Connects2
User Manual for CONNECTS 2 models including: Isuzu D-Max RT50, Isuzu MU-X, Suzuki Baleno, Suzuki Kizashi, Suzuki SX4 S-Cross, Isuzu D-Max RT50 Facelift, Suzuki Alto, Suzuki Jimny, Suzuki Swift, Suzuki Vitara MK4-LY, CAM-SZ2-RT Reverse Camera Retention Interface, CAM-SZ2-RT, Reverse Camera Retention Interface, Camera Retention Interface, Retention Interface, Interface
il y a 16 heures — This lead is compatible with vehicles which feature. OEM touch screen units. User Manual. Prior to Installation. Read the manual prior to installation.
16 hours ago — Read the manual prior to installation. Technical knowledge is necessary for ... Remove the vehicles head unit by following the manufacturer's instructions/.
File Info : application/pdf, 2 Pages, 772.91KB
DocumentDocumentUser Manual CAM-SZ2-RT Reverse Camera Retention Interface For select Isuzu & Suzuki vehicles APPLICATION: Isuzu D-Max (RT50) Isuzu MU-X Suzuki Baleno Suzuki Kizashi Suzuki SX4 S-Cross 2012-2015 2013-2020 2015 > 2009-2014 2013 > Isuzu D-Max (RT50 Facelift) 2021 > Suzuki Alto 2009 > Suzuki Jimny 2018 > Suzuki Swift 2010-2017 Suzuki Vitara (MK4/LY) 2015 > Allows for the retention of the factory OEM reverse camera when upgrading to an aftermarket head unit. This lead is compatible with vehicles which feature OEM touch screen units. DISCLAIMER: Prior to Installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure you use the correct tools to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. Technical Support Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible. This will speed up the process and help us to help you. Please use our dedicated online technical support centre: support.connects2.com CONTENTS · Reverse Camera Retention Adapter · Instructions Connects2Vision INSTALLATION 1. Remove the vehicles head unit by following the manufacturer's instructions/ guidelines. Once removed, disconnect all the power connections. 2. Connect the female 8-way ISO connector from the CAM-SZ2-RT to a separate ISO T-harness or steering wheel control harness (sold separately). 3. Connect the vehicles green 5-way reverse camera connector to the equivalent found on the CAM-SZ2-RT. 4. Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio. 5. Connect the 8-way ISO connector to the head unit. When done, proceed to connect the main power and test the reverse camera's functionality before reassembling the dashboard. Note: when testing the head unit, ensure that within the `camera settings' menu, the camera preset is set to on (the location of this setting will differ from head unit manufacturer). Subscribe to our YouTube Channel for installation guides and tips... www.youtube.com/connects2 2 www.connects2.com