FCC Compliance Information Statement
Product Information
- Product Name: Omada Gigabit Rackmount/Desktop VPN Gateway
- Model Number: ER7406
- Responsible Party: TP-Link Systems Inc.
- Address: 10 Mauchly, Irvine, CA 92618
- Website: https://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- Email: sales.usa@tp-link.com
Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- 1) This device may not cause harmful interference.
- 2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
TP-Link Systems Inc. has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC Part 15. There is no unauthorized change made in the equipment, and the equipment is properly maintained and operated.
Issue Date: 2025-6-20
International Compliance
CE Mark Warning
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/.
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/.
Industry Canada Statement
CAN ICES-003 (B)/NMB-003(B)
BSMI Notice (Taiwan)
Safety Precautions and Notes:
- Use only the original power adapter or a power adapter of the type specified for this product.
- Before cleaning the product, unplug the power cord. Do not use liquid, spray cleaners, or a damp cloth for cleaning.
- Be cautious of moisture; do not spill water or other liquids onto the product.
- Slots and openings are provided for ventilation to ensure reliable operation and prevent overheating. Do not block or cover these openings.
- Do not place the product near heat sources. Do not place it in an enclosed space without normal ventilation.
- Do not disassemble or repair the product yourself. If the product is faulty, please contact the manufacturer or distributor.
Restricted Substances Declaration (RoHS equivalent)
This table indicates the presence of restricted substances in the product components.
| Unit | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| PCB | ○ | ○ | ○ | ○ | ○ | ○ |
| Enclosure | — | — | — | — | — | — |
| Power Board | — | — | — | — | — | — |
| Other Accessories | — | — | — | — | — | — |
Notes:
1. "Exceeds 0.1 wt %" and "Exceeds 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value.
2. "○" indicates that the percentage content of the restricted substance does not exceed the reference percentage value.
3. "—" indicates that the restricted substance is exempt.
Ukrainian Compliance Statement
The product is certified according to the rules of the UkrSEPRO system in accordance with the requirements of regulatory documents and the requirements provided by current legislative acts of Ukraine.
French Recycling Information
Packaging: Elements to be separated and deposited in the recycling bin.
WEEE Symbol: This device and its accessories are recyclable. Dispose of at a store or recycling center. Find collection points at www.quefairedemesdechets.fr. Prioritize repair or donation of your device!
Safety Information
- Keep the device away from water, fire, humidity, or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link Systems Inc.
- Place the device with its bottom surface downward.
- Plug the product into wall outlets with an earthing connection through the power supply cord.
- The plug on the power supply cord is used as the disconnect device; the socket-outlet shall be easily accessible.
- The operating temperature for the device shall be within 0°C to 40°C (32°F to 104°F).
Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Use this product with care and operate at your own risk.
Explanations of Symbols on the Product Label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.
General Symbols
| Symbol | Explanation |
|---|---|
| CE | European Conformity Mark |
| FC | Federal Communications Commission (USA) |
| UKCA | United Kingdom Conformity Assessed Mark |
| EAC | Eurasian Conformity Mark |
| ♻️ | Waste Electrical and Electronic Equipment (WEEE) Recycling Symbol |
| ? | French Recycling: Separate for collection |
| ⚠️ | Caution, risk of electric shock |
| ? | Caution, hot surface |
| ⚡ | Dangerous voltage |
| ? | For indoor use only |
| ⏻ | Stand-by |
| ⏼ | "ON"/"OFF" (push-push) |
| ? | Disconnection, all power plugs |
| ➖ | Fuse |
| ⏼ N | Fuse is used in neutral N |
| ⏼ | Protective earth |
| ⏼ | Earth |
| ⏼ | Functional earthing |
| ⏼ | Class II equipment |
| ⏼ | Class II equipment with functional earthing |
| 〰️ | Alternating current (AC) |
| ➖ | Direct current (DC) |
| ⏼ | Polarity of d.c. power connector |
| ⏼ | Frame or chassis |
| VI | Energy efficiency Marking |
| ? | Caution, avoid listening at high volume levels for long periods |
| ℹ️ | Operator's manual |
| ⚠️ | Caution |
| m | Switch of mini-gap construction |
| μ | Switch of micro-gap construction (for US version) / Switch of micro-gap / micro-disconnection construction (for other versions except US) |
| ε | Switch without contact gap (Semiconductor switching device) |
