Instructions for Lysslynge models including: HDL0327 LED Flame Lamp
3, After opening the package, the transformer is allowed to connect and switching on power supply. 4, The LED bulbs are not replaceable, it is strictly forbidden to replace the light bulb.
Product Parameter: Size Power cord Product Power Working Temperature Material IP Rank Application INSTRUCTION LED FLAME LAMP 7m 3m 3.6W -10-40 PP IP44 Indoor / Outdoor Installation Instructions: 1, Open the package and take out the wire. Confirm whether the parts are complete before installation, and whether the power supply meets the standard of using voltage. 2, Product belt hanger, can not be cut to use. Schematic Diagram Remote control instruction Safety Instructions 1, The flame lamp cannot connect to the socket directly, it must use the power adapter provided by the supplier. 2, The flame lamp cannot be soldered to another string light without permission. 3, After opening the package, the transformer is allowed to connect and switching on power supply. 4, The LED bulbs are not replaceable, it is strictly forbidden to replace the light bulb. 5, This product is only for decoration, not for children's toys. Please keep children who are under six years old away from this product. 6, Please turn off the power supply when not in use for a long time, and do not expose it in the harsh environment. 7, Please do not disassemble the product, including the shell and the converter. Use the remote control, you need to point to the infrared receiver point. Note: When the remote control distance is greatly reduced, the battery may not be enough. Please replace the new battery as shown on the back of the remote control. Battery type: CR2025 Made in ChinaAdobe PDF Library 20.12.80