MiBoxer PLC Lighting Master (WiFi+2.4G)
Model: PLCW1
Characteristics
- Designed with PLC control solution, simple wiring, and Wi-Fi + 2.4 GHz wireless technology for intelligent control.
- 16 million colors, variable intensity (RGB, CCT, and brightness).
- Max. 1 Master associated with 12 RF 2.4 GHz remotes (control range: 30m).
- 18 built-in dynamic modes with jumps and gradual changes (for 2.4 GHz remotes only).
- Automatic transfer: Automatically transfers the remote signal to another remote, extending range infinitely.
- Automatic synchronization: The same dynamic mode is automatically synchronized, ensuring constant operation.
- "Do Not Disturb" function: Typically used during power outages to save energy.
- Compatible with the TUYA SMART application.
- Compatible with voice control from third parties like Alexa, Google Assistant, Yandex Alice, Tmall Genie, Baidu, and Xiaomi.
Product Parameters
| Product Name | PLC Lighting Controller (WiFi+2.4G) | Wi-Fi Standard | IEEE 802.11b/g/n 2.4Ghz |
| Model | PLCW1 | EMC Standards (EMC) | ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.3.2 |
| Input/Output Voltage | DC24V | Safety Standards (LVD) | EN 61347-2-11:2001+A1:2019, EN 61347-1:2015+A1:2021, EN 62493:2015+A1:2022 |
| Power | 480W, 20A | Radio Equipment (RED) | ETSI EN 300 400 V2.2.1 |
| Protocol | WiFi + 2.4GHz RF | Certification | CE, EMC, LVD, RED |
| Control Distance | 2.4G: 30m | ||
| Protection Rating | IP20 | ||
| Operating Temperature | -10~40°C |
Connection Diagram
The diagram illustrates the PLC Lighting Master connected to subordinate PLC lights. It shows connections to a power source (DC24V Input/Output). It depicts integration with cloud services (Tuya Cloud) and voice assistants (Alexa/Google) via a router. The effective remote control distance is shown as 30 meters.
Compatible RF 2.4 GHz Remotes
A visual catalog of compatible MiBoxer RF 2.4 GHz remote controls is provided, including models like B8, B0, B3/B3-B/T3, B4/B4-B/T4, S2-B/S2-W, S2W+, S1W+, S2-G, FUT100, FUT089, FUT089-B, C5, FUT092, FUT092-B, FUT088, FUT096, FUT096-B, and C8.
Linking/Unlinking
Linking
- Turn off the light for 10 seconds, then turn it back on.
- Briefly press the "Link" button 3 times within 3 seconds.
- The light will flash slowly 3 times ✔️ to confirm successful linking.
If the indicator does not flash, linking failed. Repeat the steps. Reconnection is not possible if the remote has already completed linking.
Unlinking
- Turn off the light for 10 seconds, then turn it back on.
- Briefly press the "Link" button 5 times within 3 seconds.
- The lights will flash rapidly 10 times, indicating successful unlinking.
If the indicator does not flash rapidly, unlinking failed. Repeat the steps. Lights not connected do not require unlinking.
Automatic Transmission and Synchronization
Automatic Signal Transmission: A Master controller can transmit remote signals to another Master within a 30m range. If a Master is within 30m, the remote control distance can be unlimited.
Automatic Dynamic Mode Synchronization: Multiple lights can synchronize if they are in the same dynamic mode and linked to the same remote (distance between lights less than 30m).
Dynamic Mode Selection
Dynamic Mode Table 1 (Default)
To activate static mode: When the light is in static mode, briefly press the "S+" button 5 times rapidly until the blue indicator flashes slowly 3 times.
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Mardi Gras | Adjustable |
| 2 | Automatic Color Change | |
| 3 | Sam | |
| 4 | Precious Stone | |
| 5 | Twilight | |
| 6 | American | |
| 7 | Party | |
| 8 | Slow Color Splash | |
| 9 | Mardi Gras |
Dynamic Mode Table 2 (Manual Change Required)
To activate static mode: When the light is in static mode, briefly press the "S-" button 5 times rapidly until the yellow indicator flashes slowly 3 times.
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Gradual Change of Seven Colors | Adjustable |
| 2 | White Light Gradual Change | |
| 3 | RGB Gradual Change | |
| 4 | Seven Colors Jump Change | |
| 5 | Random Change | |
| 6 | Red Light Gradual Change + 3 Flashes | |
| 7 | Green Light Gradual Change + 3 Flashes | |
| 8 | Blue Light Gradual Change + 3 Flashes | |
| 9 | White Light Gradual Change + 3 Flashes |
*Models C5, FUT096, FUT096-B, S2-B, S2-W, S2W+, S2B+ do not support mode changes.
"Do Not Disturb" Mode
Activation (Default): Used in areas prone to power outages to save energy.
Via Remote Control
Activate: Press "OFF" three times in three seconds, then press "ON" three times. Successful activation is indicated by the LED flashing four times rapidly ✔️.
Attention: When the light is off, it will turn off once after power is cut and restored. The user must power cycle twice or use the app/remote to activate. When the light is on, it will turn on once after power is cut and restored.
Deactivation
Deactivate: Press "ON" three times in three seconds, then press "OFF" three times. Successful deactivation is indicated by the LED flashing four times slowly ❌.
Attention: The light will always be on after a single power cycle if the "Do Not Disturb" mode has been deactivated.
Smartphone App Control (Tuya Smart)
Network Configuration
- Plug the controller into power.
- Verify the indicator flashes rapidly (2 times/sec) ?. If not, press and hold "SET" until it flashes rapidly, or power cycle the controller 6 times.
- Connect your phone to a 2.4 GHz Wi-Fi network ?.
- Open the Tuya Smart app, go to the home page, and tap "+" ➕.
- Select "Lighting", then "Light Source (BLE + Wi-Fi)".
- Follow the app's instructions to complete setup.
App Control of "Do Not Disturb" Mode
In the app, select the light or group. Tap "More" (or similar) .... Tap "Power-on behavior" ⚙️. Toggle the "Do Not Disturb" setting to activate or deactivate.
Voice Control Instructions
Add the device in the [Tuya Smart] app first, then follow the steps.
Alexa Voice Control
- Open the Alexa app.
- Tap "More" (bottom right) ....
- Tap "Skills & Games" ?.
- Tap the search icon (top right) ?.
- Search for "Smart Life".
- Tap the "Smart Life" skill and follow instructions to enable voice control.
Google Home Voice Control
- Open the Google Home app.
- Tap "+" (top left) ➕.
- Tap "Set up device" ⚙️.
- Tap "Works with Google" ?.
- Tap the search icon (top right) ?.
- Search for "Smart Life".
- Tap the "Smart Life" skill and follow instructions to enable voice control.
Attention and Safety Precautions
- Ensure the device is powered off ? during installation for safety.
- Verify the input voltage is compatible with the device.
- Unauthorized disassembly by non-professionals may damage the device ❌.
- Avoid using the device near large metal surfaces or areas with strong electromagnetic waves ⚡, as this can severely affect control distance.
- Avoid prolonged use in humid or high-temperature environments ?️.
