Introduction
Features
- Fuel supply control
- Multi-GNSS
- Location data re-upload
- Anomaly alert (vibration, over-speed, power-off, etc.)
- Driving behavior analysis
- ACC detection
- Smart power saving
Operating Environment
Operating voltage: 12-90VDC
Internal backup battery: 3.7V/80mAH battery
Operating current: 22mA @12V
Standby current: 3mA @12V
Operating temperature: -20°C to 70°C
Storage temperature: -40°C to +85°C
Positioning accuracy: <10m
Location modes: GPS, BDS, AGPS, and LBS
Frequency Bands
GSM: B2/B3/B5/B8
Overview
Appearance
The device is a compact black unit with a camera-like lens on one side and a multi-pin connector on the other. It is accompanied by a wiring harness featuring colored wires (red, orange, white, yellow, black).
Connotations of Indicators (Red LED)
| Indicator State | Meaning |
|---|---|
| Keep on | Power is connected, GPS is positioned, GSM is working |
| Fast flashing | Power not connected, GPS positioned, GSM working |
| Normal flashing | Power is connected, GPS is not positioned, GSM is working |
| Slow flashing | Power is connected, GPS is positioned, GSM is not working |
| Off | Power is not connected, GPS is not positioned, GSM is not working |
Note: By default, when the device is stationary for 3 minutes, the LED will automatically turn off and wake up after a vibration.
Installation
Inserting the SIM Card
Step 1: Prepare a proper SIM card.
SIM Card Types: Standard [X], Micro [✓], Nano [X]
Step 2: Insert the SIM.
After the SIM card is inserted, the device powers on using the backup battery. If the device fails to power on due to low battery, connect the device to the external power.
Note: The SIM card must be inserted correctly, have GPRS services activated, and not be in arrears. If the SIM is identified and requires a PIN, please disable the PIN request.
Installing the Device
Product wiring diagram
1. Use a multimeter to find out the positive and negative terminals of the vehicle battery and the ACC line.
2. Connect the red wire (positive) of the device configuration power cable to the positive terminal of the vehicle battery.
3. Plug in the connector as shown in the figure below.
Device wiring description
The wiring involves connecting the device to the vehicle's battery and ignition system. Key connections include:
- Red wire (+) connects to the positive terminal of the battery, protected by an over-current fuse.
- Orange wire (ACC) connects to the ignition switch.
- White wire (Petrol on/off) connects to the ignition switch and a relay.
- Yellow wire connects to the pump line and pump.
- Black wire (-) connects to the negative terminal of the battery.
- A relay is used, with connections to the white wire and the pump line.
Mounting Positions
Car Mounting Position
Recommended locations include: Under the rear windshield, Around the dashboard, Under the front trim panel.
Motorcycle Installation Position
Recommended location: Behind the seat.
Electric Car Installation Location
Recommended locations include: Behind the seat, Front end position, Near the code meter, Inside the front cover.
Product Features
| Content | Function | Description |
|---|---|---|
| Positioning function | Timed tracking | Transmit back the positioning information such as latitude and longitude according to the set interval time. |
| Street map | 360 degree high-definition map | |
| Speeding alarm | When driving over speed, the locator will send an alarm to your cell phone. | |
| Vibration alarm | Built-in vibration sensor, continuous vibration of the vehicle, the device will immediately send alarm alerts. | |
| Electronic fence | When the car driving range exceeds the specified area, the platform will send alarm information. | |
| History track | Can play back 90 days of the track, playback the speed, direction, stay time and other content. | |
| Displacement alarm | When the vehicle encounters illegal operation or theft, the fuel and electricity can be cut off remotely by computer or cell phone APP. | |
| Fleet management | 1 cell phone can manage multiple devices, or 1 device multiple cell phone management. |
Analysis of Common Problems
| Failure Phenomenon | Failure Analysis | Treatment Method |
|---|---|---|
| GPS is not positioned | Determine whether to use the terminal in areas with poor GPS signals, such as near tall buildings or underground parking lots. | Move the vehicle to a location with a good signal. Use the terminal. |
| Determine whether the front windshield of the vehicle has metal heat insulation film affecting the signal reception. | If there is a film, change to other vehicles to test whether the blue light is always on. If other vehicles without film show no problem, then the vehicle is caused by the film. | |
| Determine whether there is a shield or signal jammer on or around the car. | If there is a shield or source of interference, remove the shield or source of interference and try to reinstall. | |
| GSM is not working | Determine whether the SIM card is installed properly. | Check whether the SIM card is installed in place. |
| Determine if there is dirt or poor contact on the metal surface of the SIM card. | Wipe the metal chip surface with a clean cloth or repeatedly insert and remove the card several times. | |
| Determine if the vehicle is in a place with no mobile network, such as an underground parking lot. | Please drive the vehicle to a place with a good network signal and try to reinstall it. | |
| Determine whether the server background is normal. | Ask if the server of the background management platform is normal. | |
| Determine whether the SIM card status is normal or not. | Check whether the status of the SIM card is normal through the SIM card inquiry platform. | |
| Determine whether there is a shield or signal interferer on the car or around. | If there is a shield or source of interference, remove the shield or source of interference and try to reinstall. |
