Inventum AKO6015ZWA Range Hood Parts Diagram
Component Parts
The following is a breakdown of the components for the Inventum AKO6015ZWA range hood, as illustrated in the provided diagram.
- 11: Grease Filters (2 units) - These are the mesh filters designed to capture grease.
- 12: Fasteners/Clips - Small components likely used for securing parts.
- 6: Lighting/Switch Assembly - This unit appears to house the lighting and possibly control switches.
- 10: Cover/Cap - A small circular cover, possibly for a light or vent.
- 5: Motor and Fan Assembly - Contains the fan unit and associated wiring for ventilation.
- 4: Circular Component - A cylindrical part, its function is not explicitly defined but could be a light cover or a filter component.
- 7: Mounting Bracket/Strip - A metal strip with holes, likely for mounting or securing.
- 2: Filter Support/Grille - A component that holds or supports a filter or acts as a grille.
- 3: Base Plate/Support - A flat plate that forms the base or support for other components.
- 8: Screws (2 units) - Fasteners used for assembly.
- 9: Mounting Bracket/Clip - A bracket or clip used for securing the unit.
The main body of the range hood is also depicted, showing its overall structure and ventilation outlets.
Revision Date: XX-XX-XXXX