unplug shredder when not in use.
· Keep loose objects (jewelry, ties, long hair) away from shredder. These items and others like them may cause serious injury if they accidentally fall into the paper entry.
CAUTION

C B
A

D E
F G

· Confetti cut shredders contain sharp edges on the underside of the machine. Use caution when positioning the shredder head onto the bask et .
· Do not exceed recommended sheet capacity. · Do not shred plastic (except credit cards), continuous forms, adhe-
sive labels, transparencies, newsprint, or cardboard. · This personal shredder is intended for paper only. Do not attempt
to shred large paper clips or other hard materials (except staples and small paper clips). · Do not place shredder near or over a heat source or water. · Always turn off and unplug unit before moving or cleaning and when not in use. · Do not insert aerosol cleaners into or around the shredder. Some agents may combust, causing serious injury. · Never use flammable synthetic oil, petroleum- based or aerosol lubricants to oil the cutting blades. Some agents may combust,
causing serious injury. Use only a recommended oil in a nonaerosol container. See " MAINTENANCE."
· Do not use this product if it or the cord has been damaged in any way.
· Do not open the cover for any reason. Doing so can expose you to dangerous voltages and will void your warranty.
Pow er Cord Care
· Place power cord in an easily accessible position, because it is the main disconnect switch.
· Do not place machine where adults, children or animals may walk on the cord.
· Do not rest anything on the power cord. · If an extension cord is used, be sure that all products plugged into
the extension cord do not exceed the extension cord ampere rating.

A. Basket B. Cabinet C. Paper entry D. Shredder head

E. Power switch F. LEDs (red and green) G. Viewer

ASSEM BLY
NOTE: This shredder will operate only when used with the supplied
basket. The supplied basket has a built-in safety feature which prevents the shredder from operating if used with any other basket or if improperly assembled.
To assemble shredder: CAUTION Confetti cut shredders (Model PS80C-2 only) con-
tain sharp edges on the underside of the shredder head. Use caution when positioning the shredder head onto the bask et .
CAUTION Do not lock shredder head onto cabinet with bas-
ket installed. Damage will result to shredder basket and cabinet.
1. Position shredder head over cabinet. Place shredder head into top of cabinet as shown in Figure 1.
2. Firmly push down on four corners of shredder head to " lock" shredder head into position.
3. Push basket into shredder cabinet as shown in Figure 1. Push basket front in firmly so edges of basket/ cabinet are aligned properly.

Figure 1

NOTE: To disassemble, pull out basket, place foot on bottom of cabi-
net, and firmly pull up on shredder head.
2
https://manual-hub.com/

OPERATION
WARNING This product features an auto-start sensor. This
sensor will turn on the cutting blades whenever anything is inserted into the paper entry (while the power switch is in
the AUTO position). For the safety of pets and children, we recommend always moving the power switch to OFF and unplugging when-
ever the shredder is unattended or not in use.
1. Assemble shredder head to basket (see " ASSEMBLY" ). 2. Remove any large paper clips or other foreign objects (except sta-
ples and small paper clips) from paper. If folding paper to fit paper entry, adjust sheet capacity appropriately.
CAUTION Do not attempt to shred paper clips or other hard
materials (except staples and small paper clips) with this machine. Extensive use of paper clips or other hard materials will result in damage to the cutting system and will void the manufacturer' s warranty.
3. Be sure power switch is in the OFF (O) position. Plug shredder
into the proper power supply outlet.
4. Move power switch to AUTO (I) position. To clear the cutting
blades, the shredder will " run" for about 1 second immediately
after switching to AUTO (I). When the unit is turned on and in
standby mode (green LED lights), the shredder is ready to be fed paper through the paper entry. (See " TROUBLESHOOTING" if red LED is lit.)
WARNING NEVER insert hands or fingers into paper entry as
serious personal injury may result.
CAUTION Do not exceed recommended sheet capacity (see
" Product Usage Guide" on page 1).
5. Slide paper straight into paper entry until the shredder automati-
cally begins shredding.
The shredder automatically stops when shredding is complete.
Continue shredding as desired to a M AXIM UM shredding time of 15-20 minutes. At this time, the machine MUST be allowed to " cool dow n" for a MINIMUM of 25 minutes. (See " Cool-
Down Cycle" section for more information.)
If the shredder jams or shuts off before the maximum shredding time, see " Clearing a Jam" section for further instructions.
6. Move power switch to OFF (O) position when shredding is com-
plete.
7. Unplug power cord from outlet when shredder is unattended not in use.
8. Look through viewer to see if basket is full. If full, pull out basket and empty basket contents. Replace basket into cabinet.

