Fire-Boltt Aero True Wireless Earbuds

Important Note

Instructions are very important in the case of True Wireless earbuds. Please read this manual carefully at every step, so that you do not encounter any issues.

Product Overview

The Fire-Boltt Aero True Wireless Earbuds package includes:

• Earbuds: Two wireless earbuds designed for audio playback and calls.
• Charging Case: A portable case to store and charge the earbuds. It features a Type-C charging port.
• Silicon Ear Tips: Multiple sizes of ear tips are provided for optimal fit, comfort, and sound isolation.

Key features on the earbuds include:

• Indicator Light: Shows charging status or pairing mode.
• Vent Holes: Designed for acoustic performance.
• Touch Controls: Capacitive touch areas on each earbud for managing music, calls, and voice assistants.
• Charging Points: Magnetic connectors on each earbud that align with the charging pins in the case.

Getting Started

First Time User

• It is recommended to fully charge the earbuds and charging case before first use.
• Place both earbuds in the charging case. Connect the supplied Type-C cable to the charging case and a USB-A (5V/1A) power adapter.
• Use the correct silicon ear tips (supplied in the box) for the best sound effect and comfort.

Power ON/OFF (Auto Mode)

• Power ON: Open the charging case flap. Take the earbuds out of the case. They will automatically power on and enter pairing mode.
• Power OFF: Place both earbuds back into the charging case and close the flap.

Note: Earbuds will go into standby mode automatically if no signal is detected for more than 5 minutes from a playback device. They will automatically shut down if not connected for 3 minutes. After connection, if there is no operation for 30 seconds, they will enter standby mode. Low battery alert sound: 3.4V, low battery automatic shutdown: 3.0V, low battery alert cycle: 2 minutes.

Power ON/OFF (Manual Mode)

• Power ON: When in OFF mode (or if earbuds have been out of the charging case for a long time), touch and hold one earbud for 5 seconds. Repeat for the other earbud. Once both earbuds are "ON", they will connect to each other and enter pairing mode (follow Pairing & Connect) or connect to an already paired device.
• Power OFF: When in "ON" mode, touch and hold either earbud for 5 seconds. The earbud will switch off.

Pairing & Connect

1. Open the charging case flap. The earbuds will connect to each other and enter pairing mode automatically.
2. Start Bluetooth on your playback device.
3. Enter "Pair New Device" on your playback device.
4. Check and select "Fire Pods Ninja Pro 401" from the list of available devices.
5. Once paired, remove the earbuds from the charging case to start enjoying your Fire Pods Ninja Pro 401.

Note: Once paired, the earbuds will connect automatically as soon as they come within the recommended Bluetooth range of the paired playback device with Bluetooth turned ON.

Touch Controls

Music Control

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Volume UP: Triple tap the right earbud.
• Volume Down: Triple tap the left earbud.

Call Control

• Answer Call: Single tap on either earbud while an incoming call is received.
• End Call: Single tap on either earbud while an ongoing call.
• Reject Call: Press and hold on either earbud while an incoming call is received.

Voice Assistant

• Activate Voice Assistant: Touch and hold either earbud.

Charging Procedure & LED Indicators

Earbuds Charging

Place the earbuds in the charging case and close the flap/cover. A green light blinks once on the charging case to indicate charging has started.

Charging Case Charging

Connect the supplied Type-C cable to the charging case and any USB-A (DC5V/1A) power adapter.

LED Indicator Status

• Low Battery (Case): Orange light comes ON and goes OFF in 3 seconds.
• Charging ON (Case): Constant Orange light ON (when connected to power supply).
• Fully Charged (Case): Green light slowly blinks once and then goes OFF (when connected to power supply).

Specifications

Frequently Asked Questions (FAQs)

Q: Only a single earbud has sound, or the earbuds are out of sync during music listening or calls?

A: Delete the earbud name from your device's Bluetooth settings and turn off Bluetooth. Place the earbuds back into the charging case, then re-pair them.

Q: How to know the power of the charging case?

A: Open and close the charging case flap. Check the LED light on the case. If it shows orange, it indicates low battery, and the device needs charging.

Q: The charging case is not charging the earbuds?

A: Ensure the charging case has sufficient power. Please follow the charging procedure outlined in this manual.

Q: The charging case is not getting charged?

A: It is recommended to use the supplied Type-C charging cable for charging the case. Try replacing the charging cable or the USB power adapter (recommended: DC5V/1A).

Cautions

• Please follow all instructions in this manual.
• Do not immerse this product or its parts in water, as this may damage the product permanently.
• Do not use abrasive cleaners to clean this product.
• Do not dispose of the product in fire or high temperatures, as this may cause the built-in battery to explode.
• Do not use the product roughly.
• Do not disassemble or modify the device for any reason, as the product may start malfunctioning.
• Do not charge the charging case with a charger exceeding the recommended current and ampere ratings, as this may damage the product's battery.
• Do not use the earbuds at maximum volume for extended periods, as this may damage your hearing.
• Do not use the earbuds during thunderstorms, as this may cause the earbuds to malfunction and experience signal interruptions.
• Please avoid using the product near large Wi-Fi routers or high-frequency transmitting devices, as this may cause interference in music listening or during calls.
• Please use this product within the recommended range with no physical barriers between the playback device and the product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.