The Babyliss E652E is a versatile grooming tool designed for precise hair trimming. This manual provides essential information for its safe and effective use.
Operating the Device
To operate, insert one AA alkaline battery with the positive terminal facing up. Turn the device on by rotating the base to align the marks (I).
Attaching and Removing Heads
Ensure the device is in the 'off' position. Gently place the desired cutting head onto the device and lock it by turning it to the left until the marks align. To remove, turn the head to the right and pull upwards.
Cutting Heads
- Rotary Cutting Head: For trimming nose and ear hair. Gently insert into the nostril or ear.
- Precision Cutting Head: For eyebrow grooming. Use with the included cutting guides for 3mm or 5mm cutting heights by sliding the guide onto the appropriate groove (A or B).
Maintenance
Turn the device to the 'off' position and remove the cutting head. Clear any accumulated hairs by blowing them away or using a small cleaning brush. The cutting head can be rinsed under running water, but ensure the main handle does not come into contact with water. Allow the head to dry completely before reattaching.
Safety Note: Do not use the device in the shower or bath.