Cool-Dow n Cycle
This shredder is protected with a special safety feature which prevents
the motor from overheating with extensive use. When shredding is attempted beyond the machine's maximum running time, the shredder will automatically shut off its motor until it has cooled to an acceptable operating level. This is normal and the
shredder will return to operation after the " cool-down" period. See " Product Usage Guide" (page 1) for maximum running time and related cooling or " off" time.
Clearing a Jam
If the shredder sheet capacity is exceeded or paper is not put in straight, a jam may result. See " Product Usage Guide" (page 1) for maximum sheet capacity for your shredder. In the case of a jam, the shredder' s red LED will light and the shredder will automatically stop until the jam is cleared.
To clear a jam:
1. Move the power switch to the REVERSE (R) position. (If waste
basket is full, empty it before clearing jam.) The shredder will reverse the paper to clear the jam.
2. If the shredder jams in reverse, move the power switch to AUTO
(I) and allow to run for about five seconds. If jam does not clear,
move power switch to REVERSE (R) again and allow to run for
about five seconds. Repeat this procedure until the jam is cleared. If necessary, use care to grasp the paper carefully and pull out to clear the jam.
3. Once the jam is cleared, move the power switch to AUTO (I) for continued shredding or OFF (O) if shredding is complete.
M AINTENANCE
Confetti cut shredders (Model PS80C-2) require regular (monthly) oiling of the cutting blades to maintain proper operation. Failure to oil the blades regularly could result in reduced sheet capacity performance, excessive noise during operation, paper jams and possibly shredder failure.
We recommend using only Pow ershred Lubricant #35250 (available by contacting Fellow es) or a vegetable-based oil (such as corn or canola) in a non-aerosol container w ith an extension nozzle.
CAUTION Never use flammable synthetic oil, petroleum-
based, or aerosol lubricants to oil the cutting blades. Some agents may combust, causing serious injury.
To oil the cutting blades:
1. From the top of the shredder, squeeze the recommended lubricant across the full width of the blades.
2. Move the power switch to AUTO (I) position and allow the blades
to run at least 3 seconds.
3. Move the power switch to REVERSE (R) position and allow it to
run for at least 3 seconds.
4. Repeat steps 2-3 above at least 3 times.

https://manual-hub.com/

TROUBLESHOOTING

Shredder w ill not operate.

a. Shredder is not plugged in.
b. Power switch is in the OFF (O) position. Move switch to AUTO (I) position.
c. Shredder is jammed. See " Clearing a Jam" section.
d. Shredder has exceeded the maximum run time and requires a " cool-down" time. See " Product Usage Guide" (page 1).
e. Shredder is not assembled properly. See " Assembly."

Shredder makes a loud squeaking or rubbing noise. (M odel PS80C-2 only)

Cutting blades need to be oiled REGULARLY. See " MAINTENANCE" section.

Shredder suddenly stops w hile shredding.

a. Shredder has exceeded the maximum run time and requires a " cool-down" time. See " Product Usage Guide" (page 1).
b. Shredder is jammed. See " OPERATION - Clearing a Jam."

Shredder shreds less than capacity. (M odel PS80C-2 only)

Cutting blades need to be oiled REGULARLY. See " MAINTENANCE" section.

Red LED is lit.

a. Shredder head is not assembled properly (Model PS80C-2 only). See " ASSEMBLY."
b. Paper is jammed. See " OPERATION Clearing a Jam."

Shredder runs for a few seconds after the paper has cleared the cutters. (M odel PS80C-2 only)

This is normal. The shredder runs a few seconds longer than the paper in order to keep the cutters clear of paper particles and reduce the chances of a jam.

LIMITED WARRANTY
Fellowes warrants the cutting cylinders of the machine to be free of defects in material and workmanship for 7 years from the date of purchase by the original consumer. Fellowes warrants all parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during the warrant period, your sole and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the appropriate location
listed in the Contact for Service section of this instruction manual.
Warrantor: Fellowes, Inc.

https://manual-hub.com/

Contact For Service Vos Contacts Fellow es Sus Contactos Fellow es

United States Canada

1-800-955-0959 1-800-665-4339

w w w .fellow es.com

Australia Tullamarine, Vic

Benelux Vianen, NL

Canada Markham, Ont.

France Rennes, I-V

Germany Garbsen, Han.

1789 Norwood Avenue · Itasca, Illinois 60143-1095 630-893-1600

Italy Camerano, AN

Japan

Poland

United Kingdom

Tok y o

Warsaw

Doncaster, S. Yorks.

https://manual-hub.com/

References

Manual-Hub.com - Free English product PDF Documents!