DS18 PSW12.4D 12" Dual Voice Coil Shallow Subwoofer
Owner's Manual
Specifications
Nominal Diameter | 12" / 304.8 mm |
Nominal Impedance | 4+4 OHMS |
RMS Power Handling | 600 Watts |
MAX Power Handling | 1200 Watts |
Sensitivity (1w/1m) | 85 dB |
Frequency Response | 20-600 Hz |
Recommended Lo Pass Crossover | 80 Hz |
Motor
- Voice Coil Diameter: 3" / 76.2 mm
- VC Former Material: Aluminum
- Winding Material: Copper
- Cone Material: Water Resistant PPI
- Surround Material: Rubber
- Basket Material: Steel
- Basket Color: Matte Black
- Magnet Material: Ferrite
- Magnet Weight: 68 Oz
- Displacement Volume: 0.95 L / 0.033 ft³
Thiele & Small Parameters
Equivalent Volume (Vas) | 47.6 L / 1.68 ft³ |
Excursion (one way) (Xmax) | 9.5 mm |
Free Air Resonance (Fs) | 31 Hz |
Mechanical Factor (Qms) | 3.821 |
Electrical Factor (Qes) | 0.932 |
Total Factor (Qts) | 0.749 |
Moving Mass (Mms) | 201.2 g |
Compliance (Cms) | 0.13 mm/N |
BI Factor (Bl) | 9 |
Voice Coil Inductance (Le) | 2.5 mH |
Diaphragm Area (Sd) | 510.71 cm² |
DC Resistance (Re) | 3.8+3.8 OHMS |
Efficiency Bandwidth Product (EBP) | 33.2 |
Recommended Enclosure
Sealed Internal Volume (minimum): 28 L / 1 ft³
Sealed Box Output Response (F3): 40 Hz
Measurements
Overall Diameter | 12.2" / 310 mm |
Overall Depth | 3.9" / 100 mm |
Front Mount Baffle Cutout | 10.6" / 270 mm |
Mounting Depth | 3.3" / 84 mm |
Motor Diameter | 8" / 203 mm |
Diagram Description: Subwoofer Dimensions and Frequency Response
Subwoofer Dimensions: A circular diagram shows the overall diameter of 12.2" (310 mm). A side profile diagram illustrates the overall depth of 3.9" (100 mm), the mounting depth of 3.3" (84 mm), and the front mount baffle cutout diameter of 10.6" (270 mm). The motor diameter is shown as 8" (203 mm).
SPL Frequency Response Graph: A line graph plots Sound Pressure Level (SPL) in decibels (dB) on the Y-axis against Frequency in Hertz (Hz) on the X-axis. The graph shows a typical subwoofer response curve, starting around 20 Hz, rising to a peak, and then gradually decreasing as frequency increases, extending up to 600 Hz. The peak response is observed in the lower to mid-bass frequencies.
Warranty
For more information on the warranty policy, please visit the DS18 website at DS18.com.
DS18 reserves the right to change products and specifications at any time without notice. Images may or may not include optional equipment.
Warning
WARNING: Cancer and Reproductive Harm. Visit www.P65Warning.ca.gov for more information.
Recommended Box Dimensions
Diagram Description: Enclosure Dimensions and Wood Cuts
External Box Dimensions: The recommended enclosure has external dimensions of 25.59" (650 mm) in width, 13.78" (350 mm) in height, and 6.98" (177.3 mm) in depth. The material thickness for the box construction is specified as 1/2" (15 mm).
Net Internal Volume: The recommended net internal volume for the enclosure is 28.3 Liters (1 ft³).
Wood Cuts: The following wood cuts are required for construction:
- Top - Bottom: 2 pieces, each measuring 25.59" (650 mm) x 6.98" (177.3 mm)
- Front - Rear: 2 pieces, each measuring 25.59" (650 mm) x 10.31" (262 mm)
- Left - Right: 2 pieces, each measuring 5.80" (147.3 mm) x 12.60" (320 mm)
A circular diagram indicates a cutout diameter of 10.79" (274 mm) for the subwoofer mounting.