SONOFF SwitchMan M5 Smart Wall Switch
User manual V1.2
Product Introduction
The SONOFF SwitchMan M5 is a smart physical wall switch. After pairing with the eWeLink App, it allows for remote control of connected devices via a smartphone, setting schedules, and sharing control with family members.
The product is available in three sizes: 80, 86, and 120, with options for 1, 2, or 3 circuits.
Wi-Fi Signal Indicator Status:
| Indicator Status | Status Description |
|---|---|
| Flashes (one long and two short) | Bluetooth Pairing Mode |
| Flashes quickly | Compatible Pairing Mode |
| Keeps on | Device is Online |
| Flashes quickly once | Fail to Connect to Router |
| Flashes quickly twice | Connected to Router but Fail to Connect to Serve |
| Flashes quickly three times | Firmware Updating |
Note: The device weight is less than 1 kg. The installation height of less than 2 m is recommended.
Features
The SwitchMan M5 offers various smart features:
- Remote Control ?️
- Single/Countdown Timing ⏱️
- Voice Control ?️
- Share Control ?
- Smart Scene ?
- Inching Mode ↩️
- Camera Linking ?
- Group Control ????
- History Operation Record ?
- LAN Control ?
Operating Instruction
1. Power off
Before installation, ensure the power is turned off. Warning: For safety, installation and maintenance should be performed by a qualified electrician. Do not touch wiring terminals while the device is powered on to avoid electric shock.
2. Wiring instruction
Diagrams illustrate the wiring for 80/86: 2C and 120: 3C models. Ensure all wires are connected correctly.
3. Download the eWeLink App
Download the eWeLink app from the App Store or Google Play. The app is available for Android™ and iOS.
QR Code for eWeLink App: [QR Code]
4. Power on
After powering on, the device enters Bluetooth Pairing Mode, indicated by a Wi-Fi LED indicator flashing in a cycle of two short and one long flash. If not paired within 3 minutes, it exits this mode. To re-enter, long-press the pairing button for 5 seconds.
5. Add device
In the eWeLink App, tap '+' and select 'Add Device'. Follow the on-screen prompts to complete the process.
Compatible Pairing Mode
If Bluetooth pairing fails, use the 'Compatible Pairing Mode'.
- Long-press the pairing button for 5 seconds until the Wi-Fi LED indicator shows two short flashes and one long flash. Press again for 5 seconds until the indicator flashes quickly to enter Compatible Pairing Mode.
- In the eWeLink App, tap '+' and select 'Compatible Pairing Mode'.
- Enter Wi-Fi password, tap 'Next', then 'Connect'. Select the Wi-Fi SSID 'ITEAD-******' and enter the password '12345678'. Return to the eWeLink App and tap 'Next' to complete pairing.
Specifications
| Model | M5-1C-80, M5-2C-80, M5-3C-80 M5-1C-86, M5-2C-86, M5-3C-86 M5-1C-120, M5-2C-120, M5-3C-120 |
|---|---|
| Input | 1C: 100-240V~50/60Hz 10A Max 2C: 100-240V~50/60Hz 10A Max 3C: 100-240V~50/60Hz 6A Max |
| Output | 1C: 100-240V~50/60Hz 10A Max 2C: 100-240V~50/60Hz 5A/Gang 10A/Total Max 3C: 100-240V~50/60Hz 2A/Gang 6A/Total Max |
| Max. load | 1C: 2200W 2C: 2200W(1-1100W/Gang) 3C: 1320W(1-440W/Gang) |
| LED load | 1C: 300W/220V, 150W/110V 2C: 300W/220V/Gang, 150W/110V/Gang 3C: 100W/220V/Gang, 60W/110V/Gang |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Bluetooth Standard | 4.2 BLE |
| App operating systems | Android & iOS |
| Working temperature | -10°C~40°C |
| Shell material | PC V0 |
| Dimension | 80: 86x71x41.5mm 86: 86x86x41.5mm 120: 120x74x41.5mm |
Factory Reset
Deleting the device on the eWeLink App restores it to factory settings.
Common Problems
Fail to pair Wi-Fi devices with eWeLink APP
- Ensure the device is in pairing mode. It exits automatically after 3 minutes if not paired.
- Turn on location service and grant permission for Wi-Fi list information.
- Ensure your Wi-Fi network runs on the 2.4GHz band.
- Enter the correct Wi-Fi SSID and password, without special characters.
- Pair the device close to the router for a good signal.
- Try pairing in compatible mode.
Wi-Fi devices "Offline" issues
Check the Wi-Fi LED indicator status:
- LED indicator blinks once every 2s (fail to connect to router): Check Wi-Fi SSID/password, ensure no special characters, check router capacity, Wi-Fi signal strength, and MAC address whitelist.
- LED indicator flashes twice on repeated (fail to connect to server): Check internet connection, router capacity, and contact ISP if server addresses are blocked.
Server addresses to check with ISP:
- cn-disp.coolkit.cc (China Mainland)
- as-disp.coolkit.cc (Asia except China)
- eu-disp.coolkit.cc (EU)
- us-disp.coolkit.cc (US)
If problems persist, submit an issue via 'Help & Feedback' in the eWeLink App.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any interference received. This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Minimum distance of 20cm between the radiator and your body is required. The transmitter must not be co-located or operated with any other antenna or transmitter.
This Class B digital device has been tested and found to comply with FCC limits designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and radiates radio frequency energy. If interference occurs, try to correct it by reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or technician for help.
Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment types M5-1C-80, M5-2C-80, M5-3C-80, M5-1C-86, M5-2C-86, M5-3C-86, M5-1C-120, M5-2C-120, M5-3C-120 comply with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/usermanuals
