SKENINGE Pendant Connector Installation Guide
Product Information
The SKENINGE pendant connector is designed for use with the SKENINGE track system.
Maximum load for the track: 150W
Maximum load for the pendant connector: 5 kg / 11 lb
Important Safety Information
⚠️ IMPORTANT: Always shut off power to the circuit before starting any installation work.
In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Save these instructions for future use.
Installation Instructions
Follow these steps carefully to install the SKENINGE pendant connector.
Step 1: Prepare the Connector
Attach the pendant connector to its mounting bracket or base using two screws (2x). ?
Step 2: Insert into Track
Slide the prepared connector into the SKENINGE track. ➡️
Step 3: Attach Hook Mechanism
Connect the hook mechanism to the bottom of the pendant connector. ?
Step 4: Secure Connector
Secure the connector to the track using screws. ?
Step 5: Wiring Preparation
Identify the wiring terminals: L (Live), N (Neutral). Prepare the electrical wires for connection.
Step 6: Connect Wires
Connect the wires to the corresponding terminals (L and N). Ensure the wires are properly inserted and the terminal screws are tightened securely (3x). ?
Step 7: Re-secure Connector
Ensure the connector is firmly attached to the track with screws. ?
Step 8: Re-attach Hook
Re-attach the hook mechanism to the bottom of the connector. ?
Step 9: Final Insertion
Slide the connector fully into the SKENINGE track. ➡️
Step 10: Final Securing
Secure the connector to the track with screws. ?
Step 11: Adjust Slider
Insert the connector into the track. Adjust the slider on the connector to the desired position (1, 2, or 3) to control lighting zones or effects. Do not force the slider. ?️ ❌
Step 12: System Operation
The SKENINGE track system, with lights connected via the pendant connectors, can be controlled by wall switches typically labeled 1, 2, and 3, corresponding to the slider positions.
Seeking Assistance
If you are unsure about any part of the installation, consult the diagrams showing seeking advice from IKEA or a qualified professional. ❓ ? ℹ️